• 대한치과기공학회지
• /
• 제35권4호
• /
• pp.303-312
• /
• 2013

Purpose: In this research, non-linear three dimensional finite element models with contact elements were constructed. For the investigations of the distributions of contact stresses, 3 units fixed partial dentures model were studied, especially on the interface of the gold screw and cylinder, abutment screw. Methods: 3 types of models were constructed ; the basic fixed partial denture in molar region with 3 units and 3 implants, the intermediate pontic fixed partial denture model with 3 units and 2 implants, and the extension pontic fixed partial denture model with 3 units and 2 implants. For all types, the external loading due to chewing was simulated by applying $45^{\circ}$ linguo-buccal loading of 300 N to the medial crown. For the simulation of the clamping force which clinically occurs due to the torque, thermal expansion was provided to the cylinder as a preload. Results: Under 300 N concentrated loading to the medial crown, the maximum contact stress between abutment screw and gold screw was 86.85~175.86MPa without preload, while the maximum contact stress on the same area was 25.59~57.84MPa with preload. Conclusion: The preloading affected the outcomes of the finite element stress analysis. Reflecting the clinical conditions, the preloading conditions should be considered for other practical study utilizing FEA. For the study of the contact stresses and related motions, various conditions, such as frictional coefficient changes, gap between contact surfaces, were also varied and analyzed.

• 대한치과교정학회지
• /
• 제40권2호
• /
• pp.66-76
• /
• 2010

폐쇄성 수면무호흡(obstructive sleep apnea, OSA)은 수면 중에 반복적으로 상기도의 완전폐쇄나 부분폐쇄가 일어나는 질환으로서 흡기된 공기는 반드시 상기도라는 연조직 관(tube) 구조를 통과해야 하므로 상기도의 폐쇄경향은 관의 형태 및 관을 통과하는 공기의 유체역학적 특성에 따라서도 큰 영향을 받을 수 있다. 본 연구에서는 OSA 환자 3인의 치료 전 상기도 CT 이미지를 이용하여 개별화된 3차원 유한요소모델 A, B, C를 제작하고, 비공 당 170, 200, 230 ml/s의 흡기유량에 대하여 3차원 전산유체역학 해석을 시행하였다. 상기도의 유속, 음압 그리고 압력강하를 측정한 결과 관찰된 3개의 모델에서 모두 단면적이 가장 작은 부위에서 유속이 증가하였고, 음압이 크게 나타났다. 기도의 형태는 구개인두와 구인두 부위에서 좁아지는 형태를 가지며, 최소 단면적 영역과 하인두 단면적의 차이가 클수록 유속과 음압의 변화가 크게 나타났다. 비강 부위의 최고 압력과 최소 단면적 영역의 최저 압력의 차이를 의미하는 압력강하는 상기도 저항을 종합적으로 판단할 수 있는 유용한 지표이며, 유량에 따라 증가하였다.

• Composites Research
• /
• 제29권1호
• /
• pp.24-32
• /
• 2016

본 연구에서는 3D 아이소파라메트릭 쉘요소 모델을 사용하여 전단농화유체(STF: shear thickening fluid)가 함침된 케블라 페브릭(Kevlar fabric) 복합재의 방탄성능에 대하여 해석을 수행하였다. 다양한 적층복합재(12, 18, 20, 24-layer)를 대상으로 탄두 초기속도에 따른 충돌 후 속도(Residual velocity)를 측정하여 실험치와 비교하였다. SFT가 함침된 복합재의 방탄 성능의 효과를 검증하기 위하여 다양한 속도영역에서 STF가 함침된 것과 함침 되지 않은 것의 방탄성능을 비교하였다. STF가 함침된 케블라 페브릭은 450 m/s 이하의 저속에서는 비교적 큰 마찰효과를 일으키며 고속에서는 STF가 함침된 Kevlar fabric의 마찰효과는 기대할 수 없는 수준으로 오히려 역효과를 일으키는 것을 확인할 수 있었다. 연구를 통해 STF가 함침된 케블라 페브릭의 특성을 퇴화 3D 쉘 요소를 사용하여 효과적으로 모사할 수 있었으며, 실험 치와의 결과 비교를 통하여 그 유효성을 검증하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.3-5
• /
• 2001

Racetrack coils are used in many areas of superconductivity applications such as generators, motors, maglev, wiggler magnets and so on. The fabrication and characteristics of race-track type High Tc Superconducting (HTS) magnets were carried out. The Magnet is composed of 3 pancake coils wound by 37-filamental Bi-2223/ Ag-alloy tapes. Quench current ($I_q$) of both whole magnet and 3 pancake coils were measured. At 77K under the self-field, $I_q$ of magnet was 12A, while in the case of middle pancake coil, $I_q$ was 15A. The upper pancake coils of racetrack magnet with iron plates, magnet having optimized current distribution and initial magnet are compared with each other through 3D FEA, manufacturing and testing these magnets. The measured performance of the upper pancake coil #3 with iron plates improved by 50% on the basis of initial pancake coil #3. Quench current ($I_q$) of field winding was 12A. In addition, the fabrication processes and the characteristics of HTS magnet are described.

• 대한기계학회논문집 C: 기술과 교육
• /
• 제3권2호
• /
• pp.83-88
• /
• 2015

농용 트랙터는 일반적인 도로 주행이 아닌 논 또는 밭과 같은 험지에서 작업용으로 사용한다. 때문에 정적 하중 뿐만 아니라 동적 하중이 고려된 구조 해석이 진행되어야 한다. 하지만 동적 입력 하중을 계산하기 위해서는 다양한 작업기와 하중조건을 모사해야 하기에 실제 측정에 많은 시간과 노력이 소요된다. 이러한 노력들을 줄이기 위해서 본 연구에서는 상용 자동차와 동일하게 농용 트랙터를 위한 4 축 도로하중 시뮬레이터(4-Post Road Simulator) 모델을 개발하였다. 입력하중을 검증하기 위해 사내 험로 시험장에서 차축의 가속도 값과 바디프레임의 변형률(strain)을 측정하였다. 가속도 값은 동역학 모델의 입력 하중으로 사용하고 모드 중첩 법을 포함한 동역학 해석을 수행하여 변형률을 검증하였다. 이를 통해 험로 프로파일과 유사한 거동을 나타내는 4 축 도로하중을 구할 수 있었으며 신뢰성을 검증하였다.

• 대한조선학회논문집
• /
• 제60권4호
• /
• pp.278-287
• /
• 2023

This study aims to analyze and evaluate the structural strength of a 53ft Liquefied Natural Gas (LNG) tank container according to International Organization for Standardization (ISO) 1496-3, amidst growing global demand for LNG transportation. The research was conducted in two main stages: structural analysis using Finite Element Analysis (FEA) under various load conditions, and structural strength tests following ISO 1496-3 test procedures. The structural analysis was performed considering different loading conditions to assess the structural safety of the tank container. Calculated stresses were compared with allowable stress under specified load conditions. The structural strength tests were conducted at Mokpo National University's Subsea Umbilical cable Riser Flowline R&D Center, which provided a suitable testing environment. The study found that calculated stresses met the allowable stress under specified load conditions, confirming the structural safety of the tank container. Additionally, the maximum deformation and permanent deformation satisfied the design criteria for all test cases, indicating the container's structural strength meets requirements. The research also contributed valuable data for future structural strength tests of similar products and facilitated the development of safe and efficient LNG transportation solutions by developing effective test procedures in accordance with ISO 1496-3 standards.

• 마이크로전자및패키징학회지
• /
• 제18권2호
• /
• pp.29-33
• /
• 2011

솔더와 PCB Cu 패드와 솔더 경계면에서 발생하는 수직응력과 수평응력을 분석하여 PGA 패키지의 신뢰성 향상을 위한 리드핀의 형상설계에 대한 연구를 수행하였다. 이와 같은 연구를 위해 리드핀의 $20^{\circ}$ 각도 굽힘 변형과 50 ${\mu}m$ 인장조건에서 4인자 3수준의 다구찌 최적설계와 유한요소해석을 수행하였다. 해석결과에 의하면 리드핀의 헤드곡면과 PCB Cu 패드가 접촉하는 폭(d2)이 솔더에서 발생하는 응력감소에 가장 큰 영향을 미치는 인자로 계산되었다. 또한, 다 구찌법의 파라메타 설계에 의해 기존 리드핀 형상모델에 비해 약 18.7%의 등가 von Mises 응력이 감소하는 형상을 도출하였다. 한편, 최대 수직응력이 발생하는 위치가 PCB의 Cu 패드와 솔더의 외곽이 접촉하는 위치이고 최대 수평응력이 발생하는 위치가 SR 층과 솔더의 외곽표면이 접촉하는 위치임을 파악하여, PGA 패키지의 박리 불량은 솔더의 외곽부터 발생하여 내부로 진행될 것으로 예측되었다.

• Journal of Biosystems Engineering
• /
• 제28권4호
• /
• pp.305-314
• /
• 2003

The ROPS of an agricultural tractor is designed to protect its driver when the tractor overturns. Although the current OECD tests to determine whether the ROPS meets the requirements of the OECD regulation are desirable, they need long time to test. We experimental time and effort by using CAE. We conducted a finite element analysis for the ROPS design of a Dae-Dong tractor cabin in an attempt to reduce the design and manufacturing time. This study shows the interpretative skill using MARC(v.2000) for designing ROPS and difference between the results of testing and FEA. Design process is generally divided into two phases: a concept and a detail design. The concept design uses simple analysis to predict structural behavior, whereas the detail design involves a finite element analysis performed by the results of the concept design. This study focused on the detail design and used Patran(v.2000r2) and MARC(v.2000) of the MSC software corporation. The model consisted of 4812 elements and 4582 nodes. Four tests. specified in the OECD standards, were performed: (1) longitudinal loading test (2) rear crushing test (3) side loading test (4), and front crushing test. Independent analyses were also performed for each test, along with a sequential analysis. When compared, the results of the independent and sequential analyses were found to be similar to the test results.

• 천문학회보
• /
• 제36권2호
• /
• pp.155.1-155.1
• /
• 2011

The Korea Astronomy and Space Science Institute (KASI) and the Department of Astronomy at the University of Texas at Austin (UT) are developing a near infrared wide-band high resolution spectrograph, IGRINS (Immersion Grating Infrared Spectrograph). The white-pupil design of the instrument optics uses 7 cryogenic mirrors including 3 aspherical off-axis collimators and 4 flat fold mirrors. Two of the 3 collimators are H- and K-band pupil transfer mirrors and they are designed as compensators for the system alignment in each channel. Therefore, their mount design will be one of the most sensitive parts in the IGRINS optomechanical system. The other flat fold mirrors are designed within the limited area. Each of those includes the features of 3 axial hard points and 2 radial hard points with one spring plunger in order for the proper deflection of the mirror. The design work will include the computer-aided 3D modeling and finite element analysis (FEA) to optimize the structural stability and the thermal behavior of the mount models. The mount body will also include a tip-tilt and translation adjustment mechanism to be used as the alignment compensators.

• 구강회복응용과학지
• /
• 제21권1호
• /
• pp.1-14
• /
• 2005

The purpose of this study was to assess the loading distributing characteristics of implant prosthesis of internal connection system(ITI system) according to position and direction of load, under vertical and inclined loading using finite element analysis (FEA). The finite element model of a synOcta implant and a solid abutment with $8^{\circ}$ internal conical joint used by the ITI implant was constructed. The gold crown for mandibular first molar was made on solid abutment. Each three-dimensional finite element model was created with the physical properties of the implant and surrounding bone. This study simulated loads of 200N at the central fossa in a vertical direction (loading condition A), 200N at the outside point of the central fossa with resin filling into screw hole in a vertical direction (loading condition B), 200N at the centric cusp in a $15^{\circ}$ inward oblique direction (loading condition C), 200N at the in a $30^{\circ}$ inward oblique direction (loading condition D) or 200N at the centric cusp in a $30^{\circ}$ outward oblique direction (loading condition E) individually. Von Mises stresses were recorded and compared in the supporting bone, fixture, and abutment. The following results have been made based on this study: 1. Stresses were concentrated mainly at the ridge crest around implant under both vertical and oblique loading but stresses in the cancellous bone were low under both vertical and oblique loading. 2. Bending moments resulting from non-axial loading of dental implants caused stress concentrations on cortical bone. The magnitude of the stress was greater with the oblique loading than with the vertical loading. 3. An offset of the vertical occlusal force in the buccolingual direction relative to the implant axis gave rise to increased bending of the implant. So, the relative positions of the resultant line of force from occlusal contact and the center of rotation seems to be more important. 4. In this internal conical joint, vertical and oblique loads were resisted mainly by the implant-abutment joint at the screw level and by the implant collar. Conclusively, It seems to be more important that how long the distance is from center of rotation of the implant itself to the resultant line of force from occlusal contact (leverage). In a morse taper implant, vertical and oblique loads are resisted mainly by the implant-abutment joint at the screw level and by the implant collar. This type of implant-abutment connection can also distribute forces deeper within the implant and shield the retention screw from excessive loading. Lateral forces are transmitted directly to the walls of the implant and the implant abutment mating bevels, providing greater resistance to interface opening.