• 한국의상디자인학회지
• /
• 제22권1호
• /
• pp.1-13
• /
• 2020

The purpose of this study is to create a 3D avatar from 3D human body shape data using the CLO 3D virtual clothing program and to verify the feasibility of avatar production using the virtual clothing system for verifying size and shape. The research method was to select one virtual representative model that is the closest to the mean size of each body item for each age group. Using the 3D human body scan shape of a 40-69 years old male was applied to the CLO 3D virtual wearing system. Using the CLO 3D Avatar conversion menu, we verified the feasibility of creating a 3D avatar that reproduces the human body scan shape. In the dimension comparison between the 3D avatar and the fictitious representative model, the dimension difference was noticeable in height, circumference, and length. However, as a result, the converted 3D avatar showed less than a 5% difference in most human dimensions. In addition, since the body shape and posture were reproduced similarly, the utilization of the avatar was verified.

• 패션정보와 기술
• /
• 제13권
• /
• pp.51-59
• /
• 2016

• 복식문화연구
• /
• 제25권4호
• /
• pp.476-487
• /
• 2017

The purpose of this study was to suggest torso patterns that fit the three main body shapes of elderly obese women. To reduce time, costs, and also the trial and error needed to make patterns, the CLO program for 3D test wear was employed. Three virtual models for aged obese women were use, with the YUKA system used to produce torso patterns. 3D simulation of test wear and corrections was done to design optimal torso patterns. The results were as follows: First, for the three models of obese women's body shapes as realized by CLO 3D, Type 1 is lower-body obesity shapes, Type 2 is abdominal obesity shapes, and Type 3 is whole-body obesity shapes. Second, to design the study patterns, actual measurement values, back waist length and waist to hip length, were used. The armhole depth (B/4-1.5), front interscye (B/6+2.3), front neck width (B/12-0.5), front neck depth (B/12+0.5), front waist measurement (W/4+ 1.5+D), front hip measurement (H/4+2+0.5), and back hip measurement (H/4+3-0.5) were calculated using formulas. Third, according to the results of test-wearing the study patterns, reduced front neck width and depth improved the neck fit and reduced armhole depth bettered loose or plunging armhole girth and also reduced the sagging of bust c.. Also, tight sidesfrom aprotruded waist and abdomen improved with the increase of surpluses in the back waist and also back and front hip c. The exterior was enhanced by displacement of back and front darts, which distributed surpluses better.

• 복식문화연구
• /
• 제28권3호
• /
• pp.299-312
• /
• 2020

The purpose of this study is to create a shirt sloper suitable for an elderly male body shape by producing virtual models using a 3D-virtualization program, making a torso prototype using the Yuka CAD system, and employing 3D simulation to virtualize and calibrate the model. First, the following three types of obese dummies are implemented through the CLO 3D program: Type 1 exhibits body fat in the lower body; Type 2 exhibits an obese abdomen; and Type 3 displays a balanced form of obesity. Second, for the design of the shirt pattern, the waist back length (measured value+1), back armhole depth (C/10+12+3+0.5~1.5), front armhole depth (back armhole depth 0~1), front interscye (2C/10-1+0.5-0.5), armscye depth (C/10+2+3.5+ 0.5), back interscye (2C/10-1+1), front chest C (C/4+2.5+1), back chest C (C/4+2.5-1), front hem C (C/4+2.5+1(+2)), back hem C (C/4+2.5-1(+2)), cap height (AH/3-5), and biceps width (Front AH-1, Back AH-1) are calculated. Third, the virtual attachment of the shirt pattern is resolved by increasing the front and back armhole depths, and the front and rear wrinkles are improved by adding a back armhole dart. The front hem lift and lateral pull caused by the protrusion of the abdomen are amended by increasing the margin of the chest, waist C, and hip C, with the appearance improved by balanced margin distribution in the front, back, and side panels. The improved retail pattern with an increase in the front armholes C was balanced on the torso plate.

• 한국의류산업학회지
• /
• 제24권3호
• /
• pp.315-324
• /
• 2022

This study aims to verify the sewing technology and the expression of the virtual garment program by comparing the appearance similarity between the real and the virtual power shoulder jacket. To this end, the H and the X silhouettes of the power shoulder jacket were selected as the reference designs. After making the reference designs into real jackets by applying the human body dimensions of women in their twenties, virtual avatars and jackets were produced using CLO 3D programs. The results showed that the H-type with only expanded shoulders and less design variation had a high similarity between the reference photo and real garment, the real and virtual garment, and the reference photo and virtual garment. The power shoulder jacket of the reference picture was well reproduced in the real and virtual garments. Conversely, the X-type jacket, which is a tight fit and has many design variations, showed somewhat low similarity in the circumference items and the basic construction line. Especially in tight-fitted power shoulder jackets, the fact that shoulder angles and the essential items for pattern making cannot be reflected in reproducing virtual models was found to be a limitation in increasing the similarity of virtual clothing. Furthermore, the sewing system gap between the real and the virtual clothing exposed a difference in the appearance of virtual clothing.

• 한국의류산업학회지
• /
• 제15권6호
• /
• pp.963-970
• /
• 2013

The purpose of this study was to develop torso pattern of underweight female in their 20s~30s by using Clo 3D virtual garment simulation system. The results were as follows; first, as a result of analyzing torso somatotype, underweight women showed lower average than average values of whole women in their twenties and thirties in the items such as length, width, circumference, thickness except for height. Second, by using 3D virtual garment simulation, new torso pattern considered underweight female was development. The basic numerical formula were as follows ; bust girth B/2+3.5, armhole depth B/4+0.5, front waist girth W/4+0.5+0.7, back waist girth W/4+0.5-0.7, front hip girth H/4+1+0.5, back hip girth H/4+1-0.5, chest width B/6+3.1, back width B/6+4.5, neck width B/12+0.2 and neck depth B/12+1.7. Third, by reducing hollowed amount of front, back, and side line, and hollowed amount of back center line, the reduced quantity was included to darts amount. Number of dart was adjusted to two pieces so that darts amount was equally distributed to two darts. Forth, according to the results of the new torso pattern's appearance evaluation, it estimated more highly than existing pattern in silhouette and ease amount, confirming that new torso pattern was appropriate for the underweight women. This study is expected to serve as one of important basic data for ensuing studies that may utilize 3D virtual garment simulation system with 2D patterns, and also for future 3D pattern production program development.

• 패션비즈니스
• /
• 제16권4호
• /
• pp.137-151
• /
• 2012

This study aims to use the avatar sizing system of the 3D apparel CAD program instead of the existing 3D body scanners, and to commercialize 3D personal avatars. Towards these ends, the study examined a difference between a 3D avatar and actual body was determined to verify the 3D avatar sizing system. For the experiment, three subjects were selected, were measured as they were, and were made to undergo 3D body scanning and photographing. Then, using avatar sizing system on the 3D apparel CAD program, three types of virtual bodies, namely 3D avatars. The 3D avatar and actual body measurements were compared, and 3D avatars and 3D body-scanned shapes were likewise compared. As a result, the three types of actual bodies and their 3D avatars that were created based on the sizing system of the 3D apparel CAD program were overall similar. but, the thin body-YY type and the normal body-A type were different from their avatars. In the case of type B, who had a bulging abdomen, the 3D avatar was bigger than the actual body as measured. Also, in all body shapes, the girths around the chest, waist and abdomen were produced with exaggerated muscular amounts compared to their actual muscular amounts.

• 복식문화연구
• /
• 제31권1호
• /
• pp.124-140
• /
• 2023

This study analyzes traditional women's Hu costumes of the Tang dynasty, and deploys a creative fashion design to converge contemporary and traditional styles. In this costume, women wear a robe with striped or plain patterns in the lower part of the pants, and it appears frequently in red and yellow colors. Depending on the sleeve, it is either a round collar or a turn down collar robe. In the Hu hat, the huntuomao and juanyanxumao were leather and mili and weimao were used to prevent the sand from flowing. This study uses the CLO 3D program with the "moment" theme based on the Hu costume for women to deploy 4 pairs of fashion design and to produce works for 2 pairs. The 3D virtual clothing program demonstrates important effects in design deployment and pattern arrangement through its efficiency and convenience of clothing production. The CLO 3D program was closely combined with the 2D design and the 3D affect, and it heightened the efficiency in saving the processing time and energy of the sample clothes. Through facilitating the 3D digital fashion design, the production may reduce time needed and contribute to an effective economy, and it may compare digital fashion design to actual products as well as illustrate the potential of digital fashion design.

• 한국의류산업학회지
• /
• 제23권5호
• /
• pp.667-673
• /
• 2021

The purpose of this study was to obtain drape information and objective texture of fabrics easily and quickly by using a constructed fabric database. For the construction of the fabric database, 287 woven fabrics were examined by using the CLO fabric kit, KES-FB system, and drape test system. The k-means cluster analysis method was used to classify the fabrics into 7 grades. After correlation analysis of the fabric properties for each experiment, similar properties of the CLO fabric kit and KES-FB system were chosen, which were then designed to extract similar fabrics from the database. It was confirmed that inferring the drape information and objective hand feeling of fabrics was to some extent possible by extracting similar fabrics from the database. In this study, the primary hand and total hand value(THV) of KES-FB system, which was constructed by Kawabata and other experiments, were used to quantify the objective hand feeling, because they are the most widely used. However, these standards can be changed over time; in order to be applied within the clothing industry, these standards may have to be changed to some extent. Moreover, it is notable that although objective hand feeling cannot be expressed in the 3D virtual costume program, it can be easily derived from the constructed database. Additionally, it is expected that the existing 3D virtual costume program will express the costumes more realistically by improving these results.

• 한국의류산업학회지
• /
• 제23권6호
• /
• pp.826-835
• /
• 2021

The purpose of this study was to compare the similarity between actual and virtual pants using a virtual 3D CLO program. A subject corresponding to the average size of a women in her twenties was selected and an avatar with the same specifications was produced. Silhouettes of the pants were classified into trousers, slacks, and wide pants and images of actual and virtual pants were evaluated from the front, side, and back. The results were as follows: Overall, the resemblance of the trousers was evaluated higher than that of other pants. The average similarity of trousers was 4.20 at the front, 3.98 at the side, and 4.17 at the back, which was much like the actual clothing. In contrast, that of the slacks was 3.62, 3.73, and 3.79 and of the wide pants was 3.81, 3.53, and 3.97. The similarity between the actual and virtual clothing was relatively well reproduced when the shape of the pants was like the silhouette of the human body. However, if the pants were tight or loose, virtual fits failed to display the wrinkles caused by the tightness or the excessive slack. The virtual fit showed fewer wrinkles and did not depict the location and the shape of hemlines as accurately as the actual fit, although virtual fits adequately displayed the baseline and dart on the pants.