• Geomechanics and Engineering
• /
• 제17권6호
• /
• pp.573-581
• /
• 2019

Excavation of underground cavern and shaft was proposed for the construction of a ventilation facility in an urban area. A shaft connects the street-level air plenum to an underground cavern, which extends down approximately 46 m below the street surface. At the project site, the rock mass was relatively strong and well-defined joint sets were present. A kinematic block stability analysis was first performed to estimate the required reinforcement system. Then a 3-D discontinuum numerical analysis was conducted to evaluate the capacity of the initial support and the overall stability of the required excavation, followed by a 3-D continuum numerical analysis to complement the calculated result. This paper illustrates the application of detailed numerical analyses to the design of the required initial support system for the stability of underground hard rock mining at a relatively shallow depth.

• 대한조선학회논문집
• /
• 제35권4호
• /
• pp.98-108
• /
• 1998

중앙 단면도 등의 선박의 초기 구조설계는 여러 가지 이유로 2차원으로 설계되어 다른 설계부서에 도면으로 전달되고 있다. 본 연구에서는 기능이 서로 다른 여러 가지 컴퓨터 시스템사이의 데이터 교환을 위한 예제로, AutoCAD로 작성된 2차원의 초기 구조 설계 데이터를 구조해석(FEM) 시스템이나 상세설계 시스템(AutoDef)등의 다른 시스템에서 사용할 수 있는 데이터를 생성해 보았다. 이를 위해 STEP 제품모델의 방법에 따라 데이터가 정의 되었으며 2D 형상이나 3D 와이어프레임, 솔리드 모델등 다양한 형상을 다룰 수 있는 복합다양체 모델링 형상 도구인 ACIS가 사용되었다.

• 제어로봇시스템학회논문지
• /
• 제19권3호
• /
• pp.219-226
• /
• 2013

A distortion correction technique is presented to enhance the 3D scanning performance of a micro-size camera-projector system. Recently, several types of micro-size digital projectors and cameras are available. However, there have been few effort to develop a micro-size 3D scanning system. We develop a micro-sized 3D scanning system which is based on the structured light technique. Three images of phase-shifted sinusoidal patterns are projected, captured, and analyzed by the system to reconstruct 3D shapes of very small objects. To overcome inherent optical imperfection of the micro 3D sensor, we correct the vignetting and blooming effects which cause distortions in the phase image. Error analysis and 3D scanning results on small real objects are presented to show the performance of the developed 3D scanning system.

• 전기학회논문지
• /
• 제60권5호
• /
• pp.942-948
• /
• 2011

This paper deals with characteristic analysis of axial flux permanent magnet (AFPM) machines with axially magnetized PM rotor using quasi-3-D analysis modeling. On the basis of magnetic vector potential and a two-dimensional (2-D) polar-coordinate system, the magnetic field solutions due to various PM rotors are obtained. In particular, 3-D problem, that is, the reduction of magnetic fields near outer and inner radius of the PM is solved by introducing a special function for radial position. And then, the analytical solutions for back-emf and torque are also derived from magnetic field solutions. The predictions are shown in good agreement with those obtained from 3-D finite element analyses (FEA). Finally, it can be judged that analytical solutions for electromagnetic quantities presented in this paper are very useful for the AFPM machines in terms of following items : initial design, sensitivity analysis with design parameters, and estimation of control parameters.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.1748-1753
• /
• 2003

3D-PTV measurement was conducted on the wake of a sphere. The Reynolds number is 1130 with the diameter(d=30mm). The measurement system consisted of three CCD cameras, an image grabber, an Ar-Ion laser and a host computer. An eigenvalue analysis was introduced for the analysis on the wake. Statistical turbulent properties were quantitatively clarified using the time-consecutive instantaneous three-dimensional vectors obtained by the 3D-PTV system. The spatial distributions of the sphere wake showed strong relations with spiral motions of the vortcies shedded from the surface of the sphere.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2005년도 Proceedings of ISRS 2005
• /
• pp.721-724
• /
• 2005

In this study the spatial distribution characters of forest in forest damaged area were first considered by analyzing spatial data and monitoring forest landscape. Then suitable tree species on each site were selected through the weighted score analysis of GIS analysis methods. Finally, the best forest stand arrangement method could be presented on the 3D based simulation system for the advanced reforestation technology in Korea. For this purpose, the virtual reforestation system was implemented by using the concept of virtual GIS and CBD (Component Based Development) method. By use of this system the change offorest landscape of burnt forest area some years after reforestation practice could be detected and monitored by applying the site index and 3D modeling method.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2007년도 학술대회
• /
• pp.251-255
• /
• 2007

In this paper, propagation analysis method in using 3D Ray Tracing propagation model in wireless cell planning is proposed. Through 3D Ray Tracing model, we can predict the distribution of propagation loss of the received signal. For correct and a low complex analysis, Quad Tree and Pre-Ordering and Hash Function algorithms are included in 3D Ray Tracing algorithm. And 3D Ray Tracing model is embodied in CellTREK that is developed by KT and used to plan Wibro system analysis. In CellTREK, propagation analysis is performed and that result is represented in 3D viewer. In numerical results, it is showed that the proposed scheme outperforms Modified HATA model when comparing with measurement data.

• 한국컴퓨터산업학회논문지
• /
• 제2권7호
• /
• pp.895-904
• /
• 2001

본 연구에서는 능동 더블 밸런스 혼합기를 사용하기 때문에 이득을 높일 수 있지만 IIP3가 낮은 수신 시스템 I과 이득이 낮고 IIP3가 높은 수동 더블 밸런스 혼합기와 낮은 이득을 높이기 위한 중간 주파 증폭기로 구성된 수신 시스템II을 구성하여 수신 파라미터를 시험한 결과, 수신 시스템 I의 전체 잡음지수는 6.4382 dB이고 이득은 53.5dB, 제 3고조파 차단점은 -6.6352dB m이었다. 또한 수신 시스템II에서 전체 잡음지수는 9.70672dB이고 이득은 41dB, 제 3고조파 차단점은 3.66729dB m이었다.

• 수산해양기술연구
• /
• 제56권3호
• /
• pp.230-237
• /
• 2020

In order to design a diesel engine system and predict its performance, it is necessary to analyze the gas flow of the intake and exhaust system. A gas flow analysis in three-dimensional (3D) format needs a high-resolution workstation and enormous time for analysis. Therefore, the method of characteristics (MOC) was used for a gas flow analysis with a fast calculation time and a low-resolution workstation. An experiment was conducted on a single cylinder diesel engine to measure pressure in cylinder, intake pipe and exhaust pipe. The one-dimensional (1D) gas flow was analyzed under the same conditions as the experiment. The engine speed, valve timing and compression ratio were the same conditions and the intake pressure was inputted as the experimental results. Bent pipe such as an exhaust port that cannot be realized in 1D was omitted. As results of validation, the cylinder pressure showed accuracy, but the exhaust pipe pressure exhibited inaccuracy. This is considered as an error caused by the failure to implement a bent pipe such as an exhaust port. When analyzed in 3D, calculation time required 61 hours more based on a model of this study. In the future, we intend to implement a bent pipe that cannot be realized in 1D using 3D and prepare a method to supplement reliability by using 1D-3D coupling.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2004년도 춘계학술대회 논문집
• /
• pp.61-67
• /
• 2004

이 연구에서는, 인간(해기사)의 두 귀에 주목한 머리전달함수(HRTF)를 이용하여, 기적음과 관련된 해양사고를 분석-평가하기 위한 시뮬레이션 시스템(3D-LSS)을 개발하였다. 해양사고당시 상황을 분석해서 가청화 모델을 구축하고, 3차원음 생성방법과 평가방법을 제시하였다. 개발한 시스템은 CUI 방식의 그래픽과 3차원 음향으로 해양사고 당시의 상황을 묘사하고, 시뮬레이션할 수 있도록 구성하였다. 3D-LSS을 이용하여, 해양사고 중에서 기적음 청취여부를 판단하지 못했던 6가지 사건을 대상으로 실험하였다. 5명의 평가자에 의한 심리음향평가결과, 6가지 사건을 시각적 청각적으로 명확하게 평가할 수 있었기 때문에 3D-LSS의 해양사고 심판보조 장치로서의 활용가능성을 확인할 수 있었다.