• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.2
• /
• pp.237-244
• /
• 2022

We measured the clutter loss (CL) and building entry loss (BEL) of signals in a low-rise high-density suburban environment. Three propagation models for BEL, CL, and a combination of BEL and CL were measured in the selected environment. We then derived the figures when the BEL was combined with the CL. At the two frequencies, the measured value of combination of BEL and CL is 27.55 dB and 26.12dB, respectively, and the differences between the measured value and the sum were -4.19 dB and 5.82 dB. Considering that the measurement was performed inside a building, such a difference seems to be small. Therefore, when BEL and CL were measured separately and summed, and then combined and summed, differences of -4.19 dB and 5.82 dB were apparent. This this result can be referenced when similar case of a propagation model was analyzed.

• 한국정보통신설비학회:학술대회논문집
• /
• 2004.08a
• /
• pp.226-229
• /
• 2004

본 논문은 초고주파 영역에서 개방 단말 동축선을 대신해서 복소 유전율을 측정할 수 있는 MEMS 프로브와 그 응용예로 MEMS 프로브 어레이를 제안한다. MEMS 프로브는 기존의 동축선 프로브와 달리 커넥터와의 연결이 간단하여 일회용으로 프로브를 사용할 수 있다는 점에서 의료용으로 사용할 수 있는 가능성이 있다. 샘플의 유전율 분포를 구하기 위해서 기존의 센서는 반복 접촉을 요구하고 이로 인한 번거로움과 측정 오차를 줄일 목적으로 MEMS 프로브 어레이를 개발 하였다. MEMS 프로브 어레이는 RF 스위치를 사용하여 다수의 측정 포인트를 한번의 센서 접촉으로 측정할 수 있는 새로운 개념의 프로브이다. 1GHz부터 40GHz까지의 광대역에서 0.9% 식염수의 유전율을 측정하여 MEMS 프로브의 성능을 검증하였다.

• Journal of Biosystems Engineering
• /
• v.24 no.2
• /
• pp.159-166
• /
• 1999

A system to extract continuously the real 3-D geometric fearture information from 2-D image of an object, which is fed randomly via conveyor has been developed. Two sets of structured laser lightings were utilized. And the laser structured light projection image was acquired using the camera from the signal of the photo-sensor mounted on the conveyor. Camera coordinate calibration matrix was obtained, which transforms 2-D image coordinate information into 3-D world space coordinate using known 6 points. The maximum error after calibration showed 1.5 mm within the height range of 103mm. The correlation equation between the shift amount of the laser light and the height was generated. Height information estimated after correlation showed the maximum error of 0.4mm within the height range of 103mm. An interactive 3-D geometric feature extracting software was developed using Microsoft Visual C++ 4.0 under Windows system environment. Extracted 3-D geometric feature information was reconstructed into 3-D surface using MATLAB.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.10
• /
• pp.928-936
• /
• 2013

3D crosstalk is one of the disturbing things to recognize 3D images. This is caused by the phenomenon that input image for left eye is transferred at the right eye and right eye is transferred at the left eye because of the imperfect isolation by the device characteristics. In this paper, we review the 3D PDP (Plasma Display Panel) operation using active shutter glasses and crosstalk measurement method and investigate the major cause of 3D crosstalk and extend conventional 3D crosstalk using full white and full black image input to Gray-to-Gray (GtoG) 3D crosstalk. We suggest a specific method to reduce Gray-to-Gray 3D crosstalk by using Look up Table (LUT) and sub-field mapping in PDP. And then, we verify the method by measuring GtoG 3D crosstalk rate through specific test images and numerical results.

• Journal of Navigation and Port Research
• /
• v.27 no.4
• /
• pp.437-441
• /
• 2003

In this paper, the 30 W power amplifier for an IMT-2000 repeater was developed a gain flatness and the third IMD (Intermodulation distortion) by microwave absorber. The absorption ability of the absorber is shown up to -10 dB and -4 dB at 3.6 GHz, 2.3 GHz band, respectively. The power amplifier without absorber has the gain over 57 dB, the gain flatness of $\pm$0.33 dB and the third IMD of 27 dBc at 33.3 W output. Otherwise, the power amplifier with absorber has the gain over 58 dB, the gain flatness of less than $\pm$0.9, the third IMD over 29 dBc at the same output power. As a result, the characteristic of the different type shows improvement of 1 dB in gain, 0.3 dB in gain flatness and 1.77 dBc in IMD.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.4
• /
• pp.35-39
• /
• 2019

The shielding effectiveness (SE) of the EMI spray coating film was measured in a three-dimensional structure. The shielding effectiveness was measured by AST D4935 using coaxial type TEM cell. A standard sample of the cylindrical slab is fabricated to measure the shielding effectiveness using the ASTM D4935. At this time, spray coating was performed by bonding a three-dimensional structure with NAND flash memory to a standard sample. In the case of spray coating, it was uniformly coated not only on the horizontal plane but also on the vertical plane of the three-dimensional structure. As a result of measurement, shielding effectiveness of maximum 59 dB was measured in a three-dimensional structure similar to the case without three-dimensional structure. As a result, it was confirmed that the spray coating can be uniformed even in the three-dimensional structure.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.2 s.332
• /
• pp.9-16
• /
• 2005

The performance of satellite range measurement using tone method was analyzed in the presence of satellite link AWGN. The phase errors in range measurement are generated by AWGN of satellite up- and down-link and the degradations of satellite range measurement are dependent on the transmission mode and loop bandwidth of satellite measurement system. The analyzed effects for satellite measurement in presence of satellite link noise were also analyzed with the measured satellite range data via satellite range measurement system operating in satellite link AWGN. In RAU mode, the satellite range differences of 14.4 to 40.6 m were occurred according to the loop bandwidth of satellite range measurement system and the degradation of 0.3 dB compared with theoretical value was generated under condition of the signal-to-noise ratio of 43 dB. In RAU and TM mode, the performances of range measurement were approximately agreed to the that of RAU mode. In order to get the equal performance characteristics with RAU mode, the signal-to-noise ratio of satellite link for RAU and TM mode should be increased by signal power of 2.3 dB, which is a power loss due to transmission of telemetry signal.

• Journal of Navigation and Port Research
• /
• v.38 no.3
• /
• pp.227-232
• /
• 2014

There are three essential components of eLoran: dLoran, data map of ASF, and the Loran data channel. Particularly, dLoran improves navigation accuracy, which is the core technology of eLoran systems. The requirement of HEA's absolute accuracy, less than 20 meters, can be satisfied via dLoran measurements and their corrections. In this study, dLoran measurements using the Pohang Loran-C (9930M) station signal were conducted at Yeongil Bay. We established a dLoran reference station at Homigot Management Office for navigation aids within the Bay. We estimated the effectiveness of the dLoran between the reference site (Homigot Management Office) and a test site (Heunghwan beach) by measuring TOAs. We verified that the TOA data measured at these two regions were highly correlated. The temporal differences in the data between the dLoran reference station and test site were about 10~30 ns per day, which is equivalent to a ranging error of 3~9 m. This result shows that eLoran can meet the requirement of 8~20 meters position accuracy for maritime HEA by correcting the ASF at the user's receiver.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2010.04a
• /
• pp.129-131
• /
• 2010

This study is to measure 3d deformation of railroad-bridge of steel structure using the non-metric high-resolution digital camera. Measuring the deformation is to be utilized relative orientation using the coplanarity for reduction of the field survey and efficiency of the work. The results are compared with deformation by exterior orientation parameters, which are computed from 3d measurement of control points by the Total-station. Then accuracy of the utilized method will be verified.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.1
• /
• pp.684-692
• /
• 2016

In the manufacturing process of the LQFP/TQFP (Low-profile Quad Flat Package/Thin Quad Flat Package), the requirement of a 3 dimensional inspection is increasing rapidly and a 3D inspection of the shape of a chip has become an important report of quality control. This study developed a 3 dimensional measurement system based on PMP (Phase Measuring Profilometry) for an inspection of the LQFP/TQFP chip and image processing algorithms. The defects of the LQFP/TQFP chip were classified according to the dimensions. The 2 dimensional optical system was designed by the dorm illumination to achieve constant light distribution, In the 3 dimensional optical system, PZT was used for moving 90 degree in phase. The problem of 2 ambiguity was solved from the measured moir? pattern using the ambiguity elimination algorithm that finds the point of ambiguity and refines the phase value. The proposed 3D measurement system was evaluated experimentally.