• International Journal of Highway Engineering
• /
• v.8 no.2 s.28
• /
• pp.63-74
• /
• 2006

During the construction of circular underground pipe, the non-proper compaction along the pipe and the decrease of compaction efficiency have been the main problems to induce the failure of underground pipe or facility. The use of CLSM (controlled low strength materials) should be one of the possible applications to overcome those problems. In this research, the full-scaled field test and the numeric analysis using PENTAGON-3D FEM program were carried out for three different cases on the change of backfill materials, including the common sand, the soil from construction site, and the CLSM. From the full-scaled test in field, the use of in-situ CLSM as backfill materials reduced the vertical and lateral deformation of the pipe, as well as the deformation of the ground surface. The main reason for reducing the deformation would be the characteristics of the CLSM, especially self-leveling and self-hardening properties. The measured earth pressure at the surround of the corrugated pipe using the CLSM backfills was the smaller than the other cases, and the absolute value was almost zero. Judging from the full-scaled field test and FEM analysis, the use of CLSM as backfill materials should be one of the best choices reducing the failure of the underground pipes.

• Korean Journal of Agricultural Science
• /
• v.23 no.2
• /
• pp.188-205
• /
• 1996

This study was conducted to examine the effects of dietary energy and protein sources on the rumen microbial population of sheep. The results obtained were summarized as the follows; 1. Ruminal pH was highest in sheep fed the diet rapidly degraded in the rumen(F-F) as a energy (barley plus beet pulp) and protein source (rapeseed meal), and lowest in the diet (F-S) of rapidly degradable energy source plus slowly degradable protein source (corn gluten meal + cotton seed meal) without affecting by postfeeding time. 2. Ruminal ammonia concentration was higher in corn (slowly degradable) for energy source and rapeseed meal (rapidly degradable) for protein source (S-F) than others, and abruptly increased at 1 hr after feeding regardless of treatments. 3. Concentration of ruminal total volatile fatty acid, acetate and propionate were highest in F-S and peaked at 1 hr after feeding firstly and formed second peak at 9hrs, respectively. 4. Digestibilities of the proximates and ADF were not affected by treatment but NDF was highest in F- F. 5. Nitrogen retention was highest in S-F and lowest in F-F and F-S. 6. Digestibility and metabolizability of energy, contents of OCP, TDN, DE and ME were not affected by treatment.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.9
• /
• pp.83-93
• /
• 2016

This study was conducted to develop a 26-week obesity management program and examine the effects of this program on obesity index (body mass index, fat mass percentage, and triglyceride) and psychological variables, self-esteem, dietary self-efficacy, physical activity self-efficacy, and body image among 46 4th-6th obese elementary school children with a BMI above $20kg/m^2$ using a nonequivalent control group quasi-experimental design (experimental group=23, control group=23). This program included a 12-week intensive course (12 times for group education on obesity, exercise, and nutrition, 36 times for practicing diet and physical exercise, and 5 times for psychological counseling) and a 14-week follow-up course (3 times for group education, 3 times for checking diet and physical exercise, and 1 time for psychological counseling. The collected data were analyzed by the Kolmogorov-Smirnov test, chi-squared test, Fisher's exact probability, t-test, and ANCOVA. There were above normal values in body mass index ($20kg/m^2$), fat mass percentage (15-20%), and triglyceride tolerance ($90mg/d{\ell}$) in experimental group and control group. The body mass index (F=94.869, p<.001), fat mass percentage (F=37.361, p<.001), and triglyceride tolerance (F=7.907, p= .007) were significantly lower, while self-esteem (F=19.661, p<.001), dietary self-efficacy (F=16.942, p<.001), physical activity self-efficacy (F=9.363, p= .004), and body image (F=9.782, p= .003) were significantly higher in the experimental group than the control group after 26 weeks. This study provides evidence that the 26-weeks obesity management program is an effective nursing intervention for managing obesity and psychological variables of obese elementary school children.

• Journal of Korea Water Resources Association
• /
• v.45 no.3
• /
• pp.317-329
• /
• 2012

It is increasing to make an efforts on preventing natural river environment and preserving natural river ecosystem as development is unavoidable. In the case of inconsistent river flow caused by reservoir development, fishway is an alternative to secure fish diversity and preserve existing river ecosystem but existing fishway was established without full study for their functions. In this study, hydraulic characteristics of natural fishway established on Beakje weir's right side were analyzed. The results show that the fishway has reasonable depth and velocity condition which inhabit condition is enough for a dominant species. For assessing the optimal design of fishway, the Weighted Usable Area (WUA) was calculated by using two dimensional numerical model under the ordinary flow condition. The comparison results for various pool widths in the fishway show that the designed width has maximum WUA for adult Zacco platypus but WUA is maximized with 1m wider pool width than designed width for spawning.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.4
• /
• pp.457-463
• /
• 2012

Current refrigerators are designed to have thin doors and walls to facilitate user convenience and increase inner storage space. However, the thin doors and walls gives rise to the problem of dew generation on the outer surface of a refrigerator due to a large critical temperature difference between the outer wall and the room air; So far, an electric heater is commonly used for making the dew to evaporate; in this case, the heater inevitably requires additional electrical power. We propose a new approach to reduce the dew generation in a refrigerator by redesigning the gasket and varying the thickness of the inner case of the refrigerator. The results of simulations performed in this study indicate that the surface temperature in the region where dew was generated was increased by approximately $0.39{\sim}3.07^{\circ}C$ without the use of a heater.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.6
• /
• pp.721-728
• /
• 2016

97% of water on earth exists in the form of seawater. Therefore, the use of marine resources is one of the most important research issues at present. The use of seawater is expanding in various fields (seawater desalination, cooling water for nuclear power plants, deep seawater utilization, etc.). Seawater intake systems utilizing sand filters in order to take in clean seawater are being actively employed. For the intake pipe used in this system, assuring equal intake flows through the respective holes is very important to improve the efficiency of the intake and filtering process. In this study, we analyzed the efficiency of the dual structure perforated pipe used in the seawater intake system using 3D numerical simulations and the inflow rate according to the gap of the up holes. In the case of decreasing gaps in the up holes toward the pipe end, the variation of the total inflow rate was small in comparison with the other cases. However, the standard deviation of the inflow rate through the up holes was the lowest in this case. Also, stable flow occurred, which can improve the efficiency of the intake process. In the future, a sensitivity analysis of the various conditions should be performed based on the results of this study, in order to determine the factors influencing the efficiency, which can then be utilized to derive optimal designs suitable for specific environments.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2017.04a
• /
• pp.18-18
• /
• 2017

ISO11783은 농업 산업분야 통신 프로토콜의 국제 표준으로, 농용트랙터 및 작업기 ECU 간의 통신 프로토콜을 표준화한다. 이 표준은 서로 다른 제조사의 제품 간에 호환성을 갖게 하며, 정밀 농업에 대한 핵심 기반을 제공한다. 현재 해외에서는 이미 ISO11783 기반의 AFS(Advanced Farming System)를 통한 정밀농업이 상용화되어 농가에 보급되고 있다. 이에 비해, 국내에서 이러한 표준을 따르는 농기계들은 미비한 실정이며, 향후 농업의 정밀 농업화를 통한 고부가가치 창출 및 선진국의 무역 장벽에 대비와 해외 수출 판로 개척을 위해 ISO11783 표준에 대한 R&D가 필요로 한다. 이에 IsoAgLib를 분석하고 임베디드 보드에 Porting하여 ISO11783 기반 작업기 ECU를 구현하였고, 이를 기반으로 ISO11783 기반 작업기 ECU의 구현 방법을 발표한다. IsoAgLib의 시스템 아키텍처는 계층화 되어 있어, 타겟에 의존적인 계층만 수정하여, IAR 환경에서 Cortex M3 보드에 포팅을 완료하였다. 작업기 ECU들은 자신만의 인터페이스 화면을 갖으며, 이를 Object pool이라 한다. 이것을 Virtual Terminal(VT)에 업로드 하여, VT가 해당 작업기 ECU의 사용자 인터페이스 기능을 제공하도록 한다. 이에 작업기 ECU 구현 1 단계로, 'VT-Designer'를 통하여 Object pool를 설계한다. 2 단계, 'vt2iso'를 통해서 Object pool을 IsoAgLib 상에서 사용할 수 있도록 변환한다. 3 단계, 포팅된 IsoAgLib project에 변환된 파일을 포함 시킨다. 4 단계, 작업기 ECU의 주기적인 작업 및 각 메시지 수신시 수행할 작업을 코딩한다. 5 단계, 빌드 및 타겟 보드에 업로딩 한 후, New Holland 사의 $Intelliview^{TM}$ iv display (VT)과 연결하여 동작을 확인한다. 확인 결과로 VT에 디자인한 Object pool이 표시 되며 soft key 입력 시 작업기 ECU에서 LED가 변한다. 결론적으로, 연구 결과를 바탕으로 ISO11783 기반의 작업기 ECU의 디자인 및 구현이 가능하며, 이를 통해 향후 국내의 ISO11783 기반의 작업기 ECU의 개발에 도움을 줄 수 있다.

• Child Health Nursing Research
• /
• v.20 no.3
• /
• pp.185-195
• /
• 2014

Purpose: The purpose of this study was to identify whether hearing a recording of mother's voice affected physiological reactions, behavioral state related to sleep and weight of very low birth weight (VLBW) infants. Methods: This was a nonequivalent control group pre-post test quasiexperimental design. The participants were 11 VLBW infants in the experimental group and 11 in the control group. In the experimental group, a recording of mother's voice was played to her infant by voice recorder four times each day for five minutes over 10 consecutive days in the incubator. Results: For physiological response (heart rate, respiration rate, oxygen saturation), there were statistically significant differences between the experimental and control groups. Behavioral state during sleep was more very quiet and quiet in the experimental group. In the daily weight change, there was no significant difference between the experimental and control groups. Conclusion: The findings suggest that, for VLBW infants, the intervention of hearing a recording of mother's voice had some significance as a nursing intervention having a positive impact. Such interventions can help pediatric nurses to stabilize the physiological response and maintenance more very quiet sleep state and improve VLBW infants' growth.

• Journal of Korea Water Resources Association
• /
• v.45 no.5
• /
• pp.495-503
• /
• 2012

It is necessary to perform the precise analysis of unsteady flow for effective design of the side-weir detention basin installed in the river. Generally, the HEC-RAS program, which is a 1D unsteady numerical model, is mostly used to simulate the unsteady flow for rivers. However, it is difficult to have confidence of unsteady flow results simulated by HEC-RAS due to the lack of experimental data and field monitoring data for the channel with a side-weir detention basin. Therefore, the purpose of this study is to validate or verify the simulation results calculated by HEC-RAS through the experiments for the open channel with a side-weir detention basin using specially-designed unsteady discharge-supply system. The experimental cases included unsteady flows in the straight channel with and without a side-weir detention basin. Especially, for the case with a detention basin, the experiment was performed to consider only the free flow condition over the side-weir. The study results showed that values of water level and discharge obtained from HEC-RAS coincided reasonably with experimental results with the maximum error of 3% for water level and 1% for discharge in the case of the flow without the side-weir detention basin and 4% for water level and 2% for discharge with the side-weir detention basin.

• Tunnel and Underground Space
• /
• v.20 no.4
• /
• pp.267-276
• /
• 2010

In modern rock engineering practice, fully grouted rock bolting is actively employed as a major supporting system, so that understanding the behavior of fully grouted rock bolts is essential for the precise design of rock bolting. Despite its importance, the supporting mechanism of rock bolts has not been fully understood yet. Since most of existing analytical models for rock bolts were developed by drastically simplifying their boundary conditions, they are not suitable for the bolts of in-situ condition. In this study, 3-D elastic FE analysis of fully grouted rock bolts has been conducted to provide insight into the supporting mechanism of the bolt. The distribution of shear and axial stresses along the bolt are investigated with the consideration of different boundary conditions including three different displacement boundary conditions at the bolt head, the presence of intersecting rock joints, and the variation of elastic modulus of adjacent rock. The numerical result reveals that installation of the faceplate at the bolt head plays an important role in mobilizing the supporting action and enhancing the supporting capabilities of the fully grouted rock bolts.