• Geophysics and Geophysical Exploration
• /
• v.13 no.4
• /
• pp.397-406
• /
• 2010

Resistivity method is a practical and effective geophysical technique to detect leakage zones in embankment dams. Generally, resistivity survey conducted along the crest assumes that the embankment dam has a 2D structure. However, the 3D topography of the embankment distorts significantly resistivity data measured on anywhere of the dam. This study evaluates the influence from 3D effects created by specific dam geometry and effects of water level fluctuations through the 3D finite element modeling technique. Also, a comparison between different locations of survey line are carried out, and topographic correction technique is developed for the resistivity data obtained along the embankment dam. Furthermore, using synthetic resistivity data for an embankment dam model with leakage zone, detectability of leakage zones is estimated through 2.5D inversion.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.541-545
• /
• 2012

이 연구에서는 SEEP2D 모형을 사용하여 하부에 투수지반을 갖는 제방 내부의 침투흐름에 대한 수치모의를 수행하였다. 제방의 재료는 4대강사업 낙동강 제2하구둑 건설 현장에서 채취한 시료를 사용하였으며, 입도분석과 들밀도시험을 통해 구한 제방의 건조단위중량과 다짐도 및 제방의 투수계수는 각각 $1.372g/cm^3$, 93%, 1.35 m/day이다. 투수지반층과 1:3 비탈경사를 가지는 제방모형을 제작하여 연직 이차원 정상류 침투해석 모형을 해석하는 SEEP2D 프로그램을 사용하여 나온 결과 값을 수리모형 실험 결과 값과 비교하였다. 모의조건은 0.45 m, 0.50 m, 0.55 m, 0.60 m의 4가지 수위(각각 Case1~4)조건에 대하여 수리모형실험과 동일한 조건을 수치모형에 적용하였다. 수치모형의 결과는 실험결과와 비교적 일치하였지만 제방의 비탈사면이 시작하는 부분에서는 수치모형의 결과 값보다 실험결과 값이 작은 것으로 확인되었다. 각각의 조건별로 수치해와 실험 결과값을 비교해본 결과 대체적으로 비슷한 양상을 보였지만 제방의 비탈사면이 시작하는 지점부터 수치모형의 결과 값보다 실험결과 값이 작은 것으로 확인되었다. Case3의 경우 4.35 m 지점부터 6.00 m 지점까지 유출이 발생하였으며 수치모형의 결과값과 실험결과 값의 차이가 가장 작게 나타났다. 사면유출 길이는 Case4에서 가장 길게 나타났으며 최대 4.10 cm로 발생하였다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2023.05a
• /
• pp.722-723
• /
• 2023

가속화되는 인구 감소와 COVID-19로 인하여 지방 도시 쇠퇴 현상이 심화되고 있다. 한편, 지역 활성화의 핵심 전략이자 수단이 되는 관광 산업은 트렌드에 맞는 새로운 컨텐츠가 부족하여 어려움을 겪고 있다[1]. 본 논문에서는 이러한 문제를 해결해보고자 가상현실(VR)과 증강현실(AR) 기술을 적용한 새로운 관광 컨텐츠를 제안한다. 실제 도시를 3D 모델링 한 배경과 3D 페인팅 기능을 통해 작품 만들기 서비스를 구현하였고, GPS 기능과 AR 카메라를 통해 작품 관람하기 서비스를 구현하였다. 이 프로그램은 메타버스 기술을 적용한 관광 컨텐츠의 사례로써 향후 지방 도시 활성화에 기여할 것으로 기대한다.

• Journal of radiological science and technology
• /
• v.38 no.4
• /
• pp.389-394
• /
• 2015

There is a progressive development in the medical imaging technology, especially of descriptive capability for anatomical structure of human body thanks to advancement of information technology and medical devices. But however maintenance of correct posture is essential for the medical imaging checkup on the shoulder joint requiring rotation of the upper limb due to the complexity of human body. In the cases of MRI examination, long duration and fixed posture are critical, as failure to comply with them leads to minimal possibility of reproducibility only with the efforts of the examiner and will of the patient. Thus, this study aimed to develop an auxiliary device that enables rotation of the upper limb as well as fixing it at quantitative angles for medical imaging examination capable of providing diagnostic values. An auxiliary device has been developed based on the results of precedent studies, by designing a 3D model with the CATIA software, an engineering application, and producing it with the 3D printer. The printer is Objet350 Connex from Stratasys, and acrylonitrile- butadiene-styrene(ABS) is used as the material of the device. Dimensions are $120{\times}150{\times}190mm$, with the inner diameter of the handle being 125.9 mm. The auxiliary device has 4 components including the body (outside), handle (inside), fixture terminal and the connection part. The body and handle have the gap of 2.1 mm for smooth rotation, while the 360 degree of scales have been etched on the handle so that the angle required for observation may be recorded per patient for traceability and dual examination.

• Journal of The Korean Association of Information Education
• /
• v.23 no.5
• /
• pp.469-480
• /
• 2019

One of the goals of the new 2015 revised curriculum is to cultivate the creativity of students who will live in the era of the Fourth Industrial Revolution to create new things through diverse ideas and challenges based on basic learning skills. Accordingly, in order to solve the given problems rationally, the convergence problem solving ability that can process and utilize various areas of knowledge and information is becoming important. Therefore, in this study, we designed the integrative education using a 3D printer based on Tinkercad modeling and applied it to the class to investigate the effect on the improvement of computing thinking ability of elementary school students. To verify the contents of the study, two classes of 25 sixth-grade elementary school students were divided into an experimental group and a controlled group. For the experimental group, 12 classes of convergence education programs using a 3D printer were applied for about three months, and the same amount of general curriculum was conducted for the control group. After that, the t-tests were carried out using the pre-post test to measure the effectiveness of the computational thinking ability. After the application of the program, the experimental group showed statistically significant improvement in computational thinking ability, but the controlled group showed no statistically significant difference. The results show that convergence education using the Tinkercad modeling-based 3D printer has a positive effect on the improvement of computing thinking ability of elementary school students.

• Journal of the Korean GEO-environmental Society
• /
• v.15 no.3
• /
• pp.57-63
• /
• 2014

This study has been conducted to building a library intended for structures considered in the design of reclamation for design automation and developing browser for integrated management system. The library has been developed using a parametric modeling method capable of changing section shape, also classifying standard crossing and family library, has been developed according to the working environment. Classified library by the characteristics manages objects and working modeling on based BIM has been developed browser using the C# program for objects to use conveniently. By interworking between developed Browser and 3D Autocad based BIM, it is possible to use easily at design drafting, calculating quantities, developing a new library, and managing a library. The browser using effectively exclusive library to reclamation is developed in this study.

• Journal of the Korea Society of Computer and Information
• /
• v.27 no.1
• /
• pp.23-32
• /
• 2022

Image production using three-dimensional (3D) programs undergoes a process called rendering to visualize 3D data. Because this process is time-consuming and costly, the reduction of rendering cost has emerged as an important problem that requires resolution. This work aims to overcome the limitations of the current 3D image production pipeline and propose a method for reducing the production time by adopting a game engine for real-time rendering. In the experiment conducted in this study, rendering using Maya (a 3D production program) and Unity were compared and analyzed. The analysis results indicate that Unity enables rendering in real time; consequently, the rendering cost is reduced. Moreover, the quality of the rendered image is similar to that produced by Maya. The proposed technique involves reducing the render time and providing guidance through access to a real-time rendering engine.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.42 no.3 s.145
• /
• pp.36-39
• /
• 2005

현재 당사가 보유하고 있는 조선 전용 CAD시스템은 모델링을 통해 도면제작 기능까지 일관하게 제공하고 있지만 시뮬레이션이나 3D 가시화를 위한 시스템이 부재한 실정이다. 이에 상용 기술인 VRML을 이용하여 선박 블록 및 ASSY별 형상을 가시화 하고, 그 형상정보에 생산에 필요한 정보를 포함하여 쉽게 Navigation 및 Walkthrough가 가능하다. 이런 가시화 기술을 기간 ERP 시스템과 접목하여 용접로봇 시스템을 개발하였고, 공정 스케줄에 따라 용접로봇 시스템에 필요한 형상정보를 생성해 용접 NC Data를 생성한다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.05a
• /
• pp.591-594
• /
• 2002

In this study, we develop automatic design program, which create 3D model of spur gear and helical gear used VisualLISP and create helical gear in the CATIA using 2D profile of gear. This model become the standard models which give not only in itself mold information but also compare processed product with measuring date. Spur gear require mathematical examination of involute curve and trocoidal fillet curve. Automatic design program, which have a mathematical development create the profile of spur gear.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2005.11a
• /
• pp.47-55
• /
• 2005

A design of a dismantling mock-up system have been established based on the result that analyzed a characteristic of modules which need to design a virtual dismantling facility. A unit program composed of a various module such as a decommissioning database system. 3D dosimetric mapping that represents a distribution of a radionuclide contamination, a evaluation module for a dismantling schedule and cost A research of software architecture was carried out in order to Integrate these components that have been independently operated. The result was established an architecture that consis of a visualization module which could be visualized D&D activities and a simulation module which tan he evaluated a dismantling schedule and decommissioning cost.