• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.467-468
• /
• 2006

In this work, we present the comparison between $d_{31}\;and\;d_{33}$ mode characterization using the PZT micro-actuator for large displacement. The PZT micro-actuator consisted of Si, PZT, and Pt layer on SOI wafer. The electrode shapes were laminated and interdigitated for $d_{31}\;and\;d_{33}$ mode, respectively. In order to characterize the actuation mode, we measured the displacement using laser interferometer. The maximum displacement of d31 mode was $12.2{\mu}m$ at 10V, the actuation characterization of d31 was better than that of d33 mode. We estimated that displacement of d33 mode would be larger than that of d31 above 30V.

• The Journal of the Acoustical Society of Korea
• /
• v.38 no.2
• /
• pp.184-192
• /
• 2019

Compared to 31-mode rings, 33-mode rings are highly utilized as wide bandwidth underwater acoustic transducers because the electro-mechanical coupling and piezoelectric constant d are high. On the other hand, the 31-mode ring is an axial symmetry structure, so it is possible to model it as a simple two-dimensional asymmetrical model for numerical analysis, but the 33-mode ring requires a three-dimensional numerical analysis. That is, a lot of computing resources and computation time are required. In this study, the effective material properties of an equivalent 31-mode ring were derived to simulate the electro-mechano-acoustical responses of the 33-mode ring transducer. Using the effective material properties derived from this study, a numerical analysis of rings in vacuum, air backed rings in water, and FFR (Free Flooded Ring) transducers were performed to compare the responses of 33-mode rings.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.5
• /
• pp.491-503
• /
• 2014

In this paper, a $TM_{31}$ higher order mode half circular-ring microstrip antenna with monopole-like radiation characteristic for on-body communication is proposed. By using shorting vias, $TM_{31}$ resonance mode was excited, while achieving compact low-profile antenna with monopole-like radiation characteristics. To overcome the narrow bandwidth of a patch antenna, a C-shape half ring patch with shorting vias having $TM_{31}$ mode is closely located around a half circular patch. For size reduction, half mode is adopted. The proposed antenna has the overall dimensions of $0.25{\lambda}_0{\times}0.46{\lambda}_0{\times}0.025{\lambda}_0$ at the industrial, scientific, and medical(ISM) 2.45 GHz band(2.4~2.485 GHz) and the 10-dB return loss is 4.24 % ranging from 2.38 to 2.49 GHz. To verify body effect, two-thirds muscle equivalent semi solid phantom was fabricated and used to measure the antenna performance. A communication link is analysed to investigate the effect of human-body movements and antenna locations.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.3
• /
• pp.523-528
• /
• 2004

The bands 27.5 ∼ 28.35GHz and 31.0 ∼ 31.3GHz were allocated to the High Altitude Platform Station in WRC-2000. However, since these bands were already allocated to the existing fixed-satellite service, the analysis on the interference effects between the existing FSS/GSO system and FS/HAPS system should be needed. To do study on the interference effects between above two systems, we can consider two frequency operational conditions, one is the Reverse mode and the other Forward mode. In this paper, we considered the Forward mode as the frequency operational condition and analyzed the interference effect from a number of GSO satellites to HAPS ground station due to the I/N values, the latitude of HAPS and the satellite separation. In future, these results will be vital data to share between HAPS and GSO systems.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.5B
• /
• pp.476-481
• /
• 2004

Since the bands 27.5 ∼ 28,350㎓ and 31.0 ~ 31.30Hz for existing fixed-satellite service were allocated to tile HAPS system in WRC-2000, the analysis on the interference effects between the existing FSS/GSO system and FS/HAPS system should be needed. To do study on the interference effects between above two systems, we can consider two frequency operational conditions, one is the Reverse mode, the other is Forward mode. In this paper, we analyzed the interference effects from airship of HAPS systems to satellite of the GSO system in the case of Reverse condition mode due to the C/I criterion, the latitude of HAPS and transmitting power of HAPS airship. In future, these results will be vital data to share between HAPS and GSO systems.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.10a
• /
• pp.610-614
• /
• 2003

The bands 27.5 - 28.35GHz and 31.0 - 31.3GHz were allocated to the High Altitude Platform Station in WRC-2000. However, since these bands were already allocated to the existing fired-satellite service, the analysis on the interference effects between the existing FSS/GSO system and FS/HAPS system should be needed. To do study on the interference effects between above two systems, we can consider two frequency operational renditions, one is the Reverse mode and the other Forward mode. In this paper, we considered the Forward mode as the frequency operational condition and analyzed the interference effect from a number of GSO satellites to HAPS ground station due to the I/N values, the latitude of HAPS and the satellite separation. In future, these results will be vital data to share between HAPS and GSO systems.

• Journal of Ocean Engineering and Technology
• /
• v.31 no.5
• /
• pp.364-370
• /
• 2017

A numerical model based on the mode superposition method is used to study the vortex-induced vibration response characteristics of a deep-sea riser such as steel catenary riser (SCR). A steel catenary riser can be modeled using a flexible cable with simple supports at both ends. The natural frequency, mode shape and mode curvature of the riser are calculated and the vortex-induced vibration response of the riser is obtained using the equilibrium of the input and output power. The mode superposition method is applied to the vibrational stresses for each mode to calculate the overall riser fatigue life.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.31 no.4
• /
• pp.432-440
• /
• 2007

In this study, we have investigated the closure behavior of fatigue cracks in SAPH440 steel plates under a mixed-mode I+II loading. A crack image capturing system as a direct measuring method was used to measure the closure levels at a crack tip. The crack closure levels in the fluctuation and stable sections were increased with the increase of the mode mixture ratio. The mode mixture ratio independent fatigue crack propagation rates equation was calculated by considering mixed-mode crack closure levels. The equation was examined according to the application method of crack opening ratio. The fracture surface analysis by C-scan method was also performed in order to investigate the closure mechanism and propagation mode of crack under the mixed-mode I+II loading. The crack closure under the mixed mode I+II is confirmed as a surface roughness closure by the quantitative analysis of fracture surface using the proposed surface roughness parameter.

• Transactions of Materials Processing
• /
• v.17 no.7
• /
• pp.473-480
• /
• 2008

Sheet metal forming of Mg alloy is usually performed at elevated temperature because of the low formability at room temperature. Therefore, strain rates affected with the forming temperature and speed must be considered as important factor about formability. Effects of process parameters such as various temperatures and forming speeds were investigated in circular cup deep drawing. From the experimental results, it is known that LDR (Limit Drawing Ratio) increase as the strain rate increase. On the contrary, the FLD (Forming Limit Diagram) shows lower value as faster strain rate. Therefore, anisotropy values are investigated according to the temperature and strain rates at each forming temperature. R-values also represent higher value as faster strain rate. It is known that the formability can be different with the deformation mode on warm forming of AZ31 alloy sheet.

• Journal of the Korean Society for Precision Engineering
• /
• v.31 no.9
• /
• pp.805-811
• /
• 2014

In this investigation, we constructed and demonstrated a simple Yb-doped fiber laser, of which longitudinal modes are mode-locked without any additional devices to compensate the dispersion caused by optical components. Non-linear polarization rotation (NPR) was adopted for the mode-locking mechanism and a polarization controller (PC) was used for a kind of spectral filters to restrict the bandwidth for mode-locking. As the result, the laser was successfully operated as mode-locked with the repetition rate of 42.2 MHz and the spectrum was broadened up to approximately 16 nm at 1033 nm center wavelength when the laser was mode-locked. In this paper, the operation of the developed Yb-doped mode-locked laser is explained with the concept of Lyot filter realized by a PC, which enables mode-locking under normal dispersion. In the industrial applications, this laser can be used as a seed laser of the high power lasers for optical manufacturing.