• Proceedings of the KWS Conference
• /
• 2009.11a
• /
• pp.59-59
• /
• 2009

The influences of B and Si in the filler metals on microstructure and isothermal solidification during transient liquid-phase (TLP) bonding of a nitrogen-containing duplex stainless steel with MBF-30 (Ni-4.5wt.%Si-3.2wt.%B) and MBF-35 (Ni-7.3wt.%Si-2.2wt.%B), were studied at the temperature range of $1030-1090^{\circ}C$ with various times from 60 s to 3600 s under a vacuum of approximately $10^{-5}$ Torr. In case of the former, BN, $Ni_3B$ and $Ni_3Si$ precipitates were formed in the bonding region. BN and $Ni_3Si$ secondary phases were present in the joint for the latter case. The formation of $Ni_3B$ within the joint centerline is dependent on B content. The morphology of $Ni_3Si$ is dominated by Si concentration. A difference between the times for complete isothermal solidification obtained by the experiments and the conventional TLP bonding diffusion model was observed when using MBF-35. According to the simulated results, the isothermal solidification completion time for MBF-35 case was smaller than that in MBF-30. However, this experimental value obtained using MBF-35 was notably larger than that obtained using MBF-30. Isothermal solidification of liquid MBF-30 is controlled by the first isothermal solidification regime dependent on B diffusion model, whereas that of liquid MBF-35 experiences two isothermal solidification regimes and is mainly controlled by the second isothermal solidification dependent on Si diffusion model. In addition, only if Si content exceeds a critical value, the slower 2nd solidification regime will commence.

• Journal of the Korean Magnetics Society
• /
• v.8 no.4
• /
• pp.210-215
• /
• 1998

$Nd_{15}Fe_{77}B_8$ and $Nd_{16}Fe_{76}B_8$ powders were prepared by mechanical alloying in Ar atmosphere, and their phases and magnetic properties were investigated with as a function of the annealing temperature. It was found that the mechanical alloyed $Nd_{16}Fe_{76}B_8$ powder for 450 hours was amorphous phase with a part of $\alpha$-Fe crystallites. The obtained powders at 700 $^{\circ}C$ for 30 minute resulted in two phase of $Nd_2Fe_{14}B$ and $NdB_6$ by the solid-state reaction. The mechanical alloyed $Nd_{16}Fe_{76}B_8$ powder for 450 hour and annealed at 700 $^{\circ}C$ for 30 minute was showed $_iH_c\;of\;9.91\;kOe,\; B_{max}\;of\;12.93\;kG,\;Br\;of\;7.6\;kG\;and\;(BH)_{max}\;10.1\;MGOe$.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.9
• /
• pp.1642-1649
• /
• 2007

The lumped element isolators with temperature compensation magnetic circuits were designed in this paper. Isolators for mobile repeater at each band of K-PCS, GSM1900, W-CDMA, WiBro were fabricated by using optimum parameters of EM simulation, Form the results of this study, first of all, insertion loss at K-PCS band was below 0.2 dB and return loss was over 25dB. The bandwidth in isolation 23dB was found 30 MHz. Secondly, the figures of both losses at GSM1900 were 0.25dB and 23dB, respectively. The measured bandwidth in isolation 30dB was 60MHz. Thirdly, the losses at W-CDMA band were 0.15dB and 25dB. The bandwidth in isolation 24.8dB was found 60Mhz. Finally, the figures of both losses at Wibro band were 0.25dB and 23dB, respectively. The measured bandwidth in isolation 22.1dB was 100Mhz. In addition, the results of measured IMD were shown from 76.4dBc to 80.1dBc.

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.323-326
• /
• 1998

A LNA(Low Nosise Amplifer) module for the Ka-band satellite transponder has been developed, which is composed of developed two MMIC chips and 50$\Omega$ line. This LNA exhibited noise figure less than 3.12dB, linear gain higher than 32dB from 30.085GHz to 30.885GHz frequency range. Temperature test from $20^{\circ}to$ $60^{\circ}C$ of the LNA Module showed very small noise figure and linear gain variation of 0.2 dB and 0.4dB.

• Elastomers and Composites
• /
• v.46 no.1
• /
• pp.37-44
• /
• 2011

Effect of organo nanoclay (Cloisite 30B) on the polyesterification of adipic acid (AA) with diethylene glycol(DEG) was investigated with p-toluene sulfonic acid (p-TSA) (Br${\phi}$nsted acid) and butylchlorotin dihydroxide (Lewis acid) catalyst at 383 and 423 K. The initial [OH]/[COOH] molar ratio was two and the concentration of the catalysts in the reactants was 0.14 mol% based on the total reactants. The kinetics of the polyesterification was interpreted with the conversion data that was calculated from the acid values of the reactant-product mixture. The reaction rate of the polyesterification, which was catalyzed with p-TSA, exhibited the second-order dependency on AA concentration. When Butylchlorotin dihydroxide was used, the reaction rate revealed the first-order dependency on AA concentration. The activation energy of the reactions catalyzed with p-TSA and Butylchlorotin dihydroxide were calculated at 42.2 and 63.8 kJ/mol, respectively. Addition of 5 wt% Cloisite 30B to the reactant significantly diminished the activity of p-TSA, so the reaction rate decreased and the activation energy was calculated at 72.9 kJ/mol. Butylchlorotin dihydroxide catalyst maintained its activity regardless of the addition of Cloisite 30B to the reactant and the activation energy was calculated to 61.8 kJ/mol. Lewis acid catalyst, butylchlorotin dihydroxide, was more effective than Br${\phi}$nsted acid catalyst for the esterification of AA with DEG.

• Development and Reproduction
• /
• v.2 no.1
• /
• pp.29-37
• /
• 1998

To investigate the role of oviductal environment in early mammalian development, we examined the effects of bovine oviductal fluid (bOF) on the development of mouse 2-cell embryos in vitro. All of the embryos cultured in medium containing 5% or more of bOF underwent degeneration after 48 hr, whereas only 5% of embryos cultured in the absence of bOF degenerated. When bOF was heated at 65 \circ C for 30 min and then added to the culture medium, the embryotoxic effect of bOF was not removed at all such that none of the embryos remained alive after 48 hr. However, when bOF heated at 90 \circ C for 30 min was added to the culture, nearly most (95%) of embryos was alive. Similarly, pretreatment of bOF with 0.1% chymotrypsin for 1 hr or overnight following heating at 65 \circ C resulted in the development of 95.5% of mouse 2-cell embryos to early blastula after 48 hr culture in the presence of treated bOF. Interestingly addition of an anti-oxidant removed the evbryotoxic effect of bOF so that 91.0% of 2-cell embryos developed to morulae or blastulae in the presence of both 5% bOF and 10 mM of glutathione (GSH) after 48 hr culture. Neither oxidized form of GSH (GSSG) nor other antioxidants, however, could support the embryonic development in the presence of bOF. From these results, it is suggested that bOF contains a protein-like factor(s) which becomes embryotoxic by exposing in vitro, probably via oxidation reaction.

• Journal of Environmental Health Sciences
• /
• v.22 no.1
• /
• pp.36-44
• /
• 1996

A comparison was made of two detection methods(UV absorbence detection and fluorescence detection with pre-column derivatization, with trifluoroacetic acid) coupled with HPLC for the simultaneous determination of aflatoxin $B_1, B_2, G_1$ and $G_2$. A good separation of the four aflatoxins was achieved on a reversed-phase $C_{18}$ column (30 cm x 3.9 mm) with methanol-acetonitrile-water(20+20+60) for absorbence detection or acetonitrile-water(25+75) for fluorescence detection at the flow rate of 1.0 ml/min. The calibration graphs were linear over the ranges 100 ppb-1 ppm for $B_1/G_1$ and 30~300 ppb for $B_2/G_1$ with absorbence detection, and 1~500 ppb for $B_1/G_1$ and 0.3~150 ppb for $B_2/G_2$ with fluorescence detection. The correlation coefficients were greater than 0.94 and 0.99 for absorbance detection and for fluorescence detection, respectively. The detection limit was 100 ng for $B_1/G_1$ and 30 ng for $B_2/G_2$ with absorbence detection, and 1 ng for $B_1/G_1$ and 0.3 ng for $B_2/G_2$ with fluorescence detection. Recovery rates of aflatoxin $B_1, B_2, G_1$ and $G_2$ added to yeast-extract sucrose broth medium were 66.6%, 59.4%, 67.5% and 59.2%, respectively, for absorbence detection and 82.9%, 71.5%, 80.0% and 69.3%, respectively, for fluorescence detection. The four aflatoxins in culture medium were quantitatively detected by the two methods. The aflatoxins in the rice sample were not detected the absorbence detection method, but were below 10 ppb using the fluorescence detection method. Analysis of aflatoxins by both the absorbence and fluorescence methods coupled with HPLC showed acceptable linearity and good recovery. The absorbence detection was less timeconsuming and safer for treatment. The fluorescence detection was more elective and sensitive though elevated $B_1$ and $G_1$ contents were determined from the TFA-induced conversion of $B_1$ to $B_{2a}$ and $G_1$ to $G_{2a}$.

• Journal of Welding and Joining
• /
• v.30 no.5
• /
• pp.70-75
• /
• 2012

This study is related to the laser weldability of AZ31B magnesium alloy, an all-purpose wrought alloy with good strength and ductility. In general, AZ31B is classified into AZ31B-H24 and AZ31B-O depending on temper designation. Thus, in this study, the laser weldability of AZ31B-H24 and AZ31B-O was investigated and compared. CW Nd:YAG laser was used to produce bead and butt joints. And the effects of welding conditions on the weldability of these joints were examined in detail. As a result of this study, AZ31B-H24 was found to have thinner oxide film and smaller grain size compared with AZ31B-O. Due to such difference, in bead welding, AZ31B-H24 had more wide welding range for full penetration compared with AZ31B-O. Furthermore, it was also confirmed that AZ31B-H24 and AZ31B-O have different welding conditions to obtain stable keyhole in butt welding.

• Korean journal of food and cookery science
• /
• v.7 no.4
• /
• pp.15-22
• /
• 1991

Changes in cooking properties of kidney beans A (reddish purple), B (mosaic), and C (pale yellow) during storage at $4^{\circ}$, $20^{\circ}$ and $30^{\circ}C$ for 5 months were examined. The weight and volume gains of raw beans during soaking at $30^{\circ}C$ were the greatest in kidney bean A followed by B and C, which were decreased from 3 months storage at $30^{\circ}C$. The weight gain, solid loss and hardness of cooked beans at $100^{\circ}C$ for 40 min decreased from 3 months of storage at $30^{\circ}C$ in all samples. The amylograms of whole kidney bean flours showed no peak and continuous increase of viscosity during heating. The kidney bean A showed the higher values in all reference points than kidney beans B and C which had similar amylogram patterns.

• Archives of Pharmacal Research
• /
• v.15 no.4
• /
• pp.347-355
• /
• 1992

To elucidate structure of group "a" epitope, mouse antibodies that express idiotype monoclonal antibody and anti-idiotype monoclonal antibody against the group specific "a" determinant were purified by hydroxyapatite column. To obtain hepatitis B surface antigens (HBsAg). HBsAg positive blood was sequencially purified by ammonium sulfate precipitation, hydroxyapatite, sepharose 4B column chromatography and ultracentrifugation. The major protein (p25) and glycoprotein (gp30) of HBsAg were isolated by concanavalin-A-sepharose 4B. The ability of p25-gp30 among the HBsAg to inhibit the idiotype-anti-idiotype reaction was dependent on conformation, since reduced and alkylated p25-gp30 virtualy lost their inhibitory capacity when compared to native HBsAg. The data suggest that hepatitis B antigen is a conformational antigen critically dependent upon the disulfide bonds of p25-gp30.