• International Journal of Internet, Broadcasting and Communication
• /
• 제14권3호
• /
• pp.249-257
• /
• 2022

In recent years, if we order food by easily accessing the online market with our smartphone, we can receive the product in a fresh state at dawn the next day. Cold chain is an industry that can create high added value because it has both the characteristics of general logistics and sensitivity to temperature. Based on the electrical specifications derived from the reefer container capacity requirement investigation, we proved that power supply to up to 33 reefer containers can be made by using three additional auxiliary power supplies which are applied for freight trains in Korea. In this paper, we conducted a research on a design of power supply system for freight train reefer container based on simulation as a basic research necessary for low-temperature distribution and cold chain construction based on the reefer container railroad. Consequently, the simulation was conducted using the three-phase inverter diagram in PSIM and the SVPWM (3-harmonic injection method) control technique, and it was verified that the required power voltage was satisfied with 622V_dc, which is lower than the input voltage of general SPWM of 718V_dc. The details of this paper could be used as a foundational study for constructing cold chains based on a reefer container dedicated to freight trains in the future.

• 전력전자학회논문지
• /
• 제6권6호
• /
• pp.498-505
• /
• 2001

본 논문은 PV어레이를 이용한 양수펌프 시스템의 전체적인 제어를 구상하는 제시하였으며, DC/DC 컨버터를 생략하기 위하여 BLDC 모터의 벡터제어를 이용하고 DC량과 AC량과 관계를 찾아내어 인버터만으로 PV 어레이의 최대출력점을 추적하였다. 기존의 최대출력점 제어기는 3상 인버터의 DC 링크단에 나타나는 전류리플로 인하여 제어기가 불안정하게 된다. 따라서 본 연구에서는 제어기의 불안정성을 보완하기 위해 BLDC 모터의 $i_qs$ 전류를 이용한 MPPT(Maximum Power Point Tacker) 제어 알고리즘을 구성하였다. 이러한 제어기의 우수함을 입증하기 위하여 J. A Domfnguez가 비동기모터에 적용한 제어방식을 BLDC 모터에 적용한 결과와 본 논문에서 제시한 제어방식을 시뮬레이션 및 실험을 통하여 비교 검토하고 하였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2005년도 전력전자학술대회 논문집
• /
• pp.14-16
• /
• 2005

In this paper, a new control scheme to use 6-switch inverters for 3-phase switched reluctance motors (SRM) is proposed. Compared with the conventional asymmetric converter topology, it can minimize the entire system size and cost and can increase the efficiency. Therefore, it may have a new topology for SRM to compete the other ac motors, such as induction motors, brushless dc motors, and soon. The validity of the proposed method is verified by simulation, and experimental results.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 Proceedings ICPE 98 1998 International Conference on Power Electronics
• /
• pp.648-653
• /
• 1998

The conventional three-phase rectifier with bulky LC output filter has been widely used in the industry because of its distinctive advantages over the active power factor correction rectifier such as simple circuit, high reliability, and low cost. Over than 0.9 power factor can be achieved, which is acceptable in most of industry applications. This rectifier, however, is not easy to use for high power density applications since the LC filter is bulky and heavy. To solve this problem, a new simple rectifier is presented in this paper. By eliminating the bulky LC filter from the conventional diode rectifier without losing most of the advantages of the conventional rectifier, very high power density power conversion with high power factor can be achieved. Operation principle and design considerations are illustrated and verified by Pspice simulation and experimental results from a prototype of 3.3 kW rectifier followed by 100KHz zero voltage switching full bridge PWM converter

• Journal of Power Electronics
• /
• 제16권3호
• /
• pp.1176-1189
• /
• 2016

In this paper, a novel quasi-direct power control (Q-DPC) scheme based on a resonant frequency adaptive proportional-resonant (PR) current controller with a variable frequency resonant phase locked loop (RPLL) is proposed, which can achieve a fast power response with a unity power factor. It can also adapt to variations of the generator frequency in T-type Three-level shaft synchronous generator (SSG) converters. The PR controller under the static α-β frame is designed to track ac signals and to avert the strong cross coupling under the rotating d-q frame. The fundamental frequency can be precisely acquired by a RPLL from the generator terminal voltage which is distorted by harmonics. Thus, the resonant frequency of the PR controller can be confirmed exactly with optimized performance. Based on an instantaneous power balance, the load power feed-forward is added to the power command to improve the anti-disturbance performance of the dc-link. Simulations based on MATLAB/Simulink and experimental results obtained from a 75kW prototype validate the correctness and effectiveness of the proposed control scheme.

• 한국전자통신학회논문지
• /
• 제16권1호
• /
• pp.45-52
• /
• 2021

3상 PWM 정류기에 대한 공간벡터제어 기반 전압제어방식은 스위칭 구간에 대한 스위칭 패턴을 설계해야하기 때문에 최적한 스위칭 패턴을 설계하는데 많은 노력이 요구된다. 본 연구에서는 3상 6펄스 전압형 PWM 정류기를 위한 D-Q 제어에 기반 한 SPWM 출력전압 제어 알고리즘을 연구하였다. 출력전압제어 알고리즘에서 3상 기준신호들은 공간벡터 표시법에 기반 한 D-Q 변환으로부터 얻어지며 스위칭 패턴 대신에 SPWM 방식을 이용하여 정류기 스위칭 제어 신호들을 생성하도록 하였다. 다음으로, EMTP-RV를 이용하여 D-Q 제어기반 SPWM 방식을 가지는 3상 6펄스 전압형 PWM 정류기를 모델링하였다. 끝으로, EMTP-RV 시뮬레이션을 통해 얻어지는 출력전압파형을 기준 값과 비교, 출력전압이 기준전압을 정확하게 추종함을 확인함으로서 D-Q 제어기반 SPWM 전압제어 알고리즘의 유효성을 확인할 수 있었다.

• Journal of Power Electronics
• /
• 제6권3호
• /
• pp.226-234
• /
• 2006

Photovoltaic (PV) generators have nonlinear V-I characteristics and maximum power points which vary with illumination level and temperature. Using a maximum power point tracker (MPPT) with an intermediate converter can increase the system efficiency by matching the PV systems to the load. This paper presents a maximum power point tracker based on fuzzy logic and a control scheme for a single-phase inverter connected to the utility grid. The fuzzy logic controller (FLC) provides an adaptive nature for system performance. Also the FLC provides excellent features such as fast response, good performance and the ability to change the fuzzy parameters to improve the control system. A single-phase AC-DC inverter is used to connect the PV system to the grid utility and local loads. While a control scheme is implemented to inject the PV output power to the utility grid at unity power factor and reduced harmonic level. The simulation results have shown the effectiveness of the proposed scheme.

• Journal of Electrical Engineering and Technology
• /
• 제12권2호
• /
• pp.594-600
• /
• 2017

HVDC transmission systems can be configured in many ways to take into account cost, flexibility and operational requirements. [1] For long-distance transmission, HVDC systems may be less expensive and suffer lower electrical losses. For underwater power cables, HVDC avoids the heavy currents required to charge and discharge the cable capacitance of each cycle. For shorter distances, the higher cost of DC conversion equipment compared to an AC system may still be warranted, due to other benefits of direct current links. HVDC allows power transmission between unsynchronized AC transmission systems. Since the power flow through an HVDC link can be controlled independently of the phase angle between the source and the load, it can stabilize a network against disturbances due to rapid changes in power. HVDC also allows the transfer of power between grid systems running at different frequencies, such as 50 Hz and 60 Hz. This improves the stability and economy of each grid, by allowing the exchange of power between incompatible networks. This paper proposed to establish Korean HVDC technology through a cooperative agreement between KEPCO and LSIS in 2010. During the first stage (2012), a design of the ${\pm}80kV$ 60MW HVDC bipole system was created by both KEPCO and LSIS. The HVDC system was constructed and an operation test was completed in December 2012. During the second stage, the pole#2 system was fully replaced with components that LSIS had recently developed. LSIS also successfully completed the operation test. (2014.3)

• 전력전자학회논문지
• /
• 제10권6호
• /
• pp.569-577
• /
• 2005

본 논문에서는 일반적으로 교류 전동기 구동을 위해 널리 사용되고 있는 6-switch IGBT module을 3상 SRM에 적용한 새로운 구동 방법을 제안한다 비대칭 브리지 컨버터의 경우 사용되는 소자수가 많고 복잡한 제어 및 구동회로를 요구하며 이로 인하여 전체적인 시스템 가격은 상승하게 된다. SRM구동을 위한 비대칭 브리지 컨버터의 구동 방법과 비교하여 본 논문에서 제안한 구동방법은 전체적인 시스템의 크기와 파격을 줄일 수 있다. 따라서 유도기, BLDC 모터, 그 외의 모터등과 비교할 수 있는 SRM 구동을 위한 새로운 토폴로지가 될 수 있다. 제안된 회로의 타당성을 검증하기 위해 비대칭 브리지 컨버터를 적응한 시스템과의 비교 실험을 진행하였다.

• International Journal of Internet, Broadcasting and Communication
• /
• 제14권2호
• /
• pp.79-88
• /
• 2022

Recently, securing stable supply of fresh food is deemed as one of the important tasks. Accordingly, now the presence of cold chain along with the needs of a comfortable and healthy life is growing as the online market expands and the contactless industry grows, however, cold chain is being studied only in the aspect of ground and sea transportation. And, due to global warming and strengthening global environmental regulations, we believe that it is necessary to convert the existing road-centered logistics system into a railway-centered logistics system, a low-carbon transportation means. Therefore, in this paper we calculated the maximum energy required by the reefer container as a basic research necessary for constructing the low temperature distribution and cold chain based on the reefer container railway, and conducted a study on methods of supplying the reefer container power utilizing 1. tramline, 2. battery, 3. generator. The results of this paper can be utilized as a foundational study for building a cold chain based on a reefer container dedicated to freight trains in the future.