• 대한치과기공학회지
• /
• 제39권1호
• /
• pp.35-42
• /
• 2017

Purpose: The purpose of this paper was to evaluate the occurrence of errors regarding adaptation by conducting a three-dimensional assessment comparing the bridge type dental restoration after the cutting process, which has multiple abutments, with a single type dental restoration. Methods: By using ten identical files obtained by scanning the master model, thirty designs were created consisting of ten maxillary right first premolars and ten maxillary right first molars with single crown abutments, along with ten bridge designs with the identical abutment. A 5-axis milling machine was used to produce the design file. The produced denture prostheses were scanned using a silicone replica for a STL file. An evaluation was conducted using 3D analysis software on the master model and each of the thirty data files. Results: The RMS value of the pre-molar (14) was $38.4{\pm}4{\mu}m$ for single and $54.7{\pm}6{\mu}m$ for bridge abutment; therefore, a statistically significant difference was observed for single and bridge designs although both shared the same abutment form (P<.05). Also, the RMS value of the molar (16) was $47.6{\pm}2{\mu}m$ and $56.6{\pm}5{\mu}m$ for the single and bridge designs, respectively, thereby presenting a statistically significant difference (P<.05). Conclusion: As a result, dental prosthesis fabricated using the single method presented better internal adaptation outcomes.

• 한국기계가공학회지
• /
• 제21권9호
• /
• pp.56-62
• /
• 2022

This study analyzed the output precision of 3D printing methods. The inner impeller of the centrifugal compressor was printed in as a sheet with 100% packing density using two methods: field deposition modelling and stereolithography. Dimensional differences between the initial CAD and printed models were evaluated using a 3D scanner. To investigate the dimensional characteristics of the 3D printed impeller, 3D dimension analysis and point dimension analysis were performed. The point dimension analysis was divided into 3D and 2D for comparative analysis.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1988년도 한국자동제어학술회의논문집(국내학술편); 한국전력공사연수원, 서울; 21-22 Oct. 1988
• /
• pp.273-278
• /
• 1988

This paper represents the computer application techniques of initial and modification machining for dies with 3-dimensional scluptured surfaces. All procedures from die design to die machining and measurement are covered. The component of modelling is data management and modification (extrapolation and smoothing), surface modelling, and nc program preparation. Also this paper introduces the utility for successful and efficient operation of system such as map generation, data communication, tool path verification, contour map generation, graphic processing of extrapolation and smoothing results, and CAD/CAM system interface. Examples are given to illustrate the modelling.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.41-44
• /
• 2001

In reverse engineering, the whole surfaces of the three-dimensional(3D) product are measured using 3D positional scanners. The raw triangle meshes constructed from a scanned point set are not well suited for direct use in the downstream activities. This is because the amount of triangle meshes may be very large(from millions to hundreds of millions) and usually distorted by scanning error. Furthermore, the triangle meshes may contain several holes that must be filled. Thus, several solutions have to be addressed and implemented before a complete CAD models can be acquired. This paper discusses on the algorithms of decimation, smoothing, and hole-filling that are crucial to refine the triangle meshes. Several examples are also given and discussed to validate the system.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제39권4호
• /
• pp.197-199
• /
• 2013

Three-dimensional (3D) computed tomography image models are helpful in reproducing the maxillofacial area; however, they do not necessarily provide an accurate representation of dental occlusion and the state of the teeth. Recent efforts have focused on improvement of dental imaging by replacement of computed tomography with other detailed digital images. Unfortunately, despite the advantages of medical simulation software in dentofacial analysis, diagnosis, and surgical simulation, it lacks adequate registration tools. Following up on our previous report on orthognathic simulation surgery using computer-aided design/computer-aided manufacturing (CAD/CAM) software, we recently used the registration functions of a CAD/CAM platform in conjunction with surgical simulation software. Therefore, we would like to introduce a new technique, which involves use of the registration functions of CAD/CAM software followed by transfer of the images into medical simulation software. This technique may be applicable when using various registration function tools from different software platforms.

• 디자인학연구
• /
• 제21권
• /
• pp.89-97
• /
• 1997

제품디자이너는 2차원과 3차원의 조형정보를 공유하고 있지만, 최근 3차원 조형정보에 대한 중요성의 대두와 개발환경의 변화로 3차원 형상정보의 시각적인 확인에서 조형적인 실물 확인과 데이터화의 요구가 증가하고 있다. 본 연구는 CAD에 의한 3차원 모델 링 정보와 수 작업에 의한 MOCK-UP 정보에 대하여 가공 TOOLS과 REVERSE DESIGN TOOLS를 이용한 효율적인 제품 디자인 조형정보의 데이터화를 위한 방법을 제시하고자 한다.

• Restorative Dentistry and Endodontics
• /
• 제26권6호
• /
• pp.464-484
• /
• 2001

When restoring a tooth, the dentist tries to choose the ideal material for existing situation. One criterion that is considered is its suitability for restoring coronal strength. As more tooth structure is removed, the cusps are weakened and susceptible to fracture. Further, this increased deformation may cause the formation of intermittent gaps at the margin between the hard tissue and the restoration, facilitating marginal leakage. The improvements in ceramic materials now make it possible for alternatives to amalgams, composites, and cast metal to be of offered for posterior teeth. Of the materials used, ceramics most closely approximates the properties of enamel. The introduction of computer-aided design/computer-aided manufacture(CAD/CAM) systems to restorative dentistry represents a major technological breakthrough. It is possible to design and fabricate ceramic restorations at a single appointment. Additionally, CAD/CAM systems eliminate certain errors and inaccuracies that are inherent to the indirect method and provide an esthetic restoration. The aim of this investigation was to study the loading characteristics of CAD/CAM ceramic inlay and to compare the stress distribution and displacement associated with different designs of cavity(the isthmus width and cavity depth). A human maxillary left first premolar was prepared with standard mesio-occlusal cavity preparation, as recommended by the manufacturer Ceramic inlay was fabricated with CEREC 2 CAD/CIM equipment and cemented into the prepared cavity. Three dimensional model was made by the serial photographic method. The cavity width was varied $\frac{1}{3}$, $\frac{1}{2}$ and $\frac{2}{3}$ of intercuspal distance between buccal and lingual cusp tip. The cavity depth was varied 1.5mm and 2.3mm. So six models were constructed to simulate six conditions. A point load of 500N was applied vertically onto the first node of the lingual slope from the buccal cusp tip. The stress distribution and displacement were solved using ANSYS finite element program(Swanson Analysis System). (omitted)

• 대한치과보철학회지
• /
• 제59권4호
• /
• pp.442-450
• /
• 2021

컴퓨터 지원 설계 및 제조 기법(CAD-CAM)은 치과 영역에서 급속도로 발전해온 분야로, 다양한 보철 치료 영역에 적용되고 있다. 이 중 절삭형 방식(Subtractive Manufacturing)으로 분류되는 절삭가공 기법을 이용한 의치 제작은 상용화된 디지털 총의치 제작 방식 중 하나이며, 동시에 첨가형 방식(Additive Manufacturing)으로 분류되는 레이저 소결 혹은 용융 기법을 활용하여 피개의치를 위한 금속구조물을 보다 효율적으로 제작할 수 있게 되었다. 본 증례에서는, CAD-CAM을 통해 절삭형 방식으로 제작한 상악 총의치와 3D 금속 프린팅을 이용한 금속구조물과 절삭형 방식으로 제작된 인공치를 접목한 하악 임플란트 피개의치를 제작하였다. 이를 통해 기능적, 심미적으로 적절한 임상적 결과를 얻었으므로 이를 보고하는 바이다.

• 한국정밀공학회지
• /
• 제13권10호
• /
• pp.46-55
• /
• 1996

As industrial standard data, the STL format which approximates three dimensional CAD model to triangular facets, is used for RP(Rapid Prototyping) system in recent days. Because most RP system take the only form of two dimensional line segments as an input stream inspite of its imperfectness while converting into STL format, a CAD model is converted into a standard industrial format which is composed of many triangular facets. The error verifying process is composed of four main steps, and these are 1) Remove facets with two or more vertices equal to each other. 2) Fix overlapping error such as more than three facets adjacent to anedge. 3) Fill holes in the mesh by using Delaunay triangulation method. 4) Correct the wrong direction and normal vectors. This paper is concerned with serching the mentioned errors in advance and modifying them.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.11-14
• /
• 2001

In all Rapid Prototyping(RP) processes, computer-aided design(CAD) solid model is sliced into thin layers of uniform, but not necessarily constant, thickness in the building direction. Each cross-sectional layer is successively deposited and, at the same time, bonded onto the previous layer, the stacked layers form a physical part of the model. The objective of this study is to develop a method for obtaining necessary coordinates$(x,\;y,\;\theta_x,\;\theta_y)$ to position linear hotwire of the cutting system in three-dimensional space for the Variable Lamination Manufacturing process (VLM-S), which utilizes expandable polystyrene foam sheet as part material. In order to examine the applicability of the developed method to VLM-S, various three-dimensional shapes, such as a spanner, a patterned columm, and a pyramid were made using data obtained from the method.