In order to examine the generation mechanism of long ocean waves along the west coast of Korea and to understand the amplification process of the long ocean waves, sea level, atmospheric pressure and wind data observed every minute from 2007 March 29 to 2007 April 1 were analyzed and onedimensional numerical ocean model experiments were performed. An atmospheric pressure jump propagated southeastward from Backryungdo to Yeonggwang along the west coast of Korea with speed of $13{\sim}27\;m/s$ between 2007 March 30 23:00 and 2007 April 1 1:30. Average magnitude of pressure jump was 4.2 hPa. As a moving atmospheric jump propagated from north to south along the coast, long ocean waves were generated and the sea level abnormally rose or fell at Anheung, Kunsan, Wido and Yeonggwang. Average amplitude of sea level rise (or fall) was about 113.6 cm. In a one-dimensional numerical ocean model, nonlinear shallow water equations were numerically integrated and a moving atmospheric pressure jump with traveling speed of 24 m/s was used as an external force. While the atmospheric pressure jump travels over 60 m depth ocean, a long ocean wave is generated. Because the propagation speed of the atmospheric jump is almost equal to that of the long ocean wave, Proudman resonance occurs and the long ocean wave amplifies. As the atmospheric pressure jump moves into the coastal area shallower than 60 m, the speed of the long ocean wave decreases and Proudman resonance effect decreases. However, the amplitude of the long ocean wave increases and wave length becomes shorter because of shoaling effect. When the long ocean wave hits the land boundary, amplitude of the long ocean wave drastically amplifies due to reflection. Data analysis and numerical experiments suggest that the southeastward propagation of an atmospheric pressure jump over the shallow ocean, which is a necessary condition for Proudaman resonance, generated the long ocean waves along the west coast of Korea on 2007 March 31 and the ocean waves amplified due to shoaling effect in the coastal area and reflection at the shore.
In this work, the effects of shade combination, shade height and wind regime on greenhouse climate were quantified. A two-dimensional (2-D) computational fluid dynamics (CFD) model was developed based on an 11-span plastic greenhouse in eastern China for wind almost normal to the greenhouse orientation. The model was first validated with air temperature profiles measured in a compartmentalized greenhouse cultivated with mature lettuce (Lactuca sativa L., 'Yang Shan'). Next, the model was employed to investigate the effect of shade combinations on greenhouse microclimate patterns. Simulations showed similar airflow patterns in the greenhouse under different shade combinations. The temperature pattern was a consequence of convection and radiation transfer and was not significantly influenced by shade combination. The use of shade screens reduced air velocity by $0.02-0.20m{\cdot}s^{-1}$, lowered air temperature by $0.2-0.8^{\circ}C$ and raised the humidity level by 0.9-2.0% in the greenhouse. Moreover, it improved the interior climate homogeneity. The assessment of shade performance revealed that the external shade had good cooling and homogeneity performance and thus can be recommended. Furthermore, the effects of external shade height and wind regime on greenhouse climate parameters showed that external shade screens are suitable for installation within 1 m above roof level. They also demonstrated that, under external shade conditions, greenhouse temperature was reduced relative to unshaded conditions by $1.3^{\circ}C$ under a wind speed of $0.5m{\cdot}s^{-1}$, whereas it was reduced by merely $0.5^{\circ}C$ under a wind speed of $2.0m{\cdot}s^{-1}$. Therefore, external shading is more useful during periods of low wind speed.
Adhesive bonding is currently widely used in many industrial fields, particularly in the aeronautics sector. Despite its advantages over mechanical joints such as riveting and welding, adhesive bonding is mostly used for secondary structures due to its low peel strength; especially if it is simultaneously exposed to temperature and humidity; and often presence of bonding defects. In fact, during joint preparation, several types of defects can be introduced into the adhesive layer such as air bubbles, cavities, or cracks, which induce stress concentrations potentially leading to premature failure. Indeed, the presence of defects in the adhesive joint has a significant effect on adhesive stresses, which emphasizes the need for a good surface treatment. The research in this field is aimed at minimizing the stresses in the adhesive joint at its free edges by geometric modifications of the ovelapping part and/or by changing the nature of the substrates. In this study, the finite element method is used to describe the mechanical behavior of bonded joints. Thus, a three-dimensional model is made to analyze the effect of defects in the adhesive joint at areas of high stress concentrations. The analysis consists of estimating the different stresses in an adhesive joint between two 2024-T3 aluminum plates. Two types of single lap joints(SLJ) were analyzed: a standard SLJ and another modified by removing 0.2 mm of material from the thickness of one plate along the overlap length, taking into account several factors such as the applied load, shape, size and position of the defect. The obtained results clearly show that the presence of a bonding defect significantly affects stresses in the adhesive joint, which become important if the joint is subjected to a higher applied load. On the other hand, the geometric modification made to the plate considerably reduces the various stresses in the adhesive joint even in the presence of a bonding defect.
광학측정기법 중 주파수 스캐닝 간섭계는 기존 3차원 측정기법과 비교하여 광학 하드웨어 구조가 측정과정동안 고정되어 있어, 대물렌즈나 대상물체의 수직 스캐닝 없이 단지 광원의 주파수만 특정한 주파수 밴드내에서 스캐닝 하여 대상물체에 주사되므로, 우수한 광학 측정 성능을 보인다. 광원의 주파수를 변경하여 간섭계를 통해 간섭 영상을 획득한 후, 밝기 영상 데이터를 주파수 영역 데이터로 변환하고, 고속 푸리에 변환을 통한 주파수 분석을 이용하여 대상 물체의 높이 정보를 계측한다. 하지만, 대상물체의 광학적 특성에 기인한 광학노이즈와 주파수 스캐닝동안 획득되는 영상의 수에 따라 증가하는 영상처리시간은 여전히 주파수 스캐닝 간섭계의 문제이다. 이를 위해, 1) 편광기반 주파수 스캐닝 간섭계가 광학 노이즈에 대한 강인성을 확보하기 위해 제안되어진다. 시스템은 주파수 변조 레이저, 참조 거울 앞단의 ${\lambda}/4$ 판, 대상 물체 앞단의 ${\lambda}/4$ 판, 편광 광분배기, 이미지 센서 앞단의 편광기, 광섬유 광원 앞단의 편광기, 편광 광분배기와 광원의 편광기 사이에 위치하는 ${\lambda}/2$ 판으로 구성된다. 제안된 시스템을 이용하여, 편광을 기반으로한 간섭이미지의 대조대비를 조절할 수 있다. 2) 신호처리 고속화 방법이 간섭계 시스템을 위해 제안되며, 이는 그래픽 처리 유닛(GPU)과 같은 병렬처리 하드웨어와 계산 통합 기기 구조(CUDA)와 같은 프로그래밍 언어로 구현된다. 제안된 방법을 통해 신호처리 시간은 실시간 처리가 가능한 작업시간을 얻을 수 있었다. 최종적으로 다양한 실험을 통해 제안된 시스템을 정확도와 신호처리 시간의 관점으로 평가하였고, 실험결과를 통해 제안한 시스템이 광학측정기법의 실적용을 위해 효율적임을 보였다.
무인항공기 (UAV, Unmanned Aerial Vehicle)에 탑재되는 다양한 센서들 중에서 GPS (Global Positioning System) 수신기는 GPS 신호를 기반으로 정지비행 (hovering flight), 경로비행 (waypoint flight) 등 다양한 임무의 수행을 돕는다. GPS신호가 원활하게 수신되는 환경에서는 GPS 수신기를 활용할 수 있지만, 최근에 무인항공기의 활용을 시설물 모니터링, 배송, 레저 등 다양한 분야로 용도가 확대하면서 무인항공기의 비행 장소가 다양해지고 있다. 이러한 원인으로 무인항공기가 GPS 신호의 제약을 받는 음영지역이나 고층 빌딩이 밀집한 지역 등을 비행하면서 신호가 단절되거나 멀티패스로 인해 신호 에 다양한 잡음이 포함될 수 있다. 이에 본 연구에서는 무인항공기의 3차원 위치 결정을 위하여 해석 사진 측량 기법과 오토트래킹 토탈스테이션 기법을 이용하였다. 해석 사진 측량 기법으로는 중심투영의 기하학적 원리인 공선조건식 (collinearity equation)을 이용한 광속조정법을 기반으로 하였으며, 오토 트래킹 토탈스테이션 기법은 360도 프리즘 타깃을 초단위 이하로 추적하는 원리를 기반으로 하였다. 두 가지 기법에서 무인항공기의 위치 결정을 위해 사용된 타깃은 무인항공기 상단에 각각 탑재하였으며, 타깃간에는 x, y, z방향으로 기하학적 이격이 존재한다. 무인항공기의 비행 속도에 따른 결과 확인을 위해 0.86m/s, 1.5m/s, 2.4m/s로 속도를 달리하여 데이터를 취득하였으며, 타깃의 기하학적 이격을 통해 정확도평가를 하였다. 그 결과 무인항공기의 이동 경로인 x, y 방향으로는 최소 1mm에서 최대 12.9cm까지 오차가 발생하였고 비교적 이동이 적은 z 방향으로는 비행 속도와 무관하게 동일하게 7cm 오차가 발생하였다.
본 연구는 의류 브랜드 온라인 커뮤니티의 이용욕구충족과 커뮤니티 몰입간의 관계 및 이들 관계에 대한 브랜드 이미지의 조절효과를 검증하는 것이다. 9개 캐주얼 의류 브랜드 커뮤니티 회원 317명을 대상으로 온라인 서베이를 실시하여 자료를 수집하였다. 다중회귀분석 결과, 의류 브랜드 커뮤니티에서의 이용욕구 충족은 커뮤니티에 대한 몰입과 유의한 관계가 있었다. 그리고 조절회귀분석 결과, 의류 브랜드 커뮤니티에서의 관계욕구 충족이 커뮤니티 몰입(감정적 몰입, 지속적 몰입, 규범적 몰입)에 영향을 미칠때 의류 브랜드 이미지 수준에 따른 조절효과가 작용함이 발견되었다. 또한 의류 브랜드 이미지의 조절효과는 의류 브랜드 커뮤니티에서의 거래욕구 충족과 커뮤니티에 대한 감정적 몰입의 관계에서도 나타났다. 특히 의류 브랜드 커뮤니티인 경우, 커뮤니티에서의 관계욕구 충족수준에 따른 커뮤니티 몰입의 정도는 브랜드 이미지가 낮을 때 보다 높을 때 더 크게 나타났다. 이것은 의류 브랜드 커뮤니티에서의 이용욕구 충족을 통해 회원들의 커뮤니티 몰입을 증대시키는 전략은 의류 브랜드 이미지 수준이 다른 의류 브랜드 유형에 따라 그 효과에 차이가 있음을 의미한다. 따라서 의류기업의 마케터들은 자사 브랜드의 이미지 수준을 평가하고, 이에 맞춰 커뮤니티 몰입을 증대시키는 전략을 모색할 필요가 있다. 브랜드 커뮤니티에 대한 몰입은 브랜드에 대한 구전이나 재구매 행동과 연결되므로, 명품 의류 브랜드들인 경우 온라인 브랜드 커뮤니티를 구축하고 회원들의 커뮤니티에 대한 몰입을 증대시킴으로써 브랜드 자산을 극대화시킬 수 있을 것이다.
이 연구의 목적은 영상의 화소 간 분석(voxel-based analysis)을 이용하여 자화율 가중 영상(SWI)에 나타난 위상 마스킹의 효과를 알아보는 것이었다. 20명의 정상 노인에서 SWI 영상의 정보를 획득하기 위하여 3차원 경사자장 에코 시퀀스를 이용하여 영상을 얻었다. SWI 영상에서의 위상 마스킹의 효과를 관찰하기 위해 원래의 경사자장 크기(magnitude) 영상에 위상 영상을 2번 곱한 SWI2 영상, 4번 곱한 SWI4 영상, 영상 내 정맥 혈관을 강조한 양의 위상 마스크 SWI 영상 (PSWI), 그리고 조직 부분을 강조한 음의 위상 마스크 SWI 영상(NSWI)을 만들었다. paired t-test를 이용한 PSWI와 NSWI간 신호강도의 차이, SWI2와 SWI4간의 신호강도의 차이, 그리고 경사자장 크기영상 영상과 위상 마스킹에서 얻은 SWI 영상의 신호강도의 차이를 voxel-based 분석으로 수행하였다. 신호 강도 차이는 magnitude과 SWI4 영상 간의 차이가 magnitude과 SWI2 영상 간의 차이보다 더 크게 나왔다. 또한, 신호강도 차이는 magnitude과 PSWI 영상 간의 차이가 magnitude과 NSWI보다 더 많았다. 그리고 NSWI2와 NSWI4간의 신호강도 차이가 PSWI2와 PSWI4간의 신호강도 차이 보다 더 크게 나타났으며, 그리고 NSWI4와 PSWI4간의 신호강도 차이가 NSWI2와 PSWI2간의 신호강도 차이보다 더 크게 나타났다. 위 실험은 화소 간 분석을 통한 SWI 영상 연구가 뇌 전체의 자화율 효과를 볼 때 매우 유용할 것이라는 사실뿐만 아니라, 각기 다른 위상 마스킹 방법을 응용함으로써 선택적으로 정맥 혈관 대비, 혹은 뇌 조직 대비를 강조할 수 있다는 사실을 입증하였다. 그러므로, 자화율 가중 영상의 화소 간 분석은 많은 임상 예에 적용될 수 있을 것이다.
엉덩인공관절 수술 후 지속적으로 재활운동에 참가한 사람들을 대상으로 6개월 지난 시점과 12개월 지난 시점에서 하지근력 테스트와 지면반력 실험을 통하여 재활훈련의 효과를 비교하고 검증하였다. 엉덩관절이 $150^{\circ}$에서 $90^{\circ}$까지 굴곡하는 동안 대퇴직근의 변화를 비교해 본 결과 통계적으로는 유의한 차이(p<0.05)가 나타나지 않았으나 평균의 비교에서 약간의 차이가 있었다. 장요근 평균의 비교에서도 통계적으로 유의한 차이(p<0.05)는 나타나지 않았으나 평균의 비교에서 모든 구간에서 재활훈련기간이 길어질수록 더욱더 큰 값을 나타내고 있는 것으로 보아 굴곡과 신전에 관계하는 근력들이 체계적인 재활훈련을 받을 경우 더욱더 좋아지는 것으로 나타났다. 엉덩관절이 $0^{\circ}$에서 $45^{\circ}$까지 외전하는 동안 중둔근의 변화는 통계적으로 유의한 차이(p<0.05)는 없었으나 재활훈련에 꾸준히 12개월 동안 참가한 수술자가 6개월 재활훈련에 참가한 수술자들보다 외전동작 값이 훨씬 크게 나타났다. 소둔근의 근력변화는 중둔근 보다 외전각도가 $45^{\circ}$각도로 커지면서 12개월 재활훈련에 참가한 수술자의 근력값($0.37{\pm}0.08$)이 6개월 재활훈련 참가자 근력값($0.21{\pm}0.05$) 보다 훨씬 커지는 것으로 나타났다. 무릎관절의 모멘트 값은 통계적으로 유의한 차이(p<0.05)는 없었으나 평균의 비교에서 한 계단을 오르는 동안 시간의 경과에 따라 재활훈련이 길수록 무릎을 펴는 모멘트의 값이 더욱더 크게 증가하는 것으로 나타났다. 엉덩인공관절 수술 후 6개월 재활훈련 참가자와 12개월 재활훈련 참가자 모두 세 가지 지면반력(Fx anterior/posterior force, Fy medio/lateral force, Fz vertical force)의 형태는 통계적으로 유의한 차이는 나타나지 않았으나, 좌우면의 힘(Fy)은 6개월 재활훈련 참가자($109{\pm}45N$)가 12월 재활훈련 참가자($105{\pm}28N$)보다 큰 값을 보이고 있고, 전후면의 힘(Fx) 값은 6개월 재활훈련참가자($-107{\pm}21N$) 보다 12개월 재활훈련 참가자($-175{\pm}33N$)가 큰 값으로 나타났다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.