• 한국의류산업학회지
• /
• 제7권1호
• /
• pp.56-62
• /
• 2005

Fancy Yarn has developed diverse textures in fabrics, reducing the time in yarn and fabric production or apparel making in order to develop creative goods. In this study aimed to propose the use of a 4D box system to make fancy yarn shapes with loops, knops and spirals and the like. The change in texture was analysed and simulated to produce a suitable fabric image by using the fancy yarns fabric. The results are as follows. The plain weave, 2/2 basket weave, 2/2 twill weave, 2/2 2 complete broken weaves, and 5 harness sateen weaves were woven and a fabric image formed. In the case of the loop and the knop yarns fabric image, compared to the twisted fabric image the surface was covered by loops or some parts became partially black. In the case of the spiral shape it showed pattern continuity in spiral shapes 1, 2 and 3. The more twisted spirals produced a diamond shaped pattern or a twill line and a herring bone shaped twill line. An evenly distributed black fabric image appeared in 5 harness sateen weave. For the loop shape the broken weave or 5 harness sateen weave was produced; basket weave and broken weave for the knop yarn 1 or knop yarn 2; and for the spiral shape a plain fabric or 5 harness sateen weave were produced much similar to the fabric image. The surface texture of the mapped image compared to the twisted fabric image produces fancy yarn fabric images covered with loops or irregular spots caused by the knop and the spiral. Therefore it is appropriate or suitable for the simulation of tweed or woolen wool fabrics. The fabric image which produced consistent and continuous lines is therefore more suitable for simulations of twill or herringbone fabric images.

• Composites Research
• /
• 제29권1호
• /
• pp.33-39
• /
• 2016

본 논문에서는 3차원 평직 복합재료의 3-방향 섬유다발의 굴곡각에 따른 다양한 모델링을 구축하고, 제시한 모델에 대하여 등가 물성치를 예측하였다. 3차원 평직복합재료의 단위셀을 정의하고 미시역학 계산결과인 섬유다발 물성치를 사용하여 섬유다발에 굴곡각에 따라 물성치가 변화하도록 요소 물성축을 설정 후 3차원 평직 복합재료의 중시해석을 수행하였다. 계산결과 등가물성치는 참고문헌에 제시된 해석 및 실험값을 비교하여 타당성을 확보하였으며 계산결과 3-방향 섬유다발 굴곡각이 미치는 영향에 대하여 고찰하였다. 또한 초기파손 강도와 파손순서에 대해서도 조사하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.35.1-35
• /
• 2001

The aim of our study is to automatically analyze how textile is woven which has complicated structure, such as textile with multi-layer structure. For this purpose, we propose a method to reconstruct a textile structure of a textile is visualized. Then, the anteroposterior sections of the same yarn on the cross sectional images is associated each other by superimposing them. Therefore, by this method, 3-D information of each yarn is obtained and the 3-D shape of each yarn is independently expressed. In this research, a 3-D reconstruction of a plain weave fabric is performed.

• 패션비즈니스
• /
• 제23권3호
• /
• pp.67-84
• /
• 2019

Since the early 2000s, various fashion design products that use 3D printing technology have constantly been introduced to the fashion industry. However, given the nature of 3D printing technology, the flexible characteristics of material of textile fabrics is yet to be achieved. The aim of this study is to develop the optimal design conditions for production of flexible and elastic 3D printing fabric structure based on plain weave, which is the basic structure in fabric weaving using SLS 3D printing technology. As a the result this study aims to utilize appropriate design conditions as basic data for future study of flexible fashion product design such as textile material. Weaving structural design using 3D printing is based on the basic plain weave, and the warp & weft thickness of 4mm, 3mm, 2mm, 1.5mm, 1mm, and 0.7mm as expressed in Rhino 6.0 CAD software program for making a 3D model of size $1800mm{\times}180mm$ each. The completed 3D digital design work was then applied to the EOS SLS Machine through Maker ware, a program for 3D printer output, using polyamide 12 material which has a rigid durability strength, and the final results obtained through bending flexibility tests. In conclusion, when designing the fabric structure design in 3D printing using SLS method through application of polyamide 12 material, the thickness of 1 mm presented the optimal condition in order to design a durable digital textile structure with flexibility and elasticity of the 3D printing result.

• Composites Research
• /
• 제35권4호
• /
• pp.269-276
• /
• 2022

본 연구에서는 층간분리의 위험이 없는 3차원 직조방식으로 복합재 보강패널을 제작하고 좌굴하중과 고유진동수 등의 기계적 특성을 연구하였다. 보강패널의 스트링거와 외피는 일체형으로 제작하였고 T800급 탄소섬유로 만들어진 프리폼에 수지(EP2400)를 충진시키는 방식을 적용하였다. 제작된 보강판에 대하여 압축시험과 고유진동수 측정 시험을 수행하였고 유한요소해석 결과와 비교하였다. 또한 3차원 직조 구조물의 성능을 상대적으로 비교하기 위해 일방향 프리프레그와 2차원 평직(fabric)으로 동일한 치수의 보강패널을 제작하여 시험과 해석을 수행하였다. 시험값을 기준으로 일방향 프리프레그와 2차원 평직으로 제작된 보강패널의 좌굴하중은 3차원 직조 패널의 좌굴하중 대비 각각 20%, -3%의 차이를 보였다. 본 연구로부터 3차원 직조방식으로 제작된 일체형 보강패널의 좌굴하중은 일방향 프리프레그 적층 보강판의 좌굴하중보다는 낮지만 2차원 평직 보강판넬보다는 미세하게 높은 수준의 값을 보임을 확인하였다.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2003년도 추계학술발표대회 논문집
• /
• pp.91-94
• /
• 2003

Laminated composites are liable to fatal damage under impact load due to the fact that they have no reinforcement in the thickness direction. To overcome the inherent weakness, three dimensional (3D) textile reinforcements have drawn much interests. In this paper, impact performance of 2D and 3D textile composites has been characterized. For 2D composites, fiber bundle size and fiber pattern have been varied. For 3D composites, orthogonal woven preforms of different density and type of through-thickness fibers have been studied. To assess the damage after the impact loading, specimens were subjected to C-scan nondestuctive inspection. Compression after impact (CAI) were also conducted in order to evaluate residual compressive strength.

• 한국의류학회지
• /
• 제38권3호
• /
• pp.347-354
• /
• 2014

The color appearance of a yarn-dyed woven fabric depends on the color of the yarn as well as on the weave structure. Predicting the final color appearance or formulating the recipe is a difficult task, considering the interference of colored yarns and structure variations. In a modern fabric design process, the intended color appearance is attained through a digital color methodology based on numerous color data and color mixing recipes (i.e., color prediction models, accumulated in CAD systems). For successful color reproduction, accurate color prediction models should be devised and equipped for the systems. In this study, the final colors of yarn-dyed woven fabrics were predicted using six geometric-color mixing models (i.e., simple K/S model, log K/S model, D-G model, S-N model, modified S-N model, and W-O model). The color differences between the measured and the predicted colors were calculated to evaluate the accuracy of various color models used for different weave structures. The log K/S model, D-G model, and W-O model were found to be more accurate in color prediction of the woven fabrics used. Among these three models, the W-O model was found to be the best one as it gave the least color difference between the measured and the predicted colors.

• Composites Research
• /
• 제34권2호
• /
• pp.96-100
• /
• 2021

The lightweight industry continuously demands reliable near-net-shape fabrication where the preform just out-of-machine is close to the final shape. In this study, different half-finished preforms are made π-beams. Then the preforms are unfolded to make a 3D shape with integrated structure of fibers, providing easier handling in the further processing of composites. Several 3D textile preforms are made using weaving technique and are examined after resin infusion for mechanical properties such as inter-laminar shear strength, compressive strength and tensile strength. Considering that the time and labor are important parameters in modern production, 3D weaving technique reduces the manufacturing steps and therefore the costs, such as hand-lay up of textile layers, cutting, and converting into preform shape. Hence this 3D weaving technique offers many possibilities for new applications with efficient composite production.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2005년도 춘계학술발표대회 논문집
• /
• pp.71-75
• /
• 2005

For the damage tolerance improvement of conventional laminated composites, stitching process have been utilized for providing through-thickness reinforcements. 2D preforms were stacked with S-2 glass plain weave and S-2 glass MWK (Multi-axial Warp Knit) L type. 3D preforms were fabricated using the stitching process. All composite samples were fabricated by RTM (Resin Transfer Molding) process. To examine the damage resistance performance the low speed drop weight impact test has been carried out. For the assessment of damage after the impact loading, specimens were examined by scanning image. CAI (Compressive After Impact) tests were also conducted to evaluate residual compressive strength. Compared with 2D composites, the damage area of 3D composites was reduced by 20-30% and the CAI strength showed 5-10% improvement.

• Composites Research
• /
• 제19권1호
• /
• pp.36-42
• /
• 2006

본 논문에서는 다중벽 탄소나노튜브가 첨가된 평직 유리섬유/에폭시 복합재료를 제작하여 전자기적 특성을 고찰하였다. 제작된 복합재료의 미세구조를 관찰하여 재료 내에 MWNT가 유리섬유 얀들의 계면과 모재과잉영역에 주로 분포되어 있음을 관찰하였다. 유전율은 X-band (8.2-12.4 GHz) 주파수 영역에서 측정되었으며, MWNT의 무게비가 증가할수록 증가하며 주파수에 대해서는 거의 일정하게 유지됨을 알 수 있었다 측정된 유전율을 이용하여 두께에 따른 탄소나노튜브가 첨가된 복합재료로 이루어진 전자파 흡수 구조의 반사손실 특성을 살펴보았으며, 제작된 복합재료를 이용하여 10dB 흡수 대역이 X-band전역이며 두께는 3.3mm인 흡수체를 구현할 수 있음을 확인하였다.