• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.7-7
• /
• 2000

This paper describes a mirror control system that can adjust the location of side and room mirror of the vehicle automatically using 3D coordinates to monitor the location of driver's eyes. Through analysis of the image inputted by two B/W CCD camera and infrared lamps installed on top of the driver's dashboard, we can estimate the values of 3D coordinate of the driver's eyes. Using these values, this system can determine the absolute position of each mirror and activate each actuator to the appropriate position. The stereo vision system can detect the driver's eyes whether it is day or night by virtue of infrared Lamps. We have tested this system using 10 drivers who drive a car currently, and most of the drivers were satisfied with the convenience of this system.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1991.10a
• /
• pp.376-376
• /
• 1991

• Proceedings of the IEEK Conference
• /
• 2003.07d
• /
• pp.1657-1660
• /
• 2003

7 This paper offer to the system for the hierarchical face plastic surgery using of 3D models. For the system, Make hierarchical plastic object of facial 3D models, and special appointment setting of plastic object. In order to give variaty to a scale, type, angle, position of plastic object that developed plastic surgery solution. It is possible to plastic surgery that harmonize with plastic objects, solution, vector by selected user.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.7
• /
• pp.1279-1284
• /
• 2008

In this paper, utilizing a haptic display for 3D modeling practice is proposed. A haptic display called PHANTOM Omni providing 3D position as well as touch feeling is used to investigate how effectively the proposed practice works compared to the conventional ones for 3D modeling. Experimental results showed the proposed practice can provide positive effect for 3D modeling: improving the task completion time and lowering task workload, thus increasing the usability.

• Journal of Advanced Navigation Technology
• /
• v.10 no.3
• /
• pp.226-234
• /
• 2006

Aids to Navigation is one of the most important facility for safety at sea. However, in terms of position there always exists discrepancy in inventory by media and/or organizational body who maintains the facility which may result in incredibility for navigator's position fixing or hazard avoidance. This paper suggests two major factors as the causes of the position error when they design, install and survey the aids to navigation. One is the function of direction of tide and water depth which makes swinging circle. The other is a variable value by time resulting from multiple coordination of satellites in contact. This paper aims to minimize inaccuracy by verifying its reason through numerical analysis over inherent position error.

• Science of Emotion and Sensibility
• /
• v.16 no.1
• /
• pp.29-42
• /
• 2013

In this paper, we analyze the effect of the depth perception, volume perception and visual discomfort according to the change of the quality of the depth image and the depth of the major object. For the analysis, a 2D image was converted to eighteen 3D images using depth images generated based on the different depth position of a major object and background, which were represented in three detail levels. The subjective test was carried out using eighteen 3D images so that the degrees of the depth perception, volume perception and visual discomfort recognized by the subjects were investigated according to the change in the depth position of the major object and the quality of depth map. The absolute depth position of a major object and the relative depth difference between background and the major object were adjusted in three levels, respectively. The details of the depth map was also represented in three levels. Experimental results showed that the quality of the depth image differently affected the depth perception, volume perception and visual discomfort according to the absolute and relative depth position of the major object. In the case of the cardboard depth image, it severely damaged the volume perception regardless of the depth position of the major object. Especially, the depth perception was also more severely deteriorated by the cardboard depth image as the major object was located inside the screen than outside the screen. Furthermore, the subjects did not felt the difference of the depth perception, volume perception and visual comport from the 3D images generated by the detail depth map and by the rough depth map. As a result, it was analyzed that the excessively detail depth map was not necessary for enhancement of the stereoscopic perception in the 2D-to-3D conversion.

• Journal of the Korean Chemical Society
• /
• v.38 no.8
• /
• pp.603-607
• /
• 1994

New cephalosporin antibiotics,7-[(3,4-dihydro-6-methoxycarbonyl-2,2-dimethyl-2H-1,4-thiazin-3-yl)acetamido]-3-[(substituted pyrimidin-2-yl)thiomethyl]-3-cephem-4-carboxylic acid derivatives(2a∼2d) were synthesized. These new cephalosporin derivatives were prepared by the introduction of pyridinylthiomethyl moiety in 3-position and thiazine group in 7-position of 7-ACA. Antibacterial activities of these compounds were examined and the relationship between structure and activities were studied. As the result, these compounds showed low antibacterial activities compared to cefotaxim used as control.

• Journal of Ubiquitous Convergence Technology
• /
• v.2 no.2
• /
• pp.67-77
• /
• 2008

Representation of various types of information in an interactive virtual reality environment on mobile devices had been an attractive and valuable research in this new era. Our main focus is presenting spatial indoor location sensing information in 3D perception in mind to replace the traditional 2D floor map using handheld PDA. Designation of 3D virtual reality by Virtual Reality Modeling Language (VRML) demonstrates its powerful ability in providing lots of useful positioning information for PDA user in real-time situation. Furthermore, by interpolating portal culling algorithm would reduce the 3D graphics rendering time on low power processing PDA significantly. By fully utilizing the CC2420 chipbased sensor nodes, wireless sensor network was established to locate user position based on Received Signal Strength Indication (RSSI) signals. Implementation of RSSI-based indoor tracking method is low-cost solution. However, due to signal diffraction, shadowing and multipath fading, high accuracy of sensing information is unable to obtain even though with sophisticated indoor estimation methods. Therefore, low complexity and flexible accuracy refinement algorithm was proposed to obtain high precision indoor sensing information. User indoor position is updated synchronously in virtual reality to real physical world. Moreover, assignment of magnetic compass could provide dynamic orientation information of user current viewpoint in real-time.

• Composites Research
• /
• v.34 no.2
• /
• pp.136-142
• /
• 2021

3D printing technology has the advantage of easy to make various shapes of products without a mold. However, it has a problem such as mechanical properties vary greatly depending on materials and manufacturing conditions. Thus, the need for research of 3D printing technology on ways to reduce manufacturing cost compared to physical properties is increasing. In this study, a 3D printing thermoplastic structure was fabricated using short fiber carbon fiber reinforced nylon filaments. And a method of improving mechanical properties was proposed by reinforcing the outer surface using pultruded continuous fiber-type carbon fiber or glass fiber-reinforced thermosetting composite material. It was confirmed that the bending properties were improved according to the reinforcing position of the stiffener and the type of fiber in the stiffener.

• Korean Journal of Radiology
• /
• v.22 no.5
• /
• pp.782-791
• /
• 2021

Objective: To evaluate the signal intensity of the periosteum using ultrashort echo time pulse sequence with three-dimensional cone trajectory (3D UTE) with or without fat suppression (FS) to distinguish from artifacts in porcine tibias. Materials and Methods: The periosteum and overlying soft tissue of three porcine lower legs were partially peeled away from the tibial cortex. Another porcine tibia was prepared as three segments: with an intact periosteum outer and inner layer, with an intact periosteum inner layer, and without periosteum. Axial T1 weighted sequence (T1 WI) and 3D UTE (FS) were performed. Another porcine tibia without periosteum was prepared and subjected to 3D UTE (FS) and T1 WI twice, with positional changes. Two radiologists analyzed images to reach a consensus. Results: The three periosteal tissues that were partially peeled away from the cortex showed a high signal in 3D UTE (FS) and low signal on T1 WI. 3D UTE (FS) showed a high signal around the cortical surface with an intact outer and inner periosteum, and subtle high signals, mainly around the upper cortical surfaces with the inner layer of the periosteum and without periosteum. T1 WI showed no signal around the cortical surfaces, regardless of the periosteum state. The porcine tibia without periosteum showed changes in the high signal area around the cortical surface as the position changed in 3D UTE (FS). No signal was detected around the cortical surface in T1 WI, regardless of the position change. Conclusion: The periosteum showed a high signal in 3D UTE and 3D UTE FS that overlapped with artifacts around the cortical bone.