• Composites Research
• /
• 제28권3호
• /
• pp.94-98
• /
• 2015

탄소섬유 에폭시 복합재료에 다양한 두께의 니켈 박막을 첨가한 복합재료를 제작하여 층간 계면 특성을 평가하고자 한다. 상온에서 스퍼터를 이용하여 니켈 박막을 프리프레그 위에 증착하고 이를 중간층으로 하여 복합재료를 제작하였다. 니켈 박막이 첨가된 탄소섬유 에폭시 복합재료는 니켈 박막 미첨가 탄소섬유 에폭시 복합재료에 비해 층간 전단 특성이 향상되었음을 확인하였다. 층간 파괴거동 분석을 위해 주사전자현미경으로 파단면을 관찰하였으며 니켈 박막이 복합재료 내에 층간 결합력을 높여 계면 특성을 향상시키며 전단시험 시 전단에너지를 흡수하는 역할을 한다는 것을 확인하였다.

• Carbon letters
• /
• 제20권
• /
• pp.39-46
• /
• 2016

In this work, the effects of maleic anhydride (MA) content on mechanical properties of chopped carbon fibers (CFs)-reinforced MA-grafted-polypropylene (MAPP) matrix composites. A direct oxyfluorination on CF surfaces was applied to increase the interfacial strength between the CFs and MAPP matrix. The mechanical properties of the CFs/MAPP composites are likely to be different in terms of MA content. Surface characteristics were observed by scanning electron microscope, Fourier transform infrared spectroscopy, and single fiber contact angle method. The mechanical properties of the composites were also measured by a critical stress intensity factor (K_IC). From the K_IC test results, the K_IC values were increased to a maximum value of 3.4 MPa with the 0.1 % of MA in the PP, and then decreased with higher MA content.

• Carbon letters
• /
• 제6권3호
• /
• pp.173-180
• /
• 2005

In this study, AR (aromatic resin) pitch was employed as the matrix-precursor for carbon/carbon composite because it exhibits much higher coke yield than coal tar pitch. As a result, a fabrication process of carbon/carbon composites can be shortened. It has been known that the pitches may cause swolling problem during the carbonization process. In order to restrain the swelling occurrence, a small quantity of carbon black was added to the AR pitch. Due to addition of carbon black the swelling was decreased largely and the perform can be infiltrated with the AR pitch. The densification efficiency of the performs was compared with various matrix-precursors. The coke yield of matrixprecursors, the morphology and the degree of graphitization of carbon matrix were analyzed.

• 한국세라믹학회지
• /
• 제44권7호
• /
• pp.349-353
• /
• 2007

2D SiC fiber-SiC (SiC/SiC) composites were fabricated via slurry infiltration and a stacking process. The effects of the additive composition and content in SiC slurries and the effect of the sintering time on the sintered density and strength of SiC/SiC composites were investigated. A slurry containing $Al_2O_3-Y_2O_3-MgO$ (AYM) additives led to a higher strength compared to a slurry containing $Al_2O_3-Y_2O_3-CaO$ (AYC) additives. The sintered density increased as the sintering time increased and showed a maximum (>98%) at 4 h. In contrast, the flexural strength increased as the sintering time increased and showed a maximum (615 MPa) at 6 h. The relative density and flexural strength increased as the additive content increased.

• 소성∙가공
• /
• 제32권1호
• /
• pp.28-34
• /
• 2023

In this research, a representative volume element (RVE)-based FE Model is presented to estimate the mechanical properties of additively manufactured continuous fiber-reinforced composites with different fiber orientations. To construct the model, an ABAQUS Python script has been implemented to produce matrix and fiber in the desired orientations at the RVE. A script has also been developed to apply the periodic boundary conditions to the RVE. Experimental tests were conducted to validate the numerical models. Tensile specimens with the fiber directions aligned in the 0, 45, and 90 degrees to the loading direction were manufactured using a continuous fiber 3D printer and tensile tests were performed in the three directions. Tensile tests were also simulated using the RVE models. The predicted Young's moduli compared well with the measurements: the Young's modulus prediction accuracy values were 83.73, 97.70, and 92.92 percent for the specimens in the 0, 45, and 90 degrees, respectively. The proposed method with periodic boundary conditions precisely evaluated the elastic properties of additively manufactured continuous fiber-reinforced composites with complex microstructures.

• 한국정보기술학회 영문논문지
• /
• 제9권1호
• /
• pp.89-102
• /
• 2019

Collagen can be used in building artificial skin replacements for treatment of burns and towards the reconstruction of bone as well as researching cell behavior and cellular interaction. The strength of collagen in connective tissue rests on the characteristics of collagen fibers. 3D confocal imaging of collagen fibers enables the characterization of their spatial distribution as related to their function. However, the image stacks acquired with confocal laser-scanning microscope does not clearly show the collagen architecture in 3D. Therefore, we developed a new method to reconstruct, visualize and characterize collagen fibers from fluorescence confocal images. First, we exploit the tensor voting framework to extract sparse reliable information about collagen structure in a 3D image and therefore denoise and filter the acquired image stack. We then propose to segment the collagen fibers by defining an energy term based on the Hessian matrix. This energy term is minimized by a min cut-max flow algorithm that allows adaptive regularization. We demonstrate the efficacy of our methods by visualizing reconstructed collagen from specific 3D image stack.

• 전자공학회논문지D
• /
• 제35D권3호
• /
• pp.70-81
• /
• 1998

Fiber-Fabry-Perot (FFP) tunable filters, the essential component of WDM transmission, were designed, fabricated and characterized. Multi-layered thin film mirrors that consists of an optical collimater's corss section as a substrate and TiO$_{2}$SiO$_{2}$ alternating multi-layered films as a filter wer designed by means of the transfer matrix method. Fabricated mirrors showed the high reflectivity over around 98% as expected. After fabricating the tuneable filters using PZT, we measured FSR, FWHM, finesse , crosstalk and insertion loss, confirming that the built devices satisfied the optical filter's specifications required in the SEDM transmission systems.

• Composites Research
• /
• 제31권5호
• /
• pp.192-201
• /
• 2018

3D 프린팅 기술의 활용은 복잡한 형상의 제품을 보다 손쉽게 생산 가능하게 하며, 시간적 경제적 이점을 제공함으로써 기존 제조업의 형태를 변화시킬 차세대 핵심 제조 기술로 부상하고 있다. 그러나 순수 고분자 소재 출력물의 기계적/전기적 특성 및 기능은 해당 기술의 확산에 있어 한계점으로 작용하였고, 이것은 고성능 고분자 복합재료 개발에 대한 수요로 이어졌다. 이에 본 논문에서는 고성능 3D 프린팅용 고분자 복합재료 개발의 최신 연구 동향을 소개하고, 응용 분야와 가능성 및 향후 연구방향에 대해 논하고자 한다.

• Design & Manufacturing
• /
• 제15권3호
• /
• pp.39-44
• /
• 2021

In molding of continuous fiber-reinforced thermoplastic composites, it is very difficult to impregnate between the reinforcements and the matrix since the matrix has a high melting temperature and high viscosity. Therefore, most of composite molding processes are divided in the manufacturing processes of intermediate materials called prepreg and the forming of products from intermediate materials. The divided process requires additional facilities and thermoforming, and they increase the cycle time and cost of composite products. These problems can be resolved by combining the continuous fiber-reinforced composite molding process with injection molding. However, when a composite material is manufactured by inserting woven fabric into the injection mold, poor impregnation occurs on the surface of the molded product. It affects the properties of the composites. In this paper, through an impregnation experiment using cores with different heat transfer rates and pore densities, the reason for the poor impregnation was confirmed, and molding experiments were conducted to produce composite with improved surface impregnation by inserting the mesh. And also, the surface impregnation and deformation of composites molded using different types of mesh were compared with each other.

• 한국광학회지
• /
• 제4권4호
• /
• pp.420-427
• /
• 1993

융착 접속 기술을 이용하여 다중모우드 광섬유와 단일 모우드 광섬유내에 유전체 박막 거울을 제작하였다. $45{\circ}$ 유전체 거울이 내장된 광섬유는 극소형이며, 광학적인 손실이 매우 작고(1.3 ${\mu}m$에서, 다중 모우드 광섬유의 경우 0.2dB, 단일 모우드 광섬유의 경우 0.5dB), 기계적 강도가 우수한 결합기로 사용될 수 있다. 반사율은 파장에 따라 변화하며, 편광에 매우 민감하였다. 백색광을 사용하여 유전체 거울로부터 반사되는 출력 파워를 원거리 스캔하며 측정하였을 때 출력 빔의 모양은 거의 원형 대칭으로써 최대 파워의 5%에서 측정된 종횡비는 1.09이었다. 다이오우드 레이저 광원을 사용하여 측정한 다중모우드 광섬유 결합기의 광분파율은 종래의 FBT(Fused Biconical Taper) 결합기보다 입력 광신호의 결합 조건에 따른 변화가 훨씬 적어서 사용하는 광통신 시스템의 모우드 잡음에 덜 민감하다. 광섬유 축에 수직하게 증착된 다층 유전체 거울들의 반사율 스펙트럼 특성을 측정하였으며, 행렬 해석법을 사용하여 실험 결과를 분석, 고찰하였다.