• 한국철도학회:학술대회논문집
• /
• 한국철도학회 1999년도 춘계학술대회 논문집
• /
• pp.151-158
• /
• 1999

In this study, we developed the simulation program of an overhead catenary-pantograph system, The overhead catenary is modeled with point mass and the pantograph is replaced with 3 d. o. f. model which is composed of mass, spring and damper. Using the developed program, we analyzed the static structure of the overhead catenary and the dynamic characteristics of an overhead catenary-pantograph system such as uplift displacement of contact wire and contact force. we compared the analysis results with the results of GASENDO software developed at RTRI in Japan. The behaviors of uplift displacement of contact wire and contact force were similar with the results of GASENDO software.

• 한국운동역학회지
• /
• 제13권2호
• /
• pp.89-100
• /
• 2003

In this research was to analyze 3-D kinematics variables for handspring of basic motion in the heavy gymnastics in order to investigate kinematical difference between expert and novice. Therefore, the purpose of this research was provide quantitative information, systematic provision, rules, establishment of basic skill for improving skill and teaching athletes. And in the research, results were as followings. 1. In the time variables, total time was that expert took 0.745sec and novice took 0.829sec, and as duration time of each event, expert was faster than novice in the all motion event except till second event of the preparation motion. 2. In the center of body variables, vertical direction variables, the displacement of body center hight was that expert showed 61.26% and novice showed 54.48% in the third event of all motion, also all event were showed expert was higher displacement than novice except first of event in preparatory stage. 3. In the angle displacement of main joint, the right direction was that expert showed 154.12degree and novice showed 174.85degree and the left direction was that expert showed 159.29degree and novice showed 171.46degree In the second event of main joint curved point at the same time hand was reached floor. In the angle displacement of knee joint in the third event of all motion, expert showed 155.25degree and novice showed 154.00degree In right, and expert showed 155.24degree and novice showed 154.55degree in left. In this result, both were same motion type. In the angle displacement of hip joint in the third event of the all motion, expert showed 142.80degree and novice showed 134.17degree in right, and expert showed 140.28degree and novice showed 144.94degree in left. In this result, motion pattern of expert was same both sides, but novice was different. According to the results, to increase efficiency of motion and aesthetic effect in the all motion, it should stretch displacement and height of body center and make similarly angle of right and left joint.

• Steel and Composite Structures
• /
• 제20권5호
• /
• pp.1133-1153
• /
• 2016

In this article, an additive performance ratio method using structural analysis of both 2D and 3D is introduced to mitigate the complexity of work evaluating structural performances of numerous steel outrigger alternatives in multi-story buildings, especially high-rise buildings. The combined structural analysis process enables to be the design of economic, safe, and as constructional demanding structures by exploiting the advantages of steel, namely: excellent energy dissipation and ductility. First the approach decides the alternative of numerous steel outriggers by a simple 2D analysis module and then the alternative is evaluated by 3D analysis module. Initial structural analyses of outrigger types are carried out through MIDAS Gen 2D modeling, approximately, and then the results appeal structural performance and lead to decide some alternative of outrigger types. ETABS 3D modeling is used with respect to realization and evaluation of exact structural behaviors. The approach reduces computational burden in compared to existing concepts such as full 3D analysis methods. The combined 2D and 3D tools are verified by cycle and displacement tests including comprehensive nonlinear dynamic simulations. The advantages and limitations of the Additive Performance Ratio Approach are highlighted in a case study on a high rise steel-composite building, which targets at designing the optimized alternative to the existing original outrigger for lateral load resisting system.

• 한국정밀공학회지
• /
• 제22권10호
• /
• pp.167-173
• /
• 2005

The Berkovich nano-indentation is an indentation test method analyzing mechanical properties of materials such as hardness and elastic modulus. The length scale of the penetration is measured in nanometers. Therefore, this method becomes widely useful for analyzing the mechanical property of thin film which can not be measured before. In this paper, comparing two results of the load-displacement curve obtained by the Berkovich nano-indentation and the 3-D finite element analysis, it was confirmed that the 3-D finite element analysis is useful. The phenomenon of pile-up and sink-in due to material properties was discussed by the finite element analysis.

• Bulletin of the Korean Chemical Society
• /
• 제29권7호
• /
• pp.1315-1319
• /
• 2008

A trisaccharide, 6d-Altro-Hepp$\alpha$ (1$\rightarrow$3) GlcNAc$\beta$ (1$\rightarrow$3) Gal$\alpha$ (1$\rightarrow$$OCH_2CH_2N_3$, as an O-antigenic repeating unit of Campylobacter jejuni serotypes O:23 and O:36, was synthesized. Coupling of the 6d-altro-Hepp$\alpha$ (1$\rightarrow$3) GlcNAc$\beta$ (1$\rightarrow$SEt donor with Gal$\alpha$ (1${\rightarrow}OCH_2CH_2Cl$ acceptor in the presence of NIS-TfOH promoter afforded the trisaccharide having the $\beta$ (1$\rightarrow$3) Gal linkage. $\beta$ -Stereospecificity and the desired regioselectivity for the 3-OH Gal are obtained. Subsequent hydrogenation, acetylation, azide displacement, hydrazinolysis, Nacetylation, and finally deacetylation furnished the title trisaccharide hapten for further glycoconjugation.

• 조명전기설비학회논문지
• /
• 제26권2호
• /
• pp.71-77
• /
• 2012

The cogging torque is important to the cut-in wind speed. And, it causes the acoustic noise and the vibration on the machine. This paper presents a 3D FEA(Finite Element Analysis) to evaluate the effect of magnet skew and stator displacement on cogging torque reduction, for double core AFPM(Axial Flux Permanent Magnet) generator. As a result, the magnet skew and the stator side displacement are proved excellent techniques to reduce the cogging torque.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 춘계학술대회논문집
• /
• pp.360-363
• /
• 2005

Biomimetic actuators composed of cellophane with an electrically conducting polyaniline(PANI) film have been fabricated and tested in air ambience conditions doped with two different counter ions such as perchlorate (${ClO_4}^-$) and tetrafluoroborate (${BF_4}^-$). Fabrication of the trilayer CP//CELLOPHANE//CP substantially enhanced the tip displacement (13.2mm) compared to the small displacement (8.3mm) of the bilaye. CP//CELLOPHANE. The ion migration among layers is the main factor behind the expansion of cellophane, while the expansion/contraction of PANI are dependent on the redox reaction of the polymer. The displacement of the composite is dominated by the humidity content. This implies that the actuation principle is possibly due to the assistance of water existing.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.1335-1342
• /
• 2005

In this paper, there is intended to introduce the new tunnel face shape, that is concave shaped face, and discusses its effects on the tunnel stabilization. Therefore, a comparative analysis in which the stability of a concave face was compared to that of a conventional plane face on the basis of displacement patterns in the tunnel face was conducted using a model test. In order to check and confirm displacement patterns on the concave face according to the radius of curvature as well as those around the face according to lateral pressure coefficient(k), two experimental concave models, produced at a scale of 1:2 and 1:5(tunnel radius), of the forefront of the curved area extended from plane face was built and tested.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.241-244
• /
• 1997

This paper proposes Electronic Speckle Pattern Interferometry(ESPI) for the quantitative buckling analysis of square tube, which is unable to be measured with previous methods. The quantitative buckling analysis in elasticity is important part to study strain-stress analysis of thick-plated tube and fatigue analysis. However, it is unsolved problem with theory and previous experimental method. The merits of ESPI, Whole-filed measurement and high accurate 3D-displacement measurement make it possible to determinate the buckling analysis in elasticity quantitatively.

• 한국공작기계학회논문집
• /
• 제13권1호
• /
• pp.81-87
• /
• 2004

A 3-D FEM (Finite Element Method) analysis of the turbo-blower shaft attached to a fuel cell was performed using Lanczos algorithm. The modal analysis was analyzed in order to investigate natural frequency and maximum displacement for 10 times. It was found that the first mode of natural frequency is 109.1Hz with the maximum displacement of 0.16mm while the tenth mode of natural frequency is 2464Hz with the maximum displacement of 0.25mm. Consequently, the results of modal analysis of the turbo-blower for a fuel cell system show good dynamic responses.