• 지구물리와물리탐사
• /
• 제10권4호
• /
• pp.275-284
• /
• 2007

MT 탐사 자료의 정확한 해석에 있어 중요한 지형효과를 연구하기 위해서, 언덕과 골짜기가 있는 3차원 모형에 대한 겉보기 비저항, 위상, 티퍼, induction vector, 임피던스 극도표 등을 분석하였다. 지형에 의해 왜곡되는 MT 반응을 계산하기 위해서 변유한요소법에 기초한 3차원 알고리듬을 이용하였다. 겉보기 비저항과 위상에서 지형효과는 전류의 왜곡이 주 원인이다. 티퍼의 크기는 언덕과 골짜기에서 동일하지만, 방향은 언덕에서는 중앙으로 골짜기에서는 바깥쪽으로 향했다. Induction vector의 실수성분은 언덕에서는 중앙부로 골짜기에서는 바깥쪽으로 향했으나 허수성분은 이와 반대이다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.89.1-89
• /
• 2001

Measurement of complex surfaces without touching is desirable in several fields. This arises mainly for measurement of complex surfaces including those surfaces that deform during touch. Our research presented in this paper describes the use of a 3D digitizer for scanning 3D objects. The use of such a device, in addition to proper calibration, requires proper scaling in all three dimensions. We propose measurement techniques to measure various aspects of the surface circumference, area and volume. We also present experiments from using a 3D Minolta digitizer for measuring 3D human heads.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 1997년도 춘계 학술발표회 논문집 Proceedings of EESK Conference-Fall 1997
• /
• pp.107-114
• /
• 1997

A dynamic fluid-structure-soil interaction analysis method is developed to investigate the effects of rocking motion on the seismic response of the 3-D flexible rectangular liquid storage tanks founded on the deformable ground. The governing equation of 3-D rectangular tanks subjected to the translational and rocking motions is obtained by Rayleigh-Ritz method. The dynamic stiffness matrix of the rigid surface foundation resting on the surface of a stratum are calculated by hyperelement method. The seismic responses of a 3-D flexible tank model founded on the deformable ground is calculated by combining the governing equation of the structural motion with the dynamic stiffness matrix of the rigid surface foundation.

• 대한치과보철학회지
• /
• 제35권2호
• /
• pp.385-399
• /
• 1997

The purpose of this experiment was to determine the effects of etching with a Nd : YAG Laser on dentin, or porcelain surface on the bond strength with composite resin. The dentin specimens were devided into the following 4 groups. D1 : No treatment D2 : Etched with 10% phosphoric acid D3 : Laser etchded with 1W, 20PPs D4 : Laser etched with 2W, 20PPS The procelain specimens were devided into the following 4 groups. P1 : diamond roughened P2 : etched with HF acid P3 : Laser etched with 2W, 20PPS P4 : Laser etched with 3W, 20PPS All specimens were veneered with resin. One half of the specimens were stored in $37^{\circ}C$ water for one day and the other half were thermocycled 1000 times at temperature of $5^{\circ}C\;to\;55^{\circ}C$ at 20 seconds intervals. After that, the bonding strength of composite resin to the dentin and porcelain was measured. The surface treated state and fractured state were observed with SEM. The following results were obtained. 1. In the dentin specimens, the bond strength of group D2 was highter than that of groups D1 and D3 in the case of the specimens stored in $37^{\circ}C$ water for one day, there was a statistically significant difference between group D2 and D1, D3 (P<0.05). The bonding strength of the specimens that were thermocycled decreased in the following order : group D2,D4,D3 and then D1. 2. In the porcelain specimens, the bonding strength of groups P1,P2 were higher than that of group P3 in the case of the specimens stored in $37^{\circ}C$ water for one day (P<0.05). The bonding strength of the specimens of being thermocycled decreased in the following order : group P2,P1,P4 and then P3. 3. The groups of high bond strength had a rougher surface and a high level of microporosity with SEM findings.

• Spatial Information Research
• /
• 제20권4호
• /
• pp.1-16
• /
• 2012

도시열섬 현상은 도심지의 가장 큰 환경문제로 대두되고 있으며, 이는 온도상승, 대기오염, 에너지 수요에 영향을 준다. 이러한 열섬현상에 대하여 많은 건물과 복잡한 공간적/입체적 패턴을 가진 지역의 경우에는 3차원 분석이 전적으로 수행되어야 한다. 본 연구는 2차원자료와 3차원 공간자료를 이용하여 도시열섬 인자를 파악함에 있다. 또한 공간 통계기법을 이용하여 열섬인자들의 공간적 영향력을 추출한다. 따라서, 도시온도의 예측, 3차원 모델의 생성, 도시인자의 추출, 일반회귀모형과 공간회귀모형의 구축을 통하여 본 연구를 수행한다. 결과적으로 3차원 도시인자와 인접한 공간영향력들이 도시열섬 현상에 미치는 효과는 크다는 것을 확인할 수 있다. 이를 바탕으로 도시온도 저감을 위한 정책수립에 방향을 효과적으로 제시할 수 있을 것이다.

• 대한기계학회논문집A
• /
• 제41권9호
• /
• pp.839-844
• /
• 2017

최근 3차원 프린팅 기술은 비약적으로 발전하여 쾌속조형기술의 대명사가 되고 있다. FDM 방식의 3D프린터는 쾌속조형에 사용되는 가장 일반적인 프린터이지만, 열에 취약하고, 출력물의 표면이 매끄럽지 못하는 등의 문제를 가지고 있다. 본 논문에서는 FDM방식의 3D프린터로 ABS재질의 시편을 제작하였고, 아세톤에 시편을 담그는 방식으로 후처리를 수행하였다. 공정시간을 변수로 후처리를 진행하였으며, 처음 5초의 후처리 시간동안에는 시편의 표면조도가 급격하게 개선되는 결과를 획득하였으며, 5초 이후에는 표면조도의 변화정도가 미미하였다. 또한, 이러한 후처리 공정은 적지만 시편의 인장강도와 파단변형률을 상승시키는 결과를 나타내었다.

• ETRI Journal
• /
• 제38권6호
• /
• pp.1085-1094
• /
• 2016

In this work, we present interactive automultiscopic content with mobile surface haptics for multimodal interaction. Our system consists of a 40-view automultiscopic display and a tablet supporting surface haptics in an immersive room. Animated graphics are projected onto the walls of the room. The 40-view automultiscopic display is placed at the center of the front wall. The haptic tablet is installed at the mobile station to enable the user to interact with the tablet. The 40-view real-time rendering and multiplexing technology is applied by establishing virtual cameras in the convergence layout. Surface haptics rendering is synchronized with three-dimensional (3D) objects on the display for real-time haptic interaction. We conduct an experiment to evaluate user experiences of the proposed system. The results demonstrate that the system's multimodal interaction provides positive user experiences of immersion, control, user interface intuitiveness, and 3D effects.

• 한국표면공학회지
• /
• 제40권3호
• /
• pp.138-143
• /
• 2007

The effects of texturing and anti-reflection coating on the reflection properties of multi-crystalline silicon solar cell have been investigated. The chemical solutions of alkaline and acidic etching solutions were used for texturing at the surface of multi-crystalline Si wafer. Experiments were performed with various temperature and time conditions in order to determine the optimized etching condition. Alkaline etching solution was found inadequate to the texturing of multi-crystalline Si due to its high reflectance of about 25%. The reflectance of Si wafer texturing with acidic etching solution showed a very low reflectance about 10%, which was attributed to the formation of homogeneous. Also, deposition of ITO anti-reflection coating reduced the reflectance of multi-crystalline si etched with acidic solution($HF+HNO_3$) to 2.6%.

• Journal of Welding and Joining
• /
• 제14권2호
• /
• pp.71-78
• /
• 1996

In order to rpovide proper SMT design criteria in a systematic way, a mathematical formulation has been developed to predict the configuration of the solder fillet formed between the gullwing type lead and rectangular pad. Effects of SMT design parameters such as the solder volume and pad dimension on the solder profile are investigated using the FEM that calculates the 3D configuration by minimizing the energy due to surface tension and gravity in the equilibrium state. Design criteria of QFP and SOP are illustrated by plotting the acceptable range of the solder volume with respect to the length and width ratios of the pad and lead. The results show that the acceptable design range increases with increase in the pad length and width. The pad length has more significant effects on design criteria compared with the pad width, and Bond number can be utilized to predict the joint quality.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• 제5B권3호
• /
• pp.238-242
• /
• 2005

In this paper, a surface permanent magnet motor made of the Soft Magnetic Composites (SMC) is analysed using the 3-D finite element method. By comparing with the motor made of the silicon steel sheets, the usefulness of the SMC for the eddy current loss is clarified quantitatively.