• Journal of Nutrition and Health
• /
• v.57 no.1
• /
• pp.43-52
• /
• 2024

Purpose: Cancer is the leading cause of death in Koreans, with breast cancer being the most common among women. Breast cancer readily metastasizes, and the existing treatment processes impose a significant burden on patients. This study examined whether pomegranate-derived exosome-like nanovesicles (PNVs) have anti-cancer effects by inhibiting cell infiltration and metastasis while increasing apoptosis on breast cancer MDA-MB-231 cells. Methods: Initially, exosome-like nanovesicles were isolated from pomegranate using ultracentrifugation. Subsequently, the size range of these nanovesicles was confirmed using nanoparticle tracking analysis. The ability of breast cancer MDA-MB-231 cells to internalize these natural nanovesicles was assessed with flourescence microscope. The anti-cancer effects of the PNVs were confirmed by applying various concentrations of PNVs (10, 50, 100 ㎍/mL) to MDA-MB-231 cells and systematically assessing their impact on cell viability and migration. Results: The round shape of the lipid bilayer in the PNVs was confirmed, providing crucial insights into their structural properties. We demonstrate that PNVs-associated DiD dye can be efficiently internalized by the MDA-MB-231 cells. The data showed that the PNVs inhibited cell viability, invasion rates, and migration in MDA-MB-231 cells. In addition, PNVs were absorbed into the MDA-MB-231 cells, leading to an increased expression of apoptosis proteins, such as cleaved caspase-3 and phosphorus-JNK, in a concentration-dependent manner. Furthermore, a reduction in cell infiltration and decreased expression of the transition markers MMP-2 and MMP-9 proteins were observed. Conclusion: For the first time, this study suggests that PNVs may be useful in the prevention or treatment of breast cancer by inhibiting the infiltration and metastasis of MDA-MB-231 cells and inducing apoptosis.

• Advances in aircraft and spacecraft science
• /
• v.11 no.1
• /
• pp.83-103
• /
• 2024

Adhesive bonding is currently widely used in many industrial fields, particularly in the aeronautics sector. Despite its advantages over mechanical joints such as riveting and welding, adhesive bonding is mostly used for secondary structures due to its low peel strength; especially if it is simultaneously exposed to temperature and humidity; and often presence of bonding defects. In fact, during joint preparation, several types of defects can be introduced into the adhesive layer such as air bubbles, cavities, or cracks, which induce stress concentrations potentially leading to premature failure. Indeed, the presence of defects in the adhesive joint has a significant effect on adhesive stresses, which emphasizes the need for a good surface treatment. The research in this field is aimed at minimizing the stresses in the adhesive joint at its free edges by geometric modifications of the ovelapping part and/or by changing the nature of the substrates. In this study, the finite element method is used to describe the mechanical behavior of bonded joints. Thus, a three-dimensional model is made to analyze the effect of defects in the adhesive joint at areas of high stress concentrations. The analysis consists of estimating the different stresses in an adhesive joint between two 2024-T3 aluminum plates. Two types of single lap joints(SLJ) were analyzed: a standard SLJ and another modified by removing 0.2 mm of material from the thickness of one plate along the overlap length, taking into account several factors such as the applied load, shape, size and position of the defect. The obtained results clearly show that the presence of a bonding defect significantly affects stresses in the adhesive joint, which become important if the joint is subjected to a higher applied load. On the other hand, the geometric modification made to the plate considerably reduces the various stresses in the adhesive joint even in the presence of a bonding defect.

• 한국석유지질학회:학술대회논문집
• /
• autumn
• /
• pp.63-65
• /
• 2001

The Chosen Supergroup (Cambro-Ordovician), mid-east Korea consists mainly of shallow marine carbonates and contains a variety of limestone conglomerates. These conglomerates largely comprise oligomictic, rounded lime-mudstone clasts of various size and shape (equant, oval, discoidal, tabular, and irregular) and dolomitic shale matrices. Most clasts are characterized by jigsaw-fit (mosaic), disorganized, or edgewise fabric and autoclastic lithology. Each conglomerate layer is commonly interbedded with limestone-dolomitic shale couplets and occasionally underlain by fractured limestone layer, capped by calcareous shale. According to composition, characteristic sedimentary structures, and fabric, limestone conglomerates in the Hwajol, Tumugol, Makkol, and Mungok formations of Chosen Supergroup can be classified into 4 types: (1) disorganized polymictic conglomerate (Cd), (2) horizontally stratified polymictic conglomerate (Cs), (3) mosaic conglomerate (Cm), and (4) disorganized/edgewise oligomictic conglomerate (Cd/e). These conglomerates are either depositional (Cd and Cs) or diagenetic (Cm and Cd/e) in origin. Depositional conglomerates are interpreted as storm deposits, tidal channel fills, or transgressive lag deposits. On the other hand, diagenetic conglomerates are not deposited by normal sedimentary processes, but formed by post-depositional diagenetic processes. Diagenetic conglomerates in the Chosen Supergroup are characterized by autoclastic and oligomictic lithology of lime-mudstone clasts, jigsaw-fit (mosaic) fabric, edgewise fabric, and a gradual transition from the underlying bed (Table 1). Autoclastic and oligomictic lithologies may be indicative of subsurface brecciation (fragmentation). Consolidation of lime-mudstone clasts pre-requisite for brecciation may result from dissolution and reprecipitation of CaCO3 by degradation of organic matter during burial. Jigsaw-fit fabric has been considered as evidence for in situ fragmentation. The edgewise fabric is most likely formed by expulsion of pore fluid during compaction. The lower boundary of intraformational conglomerates of depositional origin is commonly sharp and erosional. In contrast, diagenetic conglomerate layers mostly show a gradual transition from the underlying unit, which is indicative of progressive fragmentation upward (Fig. 1). The underlying fractured limestone layer also shows evidence for in situ fragmentation such as jigsaw-fit fabric and the same lithology as the overlying conglomerate layer (Fig, 1). Evidence from the conglomerate beds in the Chosen Supergroup suggests that diagenetic conglomerates are formed by in situ subsurface fragmentation of limestone layers and rounding of the fragments. In situ subsurface fragmentation may be primarily due to compaction, dewatering (upward-moving pore fluids), and dissolution, accompanying volume reduction. This process commonly occurs under the conditions of (1) alternating layers of carbonate-rich and carbonate-poor sediments and (B) early differential cementation of carbonate-rich layers. Differential cementation commonly takes place between alternating beds of carbonate-rich and clay-rich layers, because high carbonate content promotes cementation, whereas clay inhibits cementation. After deposition of alternating beds and differential cementation, with progressive burial, upward-moving pore fluid may raise pore-pressure in the upper part of limestone layers, due to commonly overlying impermeable shale layers (or beds). The high pore-pressure may reinforce propagation of fragmentation and cause upward-expulsion of pore fluid which probably produces edgewise fabric of tabular clasts. The fluidized flow then extends laterally, causing reorientation and further rounding of clasts. This process is analogous to that of autobrecciation, which can be analogously termed autoconglomeration. This is a fragmentation and rounding process whereby earlier semiconsolidated portions of limestone are incorporated into still fluid portions. The rounding may be due mainly to immiscibility and surface tension of lime-mud. The progressive rounding of the fragmented clasts probably results from grain attrition by fluidized flow. A synthetic study of limestone conglomerate beds in the Chosen Supergroup suggests that very small percent of the conglomerate layers are of depositional origin, whereas the rest, more than $80\%$, are of diagenetic origin. The common occurrence of diagenetic conglomerates warrants further study on limestone conglomerates elsewhere in the world.

• Journal of Wetlands Research
• /
• v.22 no.3
• /
• pp.194-199
• /
• 2020

Unlike in the past, the world is facing water shortages due to climate change and difficulties in simultaneously managing the risks of flooding. The Four Major Rivers project was carried out with the aim of realizing a powerful nation of water by managing water resources and fostering the water industry, and the construction period was relatively short compared to the unprecedented scale. Therefore, the prediction and analysis of how the river environment changes after the Four Major Rivers Project is insufficient. Currently, part of the construction section of the Four Major Rivers Project is caused by repeated erosion and sedimentation due to the effects of sandification caused by large dredging and flood-time reservoirs, and the head erosion of the tributaries occurs. In order to solve these problems, the riverbed maintenance work was installed, but it resulted in erosion of both sides of the river and the development of new approaches and techniques to keep the river bed stable, such as erosion and excessive sedimentation, is required. The water agent plays a role of securing a certain depth of water for the main stream by concentrating the flow so much in the center and preventing levee erosion by controlling the flow direction and flow velocity. In addition, Groyne products provide various ecological environments by forming a natural form of riverbeds by inducing local erosion and deposition in addition to the protection functions of the river bank and embankment. Therefore, after reviewing the method of determining the shape of the Groyne structure currently in use by utilizing the mobile limit flow rate and marginal reflux force, a new Critical Movement Velocity(${\bar{U}}_d$) and a new resistance coefficient formula considering the mathematical factors applicable to the actual domestic stream were developed and the measures applicable to Groyne installation were proposed.

• Journal of the Korean Institute of Gas
• /
• v.24 no.2
• /
• pp.1-8
• /
• 2020

Centrifugal pump is a facility that transfers energy to fluid through centrifugal force, which is usually generated by rotating the impeller at high speed, and is a major process facility used in many LNG production bases such as vaporization seawater pump, industrial water and fire extinguishing pump using seawater. to be. Currently, pumps in LNG plant sites are subject to operating conditions that vary depending on the amount of supply desired by the customer for a long period of time. Pumps in particular occupy a large part of the consumption strategy at the plant site, and if the optimum operation condition is not available, it can incur enormous energy loss in long term plant operation. In order to solve this problem, it is necessary to identify the performance deterioration factor through the flow analysis and the result analysis according to the fluctuations of the pump's operating conditions and to determine the optimal operation efficiency. In order to evaluate operation efficiency through experimental techniques, considerable time and cost are incurred, such as on-site operating conditions and manufacturing of experimental equipment. If the performance of the pump is not suitable for the site, and the performance of the pump needs to be reduced, a method of changing the rotation speed or using a special liquid containing high viscosity or solids is used. Especially, in order to prevent disruptions in the operation of LNG production bases, a technology is required to satisfy the required performance conditions by processing the existing impeller of the pump within a short time. Therefore, in this study, the rotation difference of the pump was applied to the ANSYS CFX program by applying the modified 3D modeling shape. In addition, the results obtained from the flow analysis and the curve fitting toolbox of the MATLAB program were analyzed numerically to verify the outer diameter correction theory.

• Korean Journal of Heritage: History & Science
• /
• v.54 no.4
• /
• pp.152-173
• /
• 2021

The Large Banner was introduced during the Japanese Invasions of Korea with a new military system. It was a flag that controlled the movement of soldiers in military training. In addition, it was used in other ways, such as a symbol when receiving a king in a military camp, a flag raised on the front of a royal procession, at the reception and dispatch of envoys, and at a local official's procession. The Large Banner was recognized as a symbol of military dignity and training rites. The Large Banner was analyzed in the present study in the context of two different types of decorations. Type I includes chungdogi, gakgi and moongi. Type II includes grand, medium, and small obangi, geumgogi and pyomigi. Each type is decorated differently for each purpose. The size of the flag is estimated to be a square of over 4 ja long in length. Flame edges were attached to one side and run up and down The Large Banner used the Five Direction Colors based on the traditional principles of Yin-Yang and Five Elements. The pattern of the Large Banner is largely distinguished by four. The pattern of large obangi consists of divine beasts symbolizing the Five Directions and a Taoism amulet letter. The pattern of medium obangi features spiritual generals that escort the Five Directions. The pattern of small obangi has the Eight Trigrams. The pattern of moongi consists of a tiger with wings that keeps a tight watch on the army's doors. As for historical sources of coloring for Large Banner production, the color-written copy named Gije, from the collection of the Osaka Prefect Library, was confirmed as the style of the Yongho Camp in the mid to late 18th century, and it was also used for this essay and visualization work. We used Cloud-patterned Satin Damask as the background material for Large Banner production, to reveal the dignity of the military. The size of the 4 ja flag was determined to be 170 cm long and 145 cm wide, and the 5 ja flag was 200 cm long and 175 cm wide. The conversion formula used for this work was Youngjochuck (1 ja =30cm). In addition, the order of hierarchy in the Flag of the King was discovered within all flags of the late Joseon Dynasty. In the above historical study, the two types of Large Banner were visualized. The visualization considered the size of the flag, the decoration of the flagpole, and the patterns described in this essay to restore them to their original shape laid out the 18th century relics on the background. By presenting color, size, material patterns, and auxiliary items together, it was possible not only to produce 3D content, but also to produce real products.

• The Korean Journal of Malacology
• /
• v.17 no.1
• /
• pp.35-44
• /
• 2001

This research was conducted to develop seedling production techniques in flat oyster, Ostrea dense lamellosa. The cultivation of larvae, artificial spat and spats collection in natural conditions rate were examined. In the mass culture tank (3 tons), average growth rates of the D Shape larvae of initial shell length (153.4 ㎛) and shell height (153.4 ㎛) were 202.6% and 212.9% at 16 days and 227.1%, 241.8% at 20 days, respectively. Instantaneous death and survival rate of the larvae were 0.160 and 54.8% at 16 days and 0.057 and 43.2% at 20 days, respectively. Collection rate of flat oyster from bottom using various collectors with oyster shell, scallop shell, ark shell and PVC plates were 32.9%, 24.1%, 16.8% and 10.0%, respectively. and the greatest collecting rate was 131.9 individuals/shell (32.9%) in laid collectors on the bottom. The collecting rate of the oyster larvae were better in laid collectors on the bottom 83.8 individuals/collection than in the suspended string 54.2 individuals/collection. in all collecting substrates. Early spats settled on collectors were grew to 2.38 $\pm$ 0.97 ㎜ in shell length and 2.16 $\pm$ 0.86 ㎜ In shell height at 26 days. The spats were grew to 28.58 $\pm$ 2.39 ㎜ in shell length and 31.65 $\pm$ 2.03 ㎜ in shell height during the 4 month mid-term cultivation. In the period of cultivation, the mean number of spats attached to collectors were 10.3 individuals at oyster shells, 5.8 scallop shells, 4.0 ark shells and 1.5 PVC plates, respectively.

• Journal of Animal Science and Technology
• /
• v.44 no.6
• /
• pp.643-652
• /
• 2002

Data were consisted of the ten body measurements (withers height, rump height, body length, chest depth, chest width, rump width, rump length, thurls width, hipbone width and chest girth) of 642 steers (Korean cattle), which was entered in the National Beef Quality Contest hosted by the Korea Animal Improvement Association from 1997 to 2001. A principal components analysis was used to classify the body types of the steers, and estimate the correlations between carcass traits and principal components for the body measurements of the first, second, third and fourth period, respectively. The first principal component of body measurements at the first, second, third and fourth period accounted for 76.0%, 83.0%, 72.7% and 57.4% of the total variance, respectively. The sum of first, second and third principal component at each period accounted for 86.69%, 90.49%, 84.62% and 77.26% of the total variance, respectively. At each period, all the first principal component of the body measurements were positive and it generally showed large framed body shape. The size of body was influenced mostly by chest depth(0.328${\sim}$0.339) and rump length(0.325${\sim}$0.341). The second, third and fourth principal component at the each period were various. There were positive correlations between principal components index of each period and carcass traits such as carcass weight(0.539${\sim}$0.755), average daily gain(0.256${\sim}$0.564), backfat thickness(0.227${\sim}$0.280), and eye muscle area(0.187${\sim}$0.344). The correlation with yield grade index(－0.246${\sim}$－0.110), however, was negative. The correlation with marbling score(0.066${\sim}$0.099) was low or statistically insignificant. According to principal component indexes of the second, third, and fourth components, the correlations with the carcass traits were various. There were no large differences between the correlations of the single body measurement trait with the carcass traits and the correlations of the first principal component indexes with the carcass traits.

• Korean journal of applied entomology
• /
• v.36 no.1
• /
• pp.67-72
• /
• 1997

To study the ecological characteristics of the mulberry longicorn beetle, Apriona germari Hope, Mulberry branches with egg-laid scar were regionally collected from ten mulberry fields during the hibernation. It showed that its distribution was highest in Kyunggi province with 3.05% and lowest in Kyungnam province with 0.28%. The number of the egg-laid scar per branch was single with 87.7% of high frequency and its average size was 2.38 L$\times$1.45 W$\times$0.34D cm. The average diameter of scarred branch was 1.7 cm, ranging from 1.3 to 1.9 cm. the shape of egg was long elliptical with width of $2.32\pm$0.33 mm and with length of $6.606.60\pm$0.55 mm. the weight of egg was $16.6\pm$2.94 mg and the color of the just-oviposited egg was milky white, changing into thick brown with time. The weight and length of the just-hatched larva was $16.6\pm$2.4 mg and $6.36\pm$0.66 mm. respectively. Most of the larvae moved downward inside the branch, showing that 94.2% of larvae for outdoor rearing and 87.9% of larvae for indoor rearing moved downward in the branch. As a result, it was found that it hibernated at egg stage with a higher rate than at larval stage by two or three folds in Kyunggi and Kyungbuk province and contrarily at larval stage with higher rate than at egg stage in Chunbuk, Chunnam and Kyungnam provinces. The survival rate for the egg after hibernation was significantly low with 6.6% and contrarily for the larva after hibernation remarkably high with 91.2%. Although the survival rate of the egg in this survey was relatively low, the result indicated that there were two types of hibernation of A. germari in Korea; egg and larval stage.

• Korean Journal of Ichthyology
• /
• v.11 no.1
• /
• pp.94-101
• /
• 1999

This study was conducted to observe the early life history of sea bass, Lateolabrax japonicus. The fertilized eggs were spherical in shape and turned out to be separative and floated. Their membrane and yolk having 1~5 oil globule were transparent. Fertilized eggs were measured to be 1.33~1.46 mm in diameter. Hatching of eggs were started at 74 hrs 15 mins, 54 hrs 55 mins, 50 hrs 45 mins, after fertilization in water temperature $16.0^{\circ}C$, $18.0^{\circ}C$, $20.0^{\circ}C$ respectively. The newly hatching larvae were 3.79~3.97 mm in total length with 35~37 myomeres, and mouth and anus were closed. Melanophores were distributed on the up side of head, upper jaw and margins of the body. The 5 days after hatching larvae measured 4.78~5.24 mm in total length, yolk were completely absorbed, and transformed to postlarval stage. In this time, mouth of larvae was opened, and also melanophores were presented on the lower jaw. Head of larvae grew remarkably. The 21~22 days after hatching, total length of the larvae was 7.15~8.12 mm, the caudal fin rays began to differentiation. In 31 days after hatching, the larva were 8.46~9.16 mm in total length, and tip of the caudal notochord flexed $45^{\circ}$. The larvae reached to the juvenile stage with all the fins were developed at 61 days after hatching and attained 16.28~17.31 mm in total length.