• Journal of Construction Engineering and Project Management
• /
• 제7권1호
• /
• pp.37-49
• /
• 2017

The Jinshanling section of the Great Wall of China is a series of fortifications in northern China that was constructed for strategic military defenses. This section was first built in the beginning of the Ming Dynasty in AD 1368 and then underwent major construction, reconstruction and renovation during the late Ming Dynasty, approximately in AD 1569. The Jinshanling section is 10.5 km long, a very short section compared with the entire 21,200 km wall. The wall section is located in Luanping County, Hebei province, China. This research paper focuses on the construction methods and materials of the wall and the towers in the area. The research methodology includes site visits, knowledge acquisition of experts and 3D graphic modeling. This study reveals that the materials selected for the structure include rubbles and rammed earth, bricks, stones, timber, and mortar. The erection sequence of the wall and the towers was a bottom-up fashion using various ancient construction techniques, such as the fire-setting rock blasting techniques and the surveying techniques from the Sea Island Mathematical Manual.

• Earthquakes and Structures
• /
• 제13권3호
• /
• pp.323-335
• /
• 2017

A simplified framework for the probabilistic estimation of economic losses induced by the structural vulnerability in single-story and single-bay precast industrial buildings is presented. The simplifications introduced in the framework are oriented to the definition of an expeditious procedure adoptable by government agencies and insurance companies for preliminary risk assessment. The economic losses are evaluated considering seismic hazard, structural response, damage resulting from the structural vulnerability and only structural-vulnerability-induced e]conomic losses, i.e., structural repair or reconstruction costs (stock and flow costs) and content losses induced by structural collapse. The uncertainties associated with each step are accounted for via Monte Carlo simulations. The estimation results in a probabilistic description of the seismic risk of portal-like industrial buildings, expressed in terms of economic losses for each occurrence (i.e., seismic event) that owners (i.e., insured) and stakeholders can use to make risk management decisions. The outcome may also be useful for the definition of the insurance premiums and the evaluation of the risks and costs for the owner corresponding to the insurance industrial costs. A prototype of a precast concrete industrial building located in Mirandola, Italy, hit by the 2012 Emilia earthquake, is used as an example of the application of the procedure.

• 대한공간정보학회지
• /
• 제23권1호
• /
• pp.123-128
• /
• 2015

본 논문에서는 CCTV 영상으로 조밀한 3차원 복원을 하기 위하여 스테레오 정합 과정으로 얻어지는 정합점을 증가시키기 위한 실험을 진행하였다. 실험에서는 시간의 경과에 따라 연속적으로 촬영된 스테레오 CCTV 영상에서 시계열별로 단영상을 추출한 뒤, SIFT 정합 알고리즘과 RANSAC 알고리즘을 적용하여 얻어진 정합점을 순차적으로 중첩하였으며, 결과적으로 정합점의 중첩과정이 반복될수록 정합점 수가 계속해서 증가하는 것을 확인할 수 있었다.

• 대한기관식도과학회지
• /
• 제16권2호
• /
• pp.138-144
• /
• 2010

Background: Tracheal deviations are encountered frequently in head and neck tumors especially in thyroid cancer. Dyspnea and stridor are symptom calling for surgery. The method of evaluation in tracheal deviation is not well established yet. This paper is aimed to suggest objective tools to evaluate tracheal deviation in relation to cervical vertebra. Material and Method: Ten cases of thyroid cancers were recruited retrospectively. Tracheal inner shadow and shape of cervical vertebra were reconstructed three dimensionally using 3D-doctor to compare position of trachea in relation to vertebral body. Extent of deviation was scored in relation to both lateral borders of vertebral body. Angles between trachea and spinous process were measured in axial CT and compared between study group and control group. Results: Deviation scores were statistically significant between study group (mean=1.1) and control group (mean=0) (p=0.0008). Deviation angles at maximal tumor size in study group (mean=160.3 Degrees) and deviation angles of control group (mean=177.1 Degrees) were statistically significant (p=0.0007). Angles at maximal deviation of three dimensional images ages in study group (mean=162.6 Degrees) and deviation angles of control group (mean=177.1 Degrees) were statistically significant (p=0.0089). Conclusion: Tracheal deviation can be evaluated using scoring of three dimensional images and measuring angle between trachea and vertebral spine.

• 전기학회논문지
• /
• 제63권1호
• /
• pp.145-149
• /
• 2014

In this study, using X-ray cargo container scanning device and to differentiate the concept of three-dimensional information extraction applied for X-ray scanning device as an ingredient in the rotation of the X-Ray Linear Pushbroom Stereo System by introducing the geometric How to model was introduced. Three-dimensional information obtained through the matching of a single voxel space filled with a random vector operations for each voxel in the three dimensional shape reconstruction algorithm using the definition, and in time, the time required for each step were analyzed. Using OpenCV in each step by applying parallelization techniques approximately 1.8 times improvement in the processing time of the check, but do not meet the target within one minute levels. The other hand, X-ray images by the primary process to convert the point View the results of real-time stereo through a three-dimensional could feel the comfort level.

• Journal of Electrical Engineering and Technology
• /
• 제13권3호
• /
• pp.1156-1165
• /
• 2018

This paper presents a detailed realization of direct torque controlled induction motor drive for elevator applications. The drive is controlled according to the well-known space vector modulated direct control scheme (SVM-DTC). As the elevator drives are usually equipped with speed sensors, flux estimation is carried out using a current model where two stator currents are measured and accurate instantaneous rotor speed measurement is used to overcome the need for measuring stator voltages. Speed profiling for a comfortable elevator ride and other supervisory control activities to provide smooth operation are also explained. The drive performance is examined and controllers' parameters are fine-tuned using MATLAB/SIMULINK. The blocks used for flux and torque estimation and control in the offline simulation are compiled for real-time using dSPACE Microlabox. The performance of the drive has been verified experimentally. The results show good performance under transient and steady state conditions.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.1424-1426
• /
• 2003

It will be a real good news for the people who were lost their hometown by the construction of a large dam to be restored to the former state. Focused on Cheung-Pyung around where most part were flooded by the Chungju large Dam founded in early 1980s, we used Remote Sensing Technique in this study in order to restore topographical features before the flood with 3 dimensional effects. We gathered comparatively good satellite photos and remotely sensed digital images, then we made a new color image from these and the topographical map which had been made before the flood. This task was putting together two kinds of different timed images. And then, we generated DEM including the outskirts of that area as harmonizing current contour lines with the map. That could be a perfect 3D image of Cheung-Pyung around before when it had been flood by making perspective images from all directions, north, south, east and west, for showing there in three dimensions. Also, flying simulation we made for close visiting can bring us to experience their real space at that time.

• 한국수학교육학회지시리즈D:수학교육연구
• /
• 제26권3호
• /
• pp.253-270
• /
• 2023

This study aims to investigate the extent to which Korean high school textbooks incorporate opportunities for students to engage in the mathematical modeling process through tasks related to exponential and logarithmic functions. The tasks in three textbooks were analyzed based on the actions required for each stage in the mathematical modeling process, which includes identifying essential variables, formulating models, performing operations, interpreting results, and validating the outcomes. The study identified 324 units across the three textbooks, and the reliability coefficient was 0.869, indicating a high level of agreement in the coding process. The analysis revealed that the distribution of tasks requiring engagement in each of the five stages was similar in all three textbooks, reflecting the 2015 revised curriculum and national curriculum system. Among the 324 analyzed tasks, the highest proportion of the units required performing operations found in the mathematical modeling process. The findings suggest a need to include high-quality tasks that allow students to experience the entire process of mathematical modeling and to acknowledge the limitations of textbooks in providing appropriate opportunities for mathematical modeling with a heavy emphasis on performing operations. These results provide implications for the development of mathematical modeling activities and the reconstruction of textbook tasks in school mathematics, emphasizing the need to enhance opportunities for students to engage in mathematical modeling tasks and for teachers to provide support for students in the tasks.

• 한국정보과학회논문지:소프트웨어및응용
• /
• 제27권1호
• /
• pp.50-61
• /
• 2000

최근 원추곡선에 기반한 스테레오 비젼에 대한 연구가 주목을 받고 있는데, 이는 원추곡선이 행렬표현, 대응관계설정의 용이성, 그리고 실세계에서 쉽게 찾을 수 있다는 좋은 성질을 갖는다는 점에서 당연한 현상이라 여겨진다. 하지만, 일반적인 고차의 대수곡선에 대한 확장은 아직 성공적으로 이루어지지 못하고 있는 실정이다. 기약인 대수곡선 (irreducible algebraic curve)은 실세계에서 많지 않지만, 직선과 원추곡선은 무수히 많고, 따라서 이들의 곱으로 주어지는 높은 차수의 대수곡선도 무수히 많다. 본고에서는 2이상의 임의의 차수를 가지는 대수곡선을 calibration된 두 대의 카메라를 가지고 스테레오 문제를 푼다. 대응관계설정과 복원, 두 가지 문제 모두에 대한 closed form solution을 제시한다. $f_1,\;f_2,\;{\pi}$를 각각 두 이미지 곡선, 공간상의 평면이라 하고, $VC_P(g)$를 평면곡선 g와 점 P로 만들어지는 원추곡선이라 하면, $VC_{O1}(f_1)\;=\;VC_{O1}(VC_{O2}(f_2)\;∩\;{\pi})$ 의 관계를 이용하여 미지수인 평면 ${\pi}$의 계수들, $d_1,\;d_2,\;d_3$에 대한 다항 방정식들을 얻을 수 있다. 약간의 변형을 통하여 $d_1$에 대한 다항 방정식을 얻을 수 있고, 이 방정식의 유일한 양수해는 나머지 과정에서 매우 중요한 역할을 한다. 그 이후에는 $O(n^2)$개의 일변수 다항식에 대한 계산만으로 모든 스테레오 문제를 해결한다. 이는 과거의 여러 개의 다변수 다항식의 공통근을 구해야 했던 방법에 비교된다. synthetic 데이터와 실제 이미지에 대한 실험은 우리의 알고리듬이 옳음을 보여준다.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제35권4호
• /
• pp.229-239
• /
• 2009

The purpose of this study is to evaluate the change in condylar position, width, and angle before and after orthognathic surgery using 3-dimensional computed tomograph. Pre and posterative 3-D CT was taken on 38 patients and through axial, frontal, sagittal measurements and by 3-dimensional reconstruction, the changes in condylar postion, mandibular width and angle were analyzed and others such as the difference in gender, operation and fixation method, setback length and in relation with temporomandibular disorders were done together too. The results were as follows: The inward rotation of condyle in axial condylar angle, the forward movement of right condyle in sagittal anterior-posterior distance, the superior movement of both condyles in sagittal superior-inferior distance, the decrease in gonial angle, the increase in mandibular width, the decrease in distance between the axial coronoid process distance and the increase in the frontal intercondylar distance were statistically significant. There were no statistically significant changes in gender difference, however in the difference in operation method, change in the gonial angle was observed and there was more change in bilateral sagittal split osteotomy group compared to two-jaw surgery group. In the difference in fixation method, the decrease in axial coronoid process distance and the change in sagittal anterior-posterior distance were statistically significant. In the difference in setback, the increase in setback didn't relate directly with the increased change in condyle position. In the relation with temporomandibular disorder, changes in left axial condylar angle and axial coronoid process distance were statistically significant. Changes in condylar position could be observed after the orthognathic surgery but it doesn't seem to have much of a clinical importance. The orthognathic surgery is effective in decreasing the mandibular angle, and it is not related with the temporomandibular disorder.