• 한국재료학회지
• /
• 제23권8호
• /
• pp.447-452
• /
• 2013

Recently, products that a have 3-dimensional(3D) micro structure have been in wide use. To fabricate these 3D micro structures, several methods, such as stereo lithography, reflow process, and diffuser lithography, have been used. However, these methods are either very complicated, have limitations in terms of patterns dimensions or need expensive components. To overcome these limitations, we fabricated various 3D micro structures in one step using a pair of diffusers that diffract the incident beam of UV light at wide angles. In the experiment, we used positive photoresist to coat the Si substrate. A pair of diffusers(ground glass diffuser, opal glass diffuser) with Gaussian and Lambertian scattering was placed above the photomask in the passage of UV light in the photolithography equipment. The incident rays of UV light diffracted twice at wider angles while passing through the diffusers. After exposure, the photoresist was developed fabricating the desired 3D micro structure. These micro structures were analyzed using FE-SEM and 3D-profiler data. As a result, this dual diffuser lithography(DDL) technique enabled us to fabricate various microstructures with different dimensions by just changing the combination of diffusers, making this technology an efficient alternative to other complex techniques.

• 한국광학회지
• /
• 제28권5호
• /
• pp.213-220
• /
• 2017

3D 프린터와 반도체 레이저를 사용하여 정렬하기 쉽고 저렴한 교육용 마흐젠더 간섭계를 제작하는 방법을 제안하였다. 간섭계는 $165mm{\times}120mm{\times}57mm$ 크기의 몸체, 거울 마운트, 레이저 홀더, 광분할기 등으로 구성된다. 레이저 경로는 고무 밴드, 작은 금속 막대 및 나사로 구성된 4개의 거울 마운트로 조정하였다. 간섭무늬는 최종 단계에서 렌즈에 의해 확대되었다. 슬라이드 글라스의 굴절률은 간섭계 팔 중 하나에 삽입된 슬라이드 글라스가 회전하는 동안 이동하는 간섭무늬의 수를 계수함으로써 측정되었다. 굴절률을 구하는 식을 광경로차와 회전 각도의 함수로 찾았으며, 간섭계 실험에서 유리의 굴절률을 계산하는데 사용하였다. 간섭계의 한 팔에서 유리를 회전시키면 교실에서 움직이는 간섭무늬를 관찰하기 위해 고가이지만 사용되었던 정밀 스테이지가 필요 없게 된다. 따라서 이 논문에서 제안 된 3차원 프린터로 제작한 마흐젠더 간섭계는 경제성과 성능 때문에 교육에 매우 유용할 것으로 기대된다. 학생들이 3차원 프린터로 제작한 간섭계를 사용하여 유리의 굴절률과 빛의 파장을 측정하는 등의 정성적 및 정량적 연구를 수행 할 수 있을 것이다.

• 한국재료학회지
• /
• 제32권12호
• /
• pp.560-564
• /
• 2022

In this study, lanthanum boron silicate glasses were prepared with a composition of x Li₂O-(60-x)B₂O₃-5CaO-5BaO-7ZnO-10SiO₂-10La₂O₃-3Y₂O₃ where x = 1,3,5,7, and 9 mol%. Each composition was melted in a platinum crucible under atmospheric conditions at 1,400 ℃ for 2 h. Clear glasses with a transmittance exceeding 85 % were fabricated. Their optical, thermal, and physical properties, such as refractive index, Abbe number, density, glass transition (T_g) and Knoop hardness were studied. The results demonstrated that refractive index was between 1.6859 and 1.6953 at 589.3 nm. The Abbe number was calculated using an equation for 589.3 nm (nd), 656.3 nm (nf) and 486.1 nm (nc) and was observed to be in the range from 57.5 to 62.6. As the Li₂O content increased, the glass transition temperature of the optical glass decreased from 608 ℃ to 564 ℃. If glass mold pressing is performed using a material with a low transition temperature and high mechanical strength, then the optical glasses developed in this study can be completely commercialized.

• 한국전자파학회논문지
• /
• 제20권3호
• /
• pp.230-239
• /
• 2009

본 논문에서는 FM 라디오 수신을 위한 RV 차량용 글래스 안테나를 개발하였다. 형상이 간단하면서도 주어진 유리 면적을 효율적으로 이용하여 광대역 정합에 유리하고 높은 수직 편파 이득을 보이는 다중 루프 구조를 사용하였다. 또한, 상용 RV 차량에 장착 시 시야 확보 비율을 높이기 위해서 선로에 유기되는 전류 분포를 기반으로 선로 두께를 조절하여 안테나의 투명도를 향상시켰다. 제안된 안테나는 상용 RV 차량 쿼터 유리에 인쇄하였으며, 반사 손실과 이득 등의 안테나 성능을 반무반사실에서 측정하였다. 제안된 글래스 안테나는 FM 라디오 주파수 대역(80$\sim$110 MHz)에서 안테나 전방향(bore-sight direction: $\theta=90^{\circ}$, $\phi=270^{\circ}$) 평균 이득이 -9.67 dBi로 상용 모노폴 글래스 안테나의 평균 이득 -12.49 dBi와 천장 부착용 마이크로 안테나의 평균 복사 이득 -19.24 dBi 보다 높은 이득을 보였다.

• 한국세라믹학회지
• /
• 제53권2호
• /
• pp.258-262
• /
• 2016

The effect of zirconium dioxide ($ZrO_2$) on the properties of color conversion glasses was examined in the $BaO-ZnO-B_2O_3-SiO_2$ system. The difference in refractive index between glass and phosphor affect the optical properties of the color conversion glass because of light scattering. Reducing the difference in refractive index is a method to improve the luminous efficacy of color conversion glasses. As a reference, a type of glass that contains 25 mol% of each component was used. To increase the refractive index of the glass samples, the BaO content was increased from 25 to 40 mol%, and $ZrO_2$ was added at levels of 1, 3, and 5 mol%. Color conversion glasses were prepared by sintering a mixture of glass and 5 wt% $YAG:Ce^{3+}$ phosphor. As a result, the refractive index of the glass was found to be dependent on the BaO and $ZrO_2$ contents in the BaO-ZnO-$B_2O_3-SiO_2$ system. As the BaO and $ZrO_2$ contents were increased, the luminous efficacy of the color conversion glass was improved because the refractive index difference between the glass and the $YAG:Ce^{3+}$ phosphor decreased.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2005년도 추계학술발표대회 논문집
• /
• pp.31-34
• /
• 2005

For the damage tolerance improvement of conventional laminated composites, stitching process has been utilized for providing through-thickness reinforcements. 2D prefonl1S were stacked with S-2 glass plain weave, and 3D preforms were fabricated using the stitching process. For the matrix system, epoxy and phenol resins were considered. To examine the damage resistance performance the low velocity drop weight impact test has been carried out, and the impact damage was examined by scanning image. CAI (Compressive After Ih1paet) tests were also conducted to evaluate residual compressive strength. Compared with 2D epoxy composites, 2D phenol composites showed drastic reduction in the compressive strength prior to impact because of the higher contents of voids. The damage area of 2D phenol composites were also larger than that of 2D epoxy composites. However, by introducing the stitching, the damage area of 3D phenol composites was reduced by 60%, while the CAI strength improvement was negligible.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 추계학술대회 논문집 학회본부 C
• /
• pp.1120-1122
• /
• 1999

In the design of vehicle glass antenna system, it is essential to use preamplifier between the glass antenna and the TV set, since glass antenna has low gain. In this paper, the preamplifier has been designed in the frequency range from 50MHz to 900MHz with the gam of 10dB. A negative feedback technique has been employed for the wideband characteristics of the amplifler. A DC block capacitor is also used to obtain flat gain response in the wide frequency range. The experimental result shows 1dB ripple in 9dB gain and 0.5dB ripple in 3dB noise figure. The test results were compared with those of the performed by the EEsof-touchstone.

• 헤리티지:역사와 과학
• /
• 제36권
• /
• pp.241-266
• /
• 2003

Glass pieces excavated from Mireuksa Temple dated $7^{th}$ century A.D. were characterized by chemical composition, specific gravity and melting point. Lead isotope ratios of lead glasses were also compared with those of lead ore to attribute which lead ore was delivered for making lead glass. It was known that some lead glasses found in Japan were similar with those of Mireuksa Temple as comparing the data of chemical composition and lead isotope ratios. Characteristics of lead glass from Mireuksa Temple Thirty five glass pieces of Mireuksa Temple were analyzed for five oxides and found that all was lead glass system(PbO-$SiO_2$) with the range of 70~79% for PbO and 20~28% for $SiO_2$. The concentrations of oxides such as $Al_2O_3$, $Fe_2O_3$ and CuO were below 0.4%, 0.3% and 0.9%, respectively. Principal component analysis(PCA) as a statistical method was carried out to classify glasses with the similarities of chemical concentrations. The result of PCA has shown that three groups of glasses were created according to the excavation positions and two major oxides(PbO and $SiO_2$) greatly contributed to the dispersion of glasses on principal component 1(PC1) axis and trace element oxides($Al_2O_3$ and $Fe_2O_3$) for PC2 axis. Most of lead glasses were greenish by the efficacy of iron and copper oxides and some showed yellowish-green. The gravity of lead glasses was about 4.4~5.4 and estimated melting point was near $670^{\circ}C$. Lead isotope ratios of glasses were analyzed and found quite close to a lead ore from the Bupyeong mine in Gyeonggi-do. Comparison with lead glasses found in Japan Lead glasses of Mireuksa Temple were compared with those of Japan on the basis of chemical and physical data. Chemical compositions of Japanese lead glasses dated $7^{th}{\sim}8^{th}$ century A.D. were nearly similar with those of Mireuksa Temple but lead isotope ratios of those were separated into two groups. Three distribution maps of lead ores of Korea, Japan and China with lead isotope ratios were applied for lead glasses found in Japan. The result have shown that the locations of lead glasses from Fukuoka Prefecture coincided with the region of northen part of Korea and similar with those of Mireuksa Temple and lead glasses from Nara Prefecture dated $8^{th}$ century A.D. were located in the region of Japanese lead ore. This research has demonstrated that lead glasses of Mireuksa Temple conveyed to Miyajidake site, Fukuoka Prefecture around $7^{th}$ century A.D. and glass melting pots and glass beads excavated from Nara Prefecture confirmed the first use of Japanese lead ore for production of lead glasses from the end of $7^{th}$ century A.D.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.119-123
• /
• 2004

This paper describes low temperature poly-Si (LTPS) TFT system on glass (SOG) technology developed in NEC. High resolution SOG-LCDs such as a 230 ppi reflective type LCD, a 2.5", 333 ppi 2D/3D autostereoscopic LCD, and a 2.1" single voltage driven full integration LCD for mobile applications and a 0.9", XGA light valve for projectors are reviewed from the perspective of the high resolution technologies

• 한국군사과학기술학회지
• /
• 제21권3호
• /
• pp.295-305
• /
• 2018

We present a passively Q-switched monolithic Er:Yb:glass microchip laser developed in our lab. The microchip laser can produce pulses at 1535 nm of the 'eye-safe' wavelengths with the pulse energy of 50 uJ and the pulse width of 4-6 ns. Using the laser we also designed and developed a pulsed Er:Yb:glass microchip laser rangefinder. Expressions for background and signal power, noise, and signal-to-noise ratio are reviewed. A computer simulation was used to optimize laser power, receiver aperture, and preamplifier bandwidth for the efficient system design of the laser rangefinder. Experimental results are presented to compare with the theory.