• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.10 no.4
• /
• pp.23-28
• /
• 2010

Recently, as the number of people using Smartphones increased, several researches has been launched basing it's subject on this issue. In this circumstance, the fusion of sensor technologies and Smartphone offers a variety of functions. The system introduced in the current paper uses a controller which extracts information about accelerating movements of an user. This information is then sent to the Smartphone through Bluetooth communication. The input method proposed in this paper differs from the existing methods such as touch typing or button input in Smartphones. It rather uses the 3-D acceleration sensor which enables users to control their Smartphone anywhere and anytime without directly touching the device. Furthermore, because it is developed for various applications, it can be applied in many different fields.

• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.2
• /
• pp.133-140
• /
• 2008

In this paper, a small and effective attitude estimation system for a humanoid robot was developed. Four small inertial sensors were packed and used for inertial measurements(3D accelerometer and three 1D gyroscopes.) An effective 3D pose estimation algorithm for low cost DSP using an extended Kalman filter was developed and evaluated. The 3D pose estimation algorithm has a very simple structure composed by 3 modules of a linear acceleration estimator, an external acceleration detector and an pseudo-accelerometer output estimator. The algorithm also has an effective switching structure based on probability and simple feedback loop for the extended Kalman filter. A special test equipment using linear motor for the testing of the 3D pose sensor was developed and the experimental results showed its very fast convergence to real values and effective responses. Popular DSP of TMS320F2812 was used to calculate robot's 3D attitude and translated acceleration, and the whole system were packed in a small size for humanoids robots. The output of the 3D sensors(pitch, roll, 3D linear acceleration, and 3D angular rate) can be transmitted to a humanoid robot at 200Hz frequency.

• Journal of Sensor Science and Technology
• /
• v.2 no.1
• /
• pp.11-17
• /
• 1993

We have constructed an acceleration sensor which is based on the maximum magnetic induction changes of amorphous wire as a measurand. The frequency bandwith of the constructed sensor depends on the mass of a sensing element. For $Co_{72.5}Si_{12.5}B_{15}$ amorphous wire, the bandwith is DC-700 Hz for $1{\times}10^{-3}kg$ sensing element and DC-200 Hz for $5{\times}10^{-3}kg$. The linearity of the acceleration sensor was less than 1% within the acceleration of 5 g.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.22 no.3
• /
• pp.114-122
• /
• 2014

Sensor fusion is the one of the main research topics. It offers the highly reliable estimation of vehicle movement by processing and mixing several sensor outputs. But unfortunately, every sensor has drift which degrades the performance of sensor. It means a single degraded sensor output may affect whole sensor fusion system. Drift in most research is ideally assumed to be zero because it's usually a nonlinear model and has sample variation. Plus, it's very difficult for the acceleration to separate drift from the output signal since it contains many contributors such as vehicle acceleration, slope angle, pitch angle, surface condition and so on. In this paper, modified spline interpolation is introduced as a dynamic temperature compensation method covering sample variation. Using the last known output and the first initial output is suggested to build and update compensation factor. When the system has more compensation data, the system will have better performance of compensated output because of the regression compensation model. The performance of the dynamic temperature compensation system is evaluated by measuring offset drift between with and without the compensation.

• Journal of Institute of Control, Robotics and Systems
• /
• v.19 no.5
• /
• pp.457-461
• /
• 2013

This paper proposes an image feature-based real-time RGB-D (Red-Green-Blue Depth) 3D SLAM (Simultaneous Localization and Mapping) system. RGB-D data from Kinect style sensors contain a 2D image and per-pixel depth information. 6-DOF (Degree-of-Freedom) visual odometry is obtained through the 3D-RANSAC (RANdom SAmple Consensus) algorithm with 2D image features and depth data. For speed up extraction of features, parallel computation is performed with GPU acceleration. After a feature manager detects a loop closure, a graph-based SLAM algorithm optimizes trajectory of the sensor and builds a 3D point cloud based map.

• Journal of Institute of Control, Robotics and Systems
• /
• v.21 no.12
• /
• pp.1167-1172
• /
• 2015

This paper describes the implementation of wearable AHRS for an electromagnetic motion capture system that can trace and analyze human motion on the principal nine axes of inertial sensors. The module provides a three-dimensional (3D) attitude and heading angles combining MEMS gyroscopes, accelerometers, and magnetometers based on the extended Kalman filter, and transmits the motion data to the 3D simulation via Wi-Fi to realize the unrestrained movement in open spaces. In particular, the accelerometer in AHRS is supposed to measure only the acceleration of gravity, but when a sensor moves with an external linear acceleration, the estimated linear acceleration could compensate the accelerometer data in order to improve the precision of measuring gravity direction. In addition, when an AHRS is attached in an arbitrary position of the human body, the compensation of the axis of rotation could improve the accuracy of the motion capture system.

• Smart Structures and Systems
• /
• v.5 no.6
• /
• pp.663-679
• /
• 2009

The use of Micro-Electro-Mechanical Systems (MEMS) accelerometers in geotechnical instrumentation is relatively new but on the rise. This paper describes a new MEMS-based system for in situ deformation and vibration monitoring. The system has been developed in an effort to combine recent advances in the miniaturization of sensors and electronics with an established wireless infrastructure for on-line geotechnical monitoring. The concept is based on triaxial MEMS accelerometer measurements of static acceleration (angles relative to gravity) and dynamic accelerations. The dynamic acceleration sensitivity range provides signals proportional to vibration during earthquakes or construction activities. This MEMS-based in-place inclinometer system utilizes the measurements to obtain three-dimensional (3D) ground acceleration and permanent deformation profiles up to a depth of one hundred meters. Each sensor array or group of arrays can be connected to a wireless earth station to enable real-time monitoring as well as remote sensor configuration. This paper provides a technical assessment of MEMS-based in-place inclinometer systems for geotechnical instrumentation applications by reviewing the sensor characteristics and providing small- and full-scale laboratory calibration tests. A description and validation of recorded field data from an instrumented unstable slope in California is also presented.

• The Journal of the Korea Contents Association
• /
• v.10 no.10
• /
• pp.86-93
• /
• 2010

With the introduction of smart phones, the augmented reality became popular and is increasingly drawing attention. The augmented reality in the mobile devices is becoming an individual area to study. Many applications of the augmented reality have been studied, but there are just a few studies on its combination with artificial intelligence in games. In this study, an artificial intelligence algorithm was proposed, which dynamically converts the state of the 3D agent in the augmented reality environment using the 3-Axis acceleration sensor in the smart phone. To control the state of the agent to which the artificial intelligence is applied, users used to directly enter the data or use markers to detect them. The critical values, which were determined via test, were given to the acceleration sensor to ensure accurate state conversion. In this paper, makerless tracking technology was used to implement the augmented reality, and the state of the agent was dynamically converted using the 3-Axis acceleration seonsor.

• Smart Structures and Systems
• /
• v.6 no.5_6
• /
• pp.661-673
• /
• 2010

This paper presents recent developments in an extremely compact, wireless impedance sensor node (the WID3, $\underline{W}$ireless $\underline{I}$mpedance $\underline{D}$evice) for use in high-frequency impedance-based structural health monitoring (SHM), sensor diagnostics and validation, and low-frequency (< ~1 kHz) vibration data acquisition. The WID3 is equipped with an impedance chip that can resolve measurements up to 100 kHz, a frequency range ideal for many SHM applications. An integrated set of multiplexers allows the end user to monitor seven piezoelectric sensors from a single sensor node. The WID3 combines on-board processing using a microcontroller, data storage using flash memory, wireless communications capabilities, and a series of internal and external triggering options into a single package to realize a truly comprehensive, self-contained wireless active-sensor node for SHM applications. Furthermore, we recently extended the capability of this device by implementing low-frequency analog-to-digital and digital-to-analog converters so that the same device can measure structural vibration data. The compact sensor node collects relatively low-frequency acceleration measurements to estimate natural frequencies and operational deflection shapes, as well as relatively high-frequency impedance measurements to detect structural damage. Experimental results with application to SHM, sensor diagnostics and low-frequency vibration data acquisition are presented.

• Journal of the Korea Society of Computer and Information
• /
• v.15 no.4
• /
• pp.65-74
• /
• 2010

At the aim of solving the problems appearing in traditional optical motion capturing systems such as the interference among multiple patches and the complexity of sensor and patch allocations, this paper proposes a new motion capturing system which is composed of a single camera and multiple motion sensors. A motion sensor is consisted of an acceleration sensor and a gyro sensor to detect the motion of a patched body and the orientation (roll, pitch, and yaw) of the motion, respectively. Although Image information provides the positions of the patches in 2D, the orientation information of the patch motions acquired by the motion sensors can generate 3D pose of the patches using simple equations. Since the proposed system uses the minimum number of sensors to detect the relative pose of a patch, it is easy to install on a moving body and can be economically used for various applications. The performance and the advantages of the proposed system have been proved by the experiments.