• Transactions of the Korean Society of Automotive Engineers
• /
• v.10 no.5
• /
• pp.73-80
• /
• 2002

Dimethyl ether (DM) is one of the most attractive alternative fuel far compression ignition engine. Its main advantage in diesel engine application is high efficiency of diesel cycle with soot free combustion though conventional fuel injection system has to be modified due to the intrinsic properties of DME. Experimental study of DME and conventional diesel spray employing a common-rail type fuel injection system with a 5-holes sac type injector (hole diameter 0.168 ㎜/hole) was performed in a high pressure chamber pressurized with nitrogen gas. A CCD camera was employed to capture time series of spray images followed by spray cone angles and penetrations of DME were characterized and compared with those of diesel. Under atmospheric pressure condition, regardless of injection pressure, spray cone angles of the DME were wider than those of diesel and penetrations were shorter due to flash boiling effect. Tip of the DME spray was farmed in mushroom like shape at atmospheric chamber pressure but it was disappeared in higher chamber pressure. On the contrary, spray characteristics of the DME became similar to that of diesel under 3MPa of chamber pressure. Hole-to-hole variation of the DME spray was lower than that of diesel in both atmospheric and 3MPa chamber pressures. At 25MPa and 40MPa of DME injection pressures, regardless of chamber pressure, intermittent DME spray was observed. It was thought that vapor lock inside the injector was generated under the two injection pressures.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.5 s.120
• /
• pp.471-477
• /
• 2007

This paper presents the characteristics of electromagnetic field uniformity in a reverberation chamber with flat diffusers composed of multiple dielectric materials that can be used as an alternative facility for the analysis, test and evaluation of electromagnetic interference and immunity. The field characteristics and the size of the test volume inside the reverberation chamber with the new diffuser of multiple dielectric materials are simulated and analyzed at $2.5{\sim}3$ GHz band. The FDTD method is used to analyze the field characteristics. The field uniformity, polarization characteristics and tolerance are improved by the new diffuser with smaller physical size. The reverberation chamber with flat diffusers composed of multiple dielectric materials shows better electromagnetic performance and larger test volume than normal chamber.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.1
• /
• pp.39-44
• /
• 2006

An OWC-type Wave Energy Conversion passes through 3 steps energy conversion process. This paper deal with the internal oscillating flow and effect of shape of air chamber and duct at setting place of turbine by numerical analysis using commercial CFD code, FLUENT. Air chamber and duct in OWC-type wave energy conversion are adopting sudden expanded and contracted form for high-efficiency. So, whole oscillating flow from OWC-type chamber to outlet duct through duct was solved by steady and unsteady analysis in order that flow efficiency of air chamber and duct was made better.

• Journal of Navigation and Port Research
• /
• v.31 no.1 s.117
• /
• pp.29-33
• /
• 2007

An OWC-type Wave Energy Conversion passes through 3 steps energy conversion process. This paper deal with the internal oscillating flow and effect of shape of air chamber and duct at setting place of turbine by numerical analysis using commercial CFD code, FLUENT. Air chamber and duct in OWC-type wave energy conversion are adopting sudden expanded and contracted form for high-efficiency. So, whole oscillating flow from OWC-type chamber to outlet duct through duct was solved by steady and unsteady analysis in order that flow efficiency of air chamber and duct was made better.

• Journal of Yeungnam Medical Science
• /
• v.6 no.1
• /
• pp.81-86
• /
• 1989

These days the posterior chamber lens implantation following the extracapsular cataract extraction has become the standard procedure except those patients who can not take it in one reason or another. In past, however, the anterior chamber lens implantation was popular for sometimes. Even now in those patient complicated by vitreous loss, the anterior chamber lens implantation following anterior vitrectomy is indicated in some cases. We have become interested in the difference of the intraocular pressure change in the patients who underwent the uneventful extra-capsular cataract extraction followed by anterior chamber lens implantation in routine manner and in those whose extra-capsular cataract extraction were complicated by vitreous loss and eventually needed the anterior vitrectomy before the anterior chamber lens implantation. We reviewed the medical records of 15 cases of the former group and 11 cases of the latter one in 1986 through 1988. There was some difference in the postoperative pressure in the two groups, but it was not statistically significant.

• Journal of Korean Society of Water and Wastewater
• /
• v.33 no.3
• /
• pp.177-190
• /
• 2019

The purpose of this study was to analyze the effects of sewerage facilities through I/I analysis by rainfall by selecting areas where storm overflow diverging chamber is remained due to the non-maintenance drainage equipment when the sewerage system was reconstructed as a separate sewer system. Research has shown that wet weather flow(WWF) increased from 106.2% to 154.8% compared to dry weather flow(DWF) in intercepting sewers, and that the WWF increased from 122.4% to 257.6% in comparison to DWF in storm overflow diverging chamber. As a result, owing to storm overflow diverging chamber of partially separate sewer system with untreated tributary of sewage treatment plant, rainfall-derived infiltration/inflow(RDII) has been analyzed 2.7 times higher than the areas without storm overflow diverging chamber. Meanwhile, infiltration quantity of this study area was relatively higher than that of other study areas. Therefore, it is necessary to reduce infiltration quantity through sewer pipe maintenance nearby river. Drainage equipment maintenance should be performed not to operate storm overflow diverging chamber in order to handle the appropriate sewage treatment plant capacity for rainfall because it is also expected that RDII due to rain will occur after maintenance. In conclusion, it is necessary to recognize aRDII(allowance of rainfall-derived infiltration/inflow) and to be reflected it on sewage treatment plant capacity because aRDII can occur even after maintenance to the complete separate sewer system.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.30 no.3
• /
• pp.431-438
• /
• 2003

This study investigates pulp chamber temperature rise during composite resin polymerization by plasma arc(Group III : Flipo 3 sec, Group IV : Flipo 5 sec) and LED curing units(Group V : Lux-O-Max, 40 sec) as well as conventional halogen lamp curing units(Group I : VIP mode3, 20 sec, Group II : VIP mode6, 20 sec). The results are as follows : 1. All of the investigated pulp chamber temperature rises are lower than the boundary temperature could result in irreversible damage to the pulpal tissue ($5.5^{\circ}C$). 2. In the group II, it is found the significantly higher pulp chamber temperature rise than any other groups(p<0.05). 3. In the group of composite resin light-cured with VIP, it is found the significantly higher pulp chamber temperature rise in the group II than group I(p<0.05). 4. In the group of composite resin light-cured with Flipo, it is found the significantly higher pulp chamber temperature rise in the group IV than group III (p<0.05). 5. In the case of comparing VIP and Flipo, group II is significantly higher pulp chamber temperature rise than group III, IV(p<0.05), and group IV is significantly higher pulp chamber temperature rise than group I(p<0.05), and it does not significantly differ between group I and III. 6. In the group of composite resin light-cured with Lux-O-Max, it is found the significantly lower pulp chamber temperature rise than any other groups (p<0.05).

• Korean Journal of Heritage: History & Science
• /
• v.42 no.3
• /
• pp.106-130
• /
• 2009

The aim of this paper is analysis of structure and development pattern about wooden coffin and chamber tombs in Gyeongju from the 2nd century B.C. to the 3rd century A.D. for researching to socio-political tendency and growth process of Sarokuk. Tombs buried with iron objects were built in Youngnam(嶺南) from the 2nd century B.C. with spread wooden coffin with stone mound(積石木棺墓). Also medium or small sized wooden coffin tombs buried with bronze mirror of western Han(前漢) and soft stoneware(瓦質土器) were appeared the 2nd century B.C. in Gyeongju, because of establishment of Han's commanderies(漢郡縣) in the Korean Peninsula and refuge from Daedong river(大同江) to Jinhan(辰韓). Separate tombs(獨立墓) with lots of bronze object ware assumed high ranked tombs of parsonage(司祭王) or local chief(地域首長). From the 2nd century A.D. the size of wooden coffin tombs became enlarged and funerary objects ware abundant, for example Sarari 130th tomb(舍羅里 130號). The burying pattern of this tomb is similar to wooden chamber tombs in Lelang(樂浪), which had prestige goods like lacquer ware and bronze mirror in wood box(木匣) beside coffin. Appearance of these wooden chamber tombs that were different from original wooden coffin tombs imply interaction between Lelang and these area with iron. Sarari community that held right of trade and distribution to outside through the geographical advantage grew up centered position in Gyeongju politically, socially, and culturally. Chamber in tomb as a new structural notion that can secure funerary objects became firmly was established from the 2nd century A.D. in Gyeongju and large sized wooden chamber tombs were generally built early of the 3rd century A.D. This tendency was reflected in stratification of community and growth as center of local state. After late of the 3rd century A.D. Gyeongju type wooden chamber tomb(慶州式木槨墓) which had subordinate outer coffin(副槨) was appeared and then subordinate outer coffin was as bigger as main chamber(主槨) the 4th century A.D., because of centralization and stratification in society and unification of various communities among the Gyeongju area.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.11a
• /
• pp.252-256
• /
• 2001

Scattering of surface materials has been known as one of the most important aspects in evaluating the acoustics of concert halls are designed. One of the methods that can reduce the errors in estimating the reverberation time and other acoustic parameters through computer modeling is to calculate scattering coefficient of surface materials. However. so far, no objective and reliable methods measuring scattering coefficient has been suggested. In this situation, ISO has suggested the method of measuring the random-incidence scattering coefficient on surfaces in diffuse field, whereas AES has introduced a method on directional-incidence in free field. In this study, the scattering coefficients of five kinds of hemispheres (1.5, 2.0. 2.5. 3.0. 3.5cm) were measured by using the ISO method in 1：10 reverberation chamber. It was found that 3.0cm hemisphere has the highest scattering coefficient satisfying 95％ reliability.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.3 no.1
• /
• pp.1-9
• /
• 1979

Methanol was examined as supplemental fuel for open chamber type and pre-combustion chamber type diesel engine. Pre-determined quantities of diesel oil were injected as ordinary diesel engines and methanol was added at inlet pipe using venturi, nozzel and and float chamber for the rest of the charge. In this mode of operation, addition of methanol reduced inlet and exhaust temperature. Inlet air quantities were essentially unchanged in spite of lower inlet temperature. Exhaust smoke was significantly reduced At light load when both diesel oil and methanol were introduced with small quantities, specific heat consumption was considerably increased. However, with the increase of the quantity of methanol or diesel oil, specific heat consumption was improved. With sufficient quantities of diesel oil enough to produce the power above 3/4 load, addition of methanol showed better thermal economy.