• 보존과학연구
• /
• 통권20호
• /
• pp.5-20
• /
• 1999

We have analyzed the allele and genotype frequencies from 10 fractions of ancient human skeleton in 3 pieces of Jar coffin excavated from Naju Bokamni3rd tumulus by PCR amplification, high resolution polyacrylamide gelelectorphoresis and silver staining. We could isolate human genomic DNA from 3 bone fractions but the rest of them could not be used as materials due to being decayed. We could detect sex determination as male and 3 genotypes of STR system, HUMTHO1, HUMTPOX and HUMC5F1PO from the bone fraction of left side in Jar coffin 3 and see the slightly reaction suggesting the sex as male from the bone fraction of the left side in Jar coffin 2 and female from the right side in Jar coffin 3.We have also analyzed the genotype frequencies of mitochondria from the bone fractions of the left side and the right side in jar coffin 3, respectively. From the result of indetifiying at nucletide position between 16018 and 16378of the base of hyper variable region(HV1) in the control region, We can presume that the both bones have the same maternal inheritance.

• 조명전기설비학회논문지
• /
• 제29권9호
• /
• pp.96-102
• /
• 2015

This paper presents battery charging method using 3-phase AC-DC boost converter. General battery charging method is that charging the battery voltage to the reference voltage according to the constant current(CC) control, when it reaches the reference voltage, charging the battery fully according to the constant voltage(CV) control. However, battery chaging time is increased because of the battery impedance, constant current charging section which shoud take the large amount of charge is narrow, and constant voltage charging section which can generate insufficient charge is widen. To improve this problem, we proposes the method to reduce the charging time according to the SOC(State of Charge) estimation using battery impedance.

• 한국생활과학회지
• /
• 제18권3호
• /
• pp.793-798
• /
• 2009

Hair cut is one of the best useful technical tool for hair styling. In this study using the rule of the layers of hair design, balanced for visual art, perceptual ability and form created by the principles of analysis and offer hair cuts and hair design of the representation of regions and even hair design as the basis of a student of Hair Beauty and all the people working in the field can create a variety of hair design puts the purpose to establish a basis. The result of this study can be outline as follows: First, the step line and the movement of the relationship between the law of the layers above and below the length of the same layer techniques, the same consists of a vertical cross-section of the overall round shape of the cut same layer is created and the appropriate volume and movement, the movement of low-layer round a little bit more feeling and expression is used when you want. High-layer used to want to move a lot of light and could see that. Second, the layer of the Law and over direction, lifting, section, the line control. weight control and analyzed by principle and the principle of the process of forming the written form was unknown. Third, hair design, the expansion of the expressive power of the law of the layers, and the section of the over direction depends on the presence of line control to express the length of the outline I had to, lifting the weight to adjust form controls, and the expression of Hair Design will be expanding the width. A hair designer, a layer style to create a zone he thought the law of the first layer formative area To further the reach will be a lot of research, leading up formative aspects of this research thesis do not have missing parts, or as a result of the Beauty of Hair Design and the width of a hair design education in the field can perform to help feed the reference materials that will be.

• The Korean Journal of Pain
• /
• 제7권2호
• /
• pp.193-198
• /
• 1994

The analgesic efficacy and side-effects of combined continuous epidural infusion of bupivacaine and morphine, in comparison with intramuscular (IM) administration of narcotics, for postoperative pain relief after cesarean section and hysterectomy were evaluated. We divided 60 patients into 4 groups randomly. IM (meperidine) group after cesarean section (Group 1, n = 20); Continuous epidural group after cesarean section (Group 2, n=20); IM (meperidine) group after hysterectomy (Group 3, n=10); Continuous epidural group after hysterectomy (Group 4, n=10). Following each operation, the epidural groups had an epidural catheter placed ($L_{2{\sim}3}$ or $L_{3{\sim}4}$), and a bolus of 1.5mg of morphine was injected, and followed by continuous infusion of 0.3% bupivacaine 2ml/hour and morphine 2.5mg/day for 48 hours. The IM groups had received meperidine 50mg IM injection every 4 hours as needed. We evaluated analgesic efficacy with VAS (visual analogue scale) at 1, 2, 24, 48, and 72 hours after operation. The side-effects (nausea &, vomiting, respiratory depression, pruritus and urinary retention) were evaluated with 4 points scale at day 1, 2, and 3 after operation. The results were as follows 1) The continuous epidural (bupivacaine+morphine) groups were superior to the IM (meperidine) groups with respect to postoperative analgesia at 1, 2, and 24 hours after cesarean section, and at 1, 2, 24, and 48 hours after hysterectomy. 2) Vomiting were more frequent in the epidural groups 2 days after cesarean section. 3) Pruritus was more frequent in the epidural groups 1 and 2 days after cesarean section.

• Journal of Electrical Engineering and Technology
• /
• 제3권4호
• /
• pp.484-490
• /
• 2008

In this paper, an integrated fault section detection and isolation strategy is proposed based on the application of the Distribution Automation System(DAS) utilizing advanced IT and communication technologies. The Feeder Remote Terminal Unit(FRTU) has been widely used to collect data in the Korean distribution system. The achieved data is adopted in this method for detecting multiple fault types. Especially in the case of single phase-to-ground fault, the fault section is detected by comparison of the zero-sequence current phase angle. The test results have verified the effectiveness of the proposed method in a radial distribution system through extensive simulations in Matlab/Simulink. Furthermore, a communication-based demo system identical to the simulation model has been developed, and it can be applied as an online monitoring and control program for fault section detection and isolation.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제47권2호
• /
• pp.91-98
• /
• 2021

Objectives: Hyaluronoglucosaminidase (hyaluronidase) increases the local intercellular permeability of the peripheral lymphatic channel and capillaries, which may help reduce edema. In the present study, the effects of hyaluronidase on postoperative edema and pain reduction were evaluated. Materials and Methods: The study included 38 patients who underwent guided bone regeneration (GBR) surgery before implantation. Patients were randomly assigned to either the control group (n=20) or the test group (n=18). Hyaluronidase was injected into the GBR site of subjects in the test group. Postoperative edema was evaluated by measuring the distance between specific facial landmarks immediately after surgery (T1) and 2-4 days after surgery (T2). The degree of pain at T2 and at 10-14 days after surgery (T3) was assessed. Results: In the test group, the degree of swelling was lower than in the control group, however, only two measurements, from the tragus to the mouth corner and from the outer canthus to the mouth corner, showed statistically significant differences (P=0.012 and P=0.001, respectively). The anti-edema effect of hyaluronidase was more effective in the maxilla than in the mandible. In the maxilla, the percentage of facial swelling was significant for three measurements. However, in the mandible, the percentage of facial swelling was significant for only one measurement. Low levels of pain that were similar at T2 and T3 were reported in both groups. Conclusion: The results indicate the degree of swelling was lower in the test group and hyaluronidase appeared to be more effective in the maxilla. The degree of pain reduction was similar between groups. Further in vivo and randomized controlled trials with larger sample sizes are warranted.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제10권1호
• /
• pp.69-72
• /
• 2005

Bleaching powder solution (1 to $5\%$), slaked lime solution (0.1 to $0.5\%$) and formalin (1 and $2\%$) were tested for their efficacy against cytoplasmic polyhedrosis virus and Nosema mylittansis spores to control virosis and pebrine respectively in tasar silkworm, Antheraea mylitta in indoor rearing condition. All the disinfectants tested were found effective in suppressing the infection of virosis and pebrine significantly. Complete inactivation of Antheraea mylitta cytoplasmic polyhedrosis virus (AmCPV) was recorded when treated with $4\%$ bleaching powder, $0.4\%$ slaked lime for 20 min and $2.0\%$ formalin for 30 min. Similarly treatments of $3.0\%$ bleaching powder solution for 20 min and $2.0\%$ formalin for 30 min were found effective in complete inactivation of N. mylittanis spores.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2004년도 추계학술대회논문집
• /
• pp.346-349
• /
• 2004

In the previous experimental study about extru-bending of angle product, the bending of extruded angle products with the '${\wedge}$' section and 'ㄱ' section can be abtained by the hot metal extru-bending machine with the two punches moving in the different velocity. The bending curvature can be controlled by the different velocity of billets through the two-hole container. This paper describes simulation of extru-bending process by the difference of punch velocities. The result of the forming simulation by $DEFORM^{TM}-3D$ shows that the bending phenomenon at the die exit during extrusion can be abtained by the two punches moving in the different velocity. And it is possible to design extrusion dies and to control the curvature of product through the simulation of extru-bending process by analysis

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.2701-2706
• /
• 2003

This paper describes weld seam tracking and error compensation methods of automatic plasma arc welding system designed for the corrugation panel that consists of a linear section and a curved section with various curvatures. Realizing automatic welding system, we are faced with two problems. One is a precise seam tracking and the other is an arc length control. Due to the complexity of the panel shape, it is difficult to find a seam and operate a torch manually in the welding process. So, laser vision sensor for seam tracking is equipped for sensing the seam position and controlling the height of a torch automatically. To attain more precise measurement of an arc length, we measure the 3D shape of the panel and analyze error factors according to the various panel states and caused errors are predicted through the welding process. Using that result, compensation algorithm is added to that of arc length control and real time error compensation is achieved. The result shows that these two methods work effectively.

• 대한임베디드공학회논문지
• /
• 제3권2호
• /
• pp.66-73
• /
• 2008

The pipes have been laid underground while the industry is developing. We have to take maintenance procedure when the pipes are cracked or ruptured. It is very difficult jop to check pipe's crack because the pipes are narrow and laid underground. Using in-pipe robot, we can check the conditions of inner section of pipes, therefore, we designed a crawler type robot to search cracked pipe. In this paper, we have made a special focus on the control of the robot using differential drive algorithm to move in curved section of pipes. The detailed design of the robot with experimental result show the effectiveness of the robot in pipe maintenance.