• The Journal of Korean Academy of Prosthodontics
• /
• v.50 no.1
• /
• pp.10-20
• /
• 2012

Purpose: The purpose of this study was to investigate the stress distribution in mandibular implant-supported overdentures and tooth-supported overdentures with telescopic crowns. Materials and methods: The assumption of this study was that there were 2, 3, 4 natural teeth and implants which are located in the second premolar and canine regions in various distributed conditions. The mandible, teeth (or implants and abutments), and connectors are modeled, and analyzed with the commercial software, ANSYS Version 10.1. Stress distribution was evaluated under 150 N vertical load bilaterally on 3 experimental conditions - between canine areas, canine and $2^{nd}$ premolars, 10 mm posterior to $2^{nd}$ premolars. Results: Overall, the case of the implant group showed more stress than the case of the teeth group in stress distribution to bone. In stress distribution to superstructures of tooth and implants, there was no significant difference between TH group and IM group and the highest stress appeared in TH-IV and IM-IV. The stress caused from bar was much higher than those of implant and tooth. TH group showed less stress than IM group in stress distribution to abutment teeth and implant. Conclusion: The results shows that it is crucial to make sure that distance between impact loading point and abutment tooth does not get too far apart, and if it does, it is at best to set abutment tooth on premolar tooth region. It will be necessary to conduct more experiments on effects on implants, natural teeth and bone, in order to apply these results to a clinical treatment.

• Korean Journal of Environmental Agriculture
• /
• v.25 no.1
• /
• pp.77-84
• /
• 2006

This study was conducted to find a system for screening organic resources with 16 species, 62 samples which were selected to randomizing point from city, province and industrial areas in the whole country. Content of organic matters were $65.3%{\sim}98.0%$ in all samples so that they were largely over than 60%, raw material regulation of compost. Concentrations of total nitrogen and total phosphorus were $0.7{\sim}4.8%\;and\;0.8{\sim}5.0$, they could look for effect of the nitrogen and phosphorus supply as a raw material of compost. In case of 8 elements concentrations of heavy metal, they were too high to use as raw materials of compost which were over to regulation limit in Cu, Cr, Ni, and As from fiber industry, Ni from food company and leather industry, and the others are adapt to limit levels. HEM contents fro the highest to $113mg\;kg^{-1}$ from liber industry and PAHs content were the highest to $3,462ug\;kg^{-1}$ from paper-mill manufacture. Distribution of PAHs concentiations were naphthalene>phenanthrene>pyrene>fluoroanthene>acenaphthene. $Microtox{(R)}\;EC_{50}$ values for bioassay were pharmaceutical company>paper-mill manufacture>industrial area sewage sludge>fiber industry>urban sewage sludge>metropolitan sewage sludge. HEM between Zn, Cu, and Ni was significant at the 99% and between Cd was significant at the 95%, Microtox between Hg and BEM significant at the 95%.

• Journal of Astronomy and Space Sciences
• /
• v.20 no.4
• /
• pp.283-298
• /
• 2003

The 2001 Leonid meteor storm has been observed all over the world, and its most intense flux since the last few decades has caused great interest among both laymen and experts. Especially, its maximum hours occurred at dawn hours of Nov. 19 in the east Asia, during which moonless clear night at the Mt. Bohyun allowed us near perfect condition of observation. Observation was carried out in the period of 01:00∼05:40(KST), which include the predicted maximum hours, with all-sky camera installed for upper atmospheric airglow research. Tn this paper we analyze 68 all-sky images obtained in this period, which contain records of 172 meteors. Utilizing the zenith hourly rate(ZHR) of 3000 and magnitude distribution index of 2, which were reported to International Meteor Organization by visible observers in the east Asia, we estimate the limiting magnitude of about 3 for meteors detected in our all-sky images. We then derive magnitudes of 83 meteors with clear pixel brightness outlines among the initially detected 172 meteors by comparing with neighbor standard stars. Angular velocities of meteors needed for computing their passing times over an all-sky image are expressed with a simple formula of an angle between a meteor head and the Leonid radiant point. The derived magnitudes of 83 meteors are in the range of -6∼-1 magnitude, and its distribution shows a maximum new -3mag. The derived magnitudes are much smaller than the limiting magnitude inferred from the comparison with the result of naked-eye observations. The difference may be due to the characteristic difference between nearly instantaneuous naked-eye observations and CCD observations with a long exposure. We redetermine magnitudes of the meteors by adjusting a meteor lasting time to be consistent with the naked-eye observations. The relative distribution of the redetermined magnitudes, which has a maximum at 0 mag., resembles that of the magnitudes determined with the in-principle method. The relative distribution is quite different from ones that decrease monotonically with decreasing magnitudes for meteors(1∼6) sensitive to naked-eye observations. We conclude from the magnitude distribution of our all-sky observation that meteors brighter than about 0 mag., appeared more frequently during the 2001 Leonid maximum hours. The frequent appearance of bright meteors has significantly important implication for meteor research. We noted, however, considerably large uncertainties in magnitudes determined only by comparing standard stars due to the unknown lasting time of meteors and the non-linear sensitivity of all-sky camera.

• Journal of Soil and Groundwater Environment
• /
• v.7 no.2
• /
• pp.63-71
• /
• 2002

The authors selected the modified soil method, and then performed the geotechnical and environmental laboratory test, and evaluated whether the modified soil liner could be accepted as a barrier layer in landfill. Unlike the results of the natural soil(CL), those of the hydraulic conductivity test of stabilized soil met the standard value. According to these results, the optimal mixing ratio of a mixture(cement : bentonite : stabilizing agent) was 90 : 60 : 1 with mass ratio(kg) for 1㎥ with soil, and it was possible to use poor quality bentonite. B\circled2 because of a little difference from results with high quality bentonite. B\circled1. The Cation Exchange Capacity(CEC) of the modified soil was increased about 1.5 times compared with the natural soil; however. the change of CEC with a sort of additives was not detected. In order to observe the change of the chemical components and crystal structures, the natural and the modified soils with the sorts of additives were measured by the XRF(X-Ray Flourescence Spectrometer) and SEM, but there was no significant change. The artificial leachate with the heavy meals ($Pb^{2+}$ , $Cu^{2+}$, $Cd^{2+}$ Zn$^{2+}$ 100mg/L) was passed through the natural soil and modified soils in columns. In the natural soil, Cd$^{2+}$ and $Zn^{2+}$ were identified, simultaneously the pH of outflow was lower, and then came to the breakthrough point. The removal efficiency of the natural soil was showed in order of following : $Pb^{2+}$ ≒$Cu^{2+}$ > $Zn^{2+}$ > $Cd^{2+}$ On the other hand, modified soils were not showed the breakthrough condition like the result of the natural soil. The modified soil with the lower quality bentonite, B\circled2(column3) was more stable with respect to chemical attack than that with the higher bentonite, B\circled1(column2) because the change range of outflow pH in columns was less than that of outflow pH in column2. In addition, the case of adding the stabilizing agent(column4) was markedly showed the phenomena.ena.

• The korean journal of orthodontics
• /
• v.37 no.2 s.121
• /
• pp.98-113
• /
• 2007

Objective: The purpose of this study was to evaluate the displacement pattern and the stress distribution shown on a finite element model 3-D visualization of a dry human skull using CT during the retraction of upper anterior teeth. Methods: Experimental groups were differentiated into 8 groups according to corticotomy, anchorage (buccal: mini implant between the maxillary second premolar and first molar and second premolar reinforced with a mini Implant, palatal: mini implant between the maxillary first molar and second molar and mini implant on the midpalatal suture) and force application point (use of a power arm or not). Results: In cases where anterior teeth were retracted by a conventional T-loop arch wire, the anterior teeth tipped more postero-inferiorly and the posterior teeth moved slightly in a mesial direction. In cases where anterior teeth were retracted with corticotomy, the stress at the anterior bone segment was distributed widely and showed a smaller degree of tipping movement of the anterior teeth, but with a greater amount of displacement. In cases where anterior teeth were retracted from the buccal side with force applied to the mini implant placed between the maxillary second premolar and the first molar to the canine power arm, it showed that a smaller degree of tipping movement was generated than when force was applied to the second premolar reinforced with a mini implant from the canine bracket. In cases where anterior teeth were retracted from the palatal side with force applied to the mini implant on the midpalatal suture, it resulted in a greater degree of tipping movement than when force was applied to the mini implant between the maxillary first and second molars. Conclusion: The results of this study verifies the effects of corticotomies and the effects of controlling orthodontic force vectors during tooth movement.

• Therapeutic Science for Rehabilitation
• /
• v.9 no.1
• /
• pp.24-44
• /
• 2020

Objective : To develop an occupation-based bilateral upper extremity training protocol that can be effectively applied in a medical setting Methods : The research process using the delphi technique was carried out in 3 stages. The first stage was an open questionnaire development stage, The first draft is prepared through literature review and open questions were developed through preliminary research based on the draft. The second stage was the delphi survey. Based on the responses of the experts obtained through the open Delphi survey, the adequacy of the training protocol was shown on a Likert 5 point scale. The items were edited and deleted, reconstructed by analyzing the mean and standard deviation, stability, convergence degree, consensus, and content validity ratio through the questionnaire. The third step was the completion of the protocol. After discussions between researchers, the finalized protocol contents were reorganized to complete the occupation-based bilateral upper extremity training protocol for medical setting. Results : The final protocol consisted of 9 items across 3 areas in the occupation-based intervention selection domain and 81 items across 4 areas in the bilateral upper extremity training domain, intervention period, and evaluation. Conclusions : This study suggests an evidence-based method that collects the opinions of occupational therapists in order to use occupation-based activities as interventions in a situation that currently sees occupational therapy primarily performed in hospitals. It is also meaningful that the bilateral upper extremity training can be applied effectively in clinical situations by concretely presenting.

• Pediatric Infection and Vaccine
• /
• v.7 no.2
• /
• pp.201-210
• /
• 2000

Purpose : We observed response to PPD skin test and local side reactions among subjects who received inoculation with Tokyo 172 BCG strain by percutaneous method using multiple puncture device. Methods : 138 infants and young children were enrolled at Yongdong Severance Hospital and 7 private clinics. 5TU PPD skin test were performed at 4 months after inoculation. The local reactions at multiple puncture site were observed in 3 days, 4~6 weeks, 36 weeks, and 48 weeks after inoculations and physical check up was done for evaluation of lymphadenopathy. Results : During 48 weeks of observation period, 96 subjects among 138 who were enrolled were followed up completely with records of PPD skin test and observation of local side reactions, presenting with the photos. The size of the induration after 48 hours of PPD skin test, was less than 5mm in six subjects(6.3%), greater than 10mm in sixty seven subjects(70.0%) and greater than 12mm in forty six subjects(47.9%). All subjects showed inflammatory reaction and pustules at multiple puncture sites and only just small papules, ulcer and pustules remained 4-6 weeks later. Eight to twelve weeks later, all local inflammatory skin reactions disappeared with remaining crust. After 48 weeks, 4(4.2%) subjects showed no scar with only faint stain on the puncture site. More than 70% of subjects showed more than 10 faint pin-point scars on the sites. However, the size of scar was clearly smaller compared to that of intradermal inoculation. There were no cases of lymphadenopathy. Conclusion : We observed good immune response to 5TU PPD skin test among the infant and young children who were immunized with percutanous inoculation of Tokyo 172 BCG strain. We could not find any severe local scar at inoculation sites. A degree of satisfaction of the parents whose children received the percutaneous injection was very high.

• Geophysics and Geophysical Exploration
• /
• v.10 no.3
• /
• pp.191-202
• /
• 2007

To identify the detailed attenuation structure in the southern Korean Peninsula, a numerical test was conducted for the Q tomography inversion to be applied to the accumulated dataset until 2005. In particular, the stochastic pointsource ground-motion model (STGM model; Boore, 2003) was adopted for the 2D Q tomography inversion for direct application to simulating the strong ground-motion. Simultaneous inversion of the STGM model parameters with a regional single Q model was performed to evaluate the source and site effects which were necessary to generate an artificial dataset for the numerical test. The artificial dataset consists of simulated Fourier spectra that resemble the real data in the magnitude-distance-frequency-error distribution except replacement of the regional single Q model with a checkerboard type of high and low values of laterally varying Q models. The total number of Q blocks used for the checkerboard test was 75 (grid size of $35{\times}44km^2$ for Q blocks); Q functional form of $Q_0f^{\eta}$ ($Q_0$=100 or 500, 0.0 < ${\eta}$ < 1.0) was assigned to each Q block for the checkerboard test. The checkerboard test has been implemented in three steps. At the first step, the initial values of Q-values for 75 blocks were estimated. At the second step, the site amplification function was estimated by using the initial guess of A(f) which is the mean site amplification functions (Yun and Suh, 2007) for the site class. The last step is to invert the tomographic Q-values of 75 blocks based on the results of the first and second steps. As a result of the checkerboard test, it was demonstrated that Q-values could be robustly estimated by using the 2D Q tomography inversion method even in the presence of perturbed source and site effects from the true input model.

• Korean Journal of Microbiology
• /
• v.42 no.3
• /
• pp.185-194
• /
• 2006

The aim of this study was to identify the bacteria isolated from endodontic lesions by cell culture and to determine the antimicrobial susceptibility of them against 8 antibiotics. The necrotic pulpal tissues were collected from 27 infected root canals, which were diagnosed as endodontic infection. Samples were collected aseptically from the infected pulpal tissue of the infected root canals using a barbed broach and a paper point. The cut barbed broaches and paper points were transferred to an eppendorf tube containing $500{\mu}l\;of\;1{\times}PBS$. The sample solution was briefly mixed and plated onto a BHI-agar plate containing 5% sheep blood. The agar plates were incubated in a $37^{\circ}C$ anaerobic chamber for 2 to 5 days. The bacteria grown on the agar plates were identified by comparison of 16S rRNA gene (rDNA) sequencing method at the species level. To test the sensitivity of the bacteria isolated from the infected root canals against 8 antibiotics, minimum inhibitory concentrations (MIC) were determined using broth dilution assay. The data showed that 101 bacterial strains were isolated and were identified. Streptococcus spp. (29.7%) and Actinomyces spp. (21.8%) were predominantly isolated. The 9 strains were excluded in antimicrobial susceptibility test because they were lost during the experiment or were not grown in broth culture. The percentage of bacteria susceptible for each antibiotic in this study was clindamycin, 87.0% (80 of 92); tetracycline, 75.0% (69 of 92); cefuroxime axetil, 75.0% (69 of 92); amoxicillin + clavulanic acid (5:1), 71.7% (66 of 92); penicillin G, 66.3% (61 of 92); erythromycin, 66.3% (61 of 92); amoxicillin, 44.6% (41 of 92); and ciprofloxacin, 31.5% (29 of 92). The susceptibility pattern of 8 antibiotics was dependent on the host of the bacteria strains rather than the kinds of bacterial species. These results indicate that antibiotic susceptibility test should be performed when antibiotics are needed for the treatment of infected root canals.

• Economic and Environmental Geology
• /
• v.47 no.6
• /
• pp.563-569
• /
• 2014

Ruby is one of the most favor colored gem, for beautiful red tone, be high in scarcity value. However, rubies with high quality are produced in restricted regions, such as in Thailand, Sri Lanka, Myanmar, and Tanzania etc., and they have been gradually exhausted by mining for a long period. Therefore, improving qualities of low level rubies with various treatments is arising an alternative way to obtain better rubies. Gemological and mineralogical properties of the natural ruby from Tanzanian were studied with heat treatments. Those characteristics were compared between only heat and adding flux materials under heating. Tanzanian raw rubies were applied a heat treatment ($1,600^{\circ}C$ for 6 hours). However, chromameter and UV-Vis analyses found that a simple heat treatment is inappropriated for the Tanzanian ruby. Although $Cr^{3+}$ containing for red color in the ruby increased with heat treatment, the ruby displays dark medium red because of Fe in the ruby as a form of $Fe_2O_3$. The low transparency after heat treatment is attributed to the recrystallization of $SiO_2$ which has a low melting point. Chromameter confirmed adding Pb-containing flux under heating greatly improves the clarity and color of Tanzanian rubies with micro-fractures and cavities on the surface. EMPA results show that Pb as an additive fills the cavities and cracks on raw Tanzanian rubies during the heat treatment. As a rewult of it, the quality of the Tanzanian ruby raw dramatically improved. These results indicate that the heat treatment with an additive (Pb in this study) is an effective way to obtain better quality of the Tanzanian ruby. Consequently, this study suggests a suitable method to improve the properties of the Tanzanina ruby. The result of this study would provide useful information to upgrade the qualities of similar gem stones such as corundum and sapphire.