• Proceedings of the KSME Conference
• /
• 2004.11a
• /
• pp.102-107
• /
• 2004

In general, major components of nuclear power plant have been evaluated based on 2-dimensional design codes conservatively. However, more exact assessment is necessary for continued operation beyond the design life. In this paper, 3-dimensional stress and fatigue analyses reflecting full geometry and monitored operating condition of reactor pressure vessel have been carried out. The analyses results showed that conservatism of current 2-dimensional evaluation based on design transient. Therefore, it is anticipated that the schemes developed from this research such as 3-dimensional finite element modeling, stress analysis and fatigue analysis related techniques can be utilized as fundamental tools for exact lifetime evaluation and license renewal of major nuclear components.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.24 no.62
• /
• pp.79-87
• /
• 2001

Usability has become a primary factor in determining the acceptability and consequent success of consumer product. It is common that the product usability is evaluated by objective performance measures and/or subjective user preference measures. This study is concerned with objective evaluation of the product usability using 3-dimensional motion analysis. We evaluated car-audio position using 3-dimensional motion analysis. The parameters investigated in this experiment were height of car-audio, left-right angle, and front-end angle. The experimental results showed that the usability evaluation method using motion analysis was consistent with user's subjective assessment. This objective method can be applied to not only car-audio position evaluation but also various consumer products'usability evaluation.

• Journal of the Korea Computer Industry Society
• /
• v.3 no.8
• /
• pp.1007-1018
• /
• 2002

A systematic and multi-dimensional analysis in evaluation results may play a role of providing both learners and instructors with essential information. Conventional types of evaluation research have a tendency of partiality for developing evaluation tools, and analyzing the evaluation results has mostly been fragmentary and a one-dimensional analysis. In this study, through analyzing evaluation results in a multi-dimensional way, a multi-dimensional evaluation result analyzing system was developed for the purpose of providing various information for both learners and instructors to accomplish quality learning teaching. Dimensions are classified into four dimensions including period, student, difficulty degree, and evaluation domain. Analysis results are presented in various types of Dcube, graphs, and spreadsheets.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2004.04a
• /
• pp.471-477
• /
• 2004

In this study, we introduce a 3-dimensional simulation to support the Design on ACT(Automated Container Terminal). This simulation system developed to simulate virtual operations of ACT using 3-dimensional simulation and animate the simulated results with real time. And the developed system applied an object-oriented design and C++ programming to increase the reusability and extensibility. We select several items of performance evaluation for objects used in ACT in terms of problem detection, problem forecast, and logic feasibility, and provide evaluation points for the design of ACT.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.14 no.2
• /
• pp.8-13
• /
• 2005

This study proposes the construction of 2-3 dimensional attractor system for cutting characteristics evaluation of metals. Also this paper aims to find the optimal cutting conditions of diamond turning machine by measuring surface form and roughness to perform the cutting experiment of metals, which are aluminum, with diamond tool. As well, according to change cutting conditions such as feed rate, using diamond turning machine to perform cutting processing, by measuring cutting force and surface roughness and according to cutting conditions the aluminum about cutting properties. Trajectory changes in the attractor indicated a substantial difference in attractor characteristics. Constructed 2-3 dimensional attractor system in this study can be used for cutting characteristics evaluation of metals.

• International Journal of Human Ecology
• /
• v.7 no.1
• /
• pp.37-52
• /
• 2006

This study was designed to analyze the three-dimensional shapes of Hanbok Chima made with various fabrics and to clarify the relationship between fabric properties as well as the objective and subjective evaluations of the 3D shape. For 3D shape data, a dress form (9A2 (N; nude)) was scanned with eight Chima garments made with the same number of fabrics. The scanner used was a non-contact three-dimensional human body measuring system belonging to Bunka Women's University in Japan. Data concerning the objective evaluation of the 3D shape was obtained from the measurements of the vertical and horizontal sections: those for subjective evaluation were through the sensory test after exposure to photographs from a front and side view. Four fabric factors were extracted from fabric physical properties: softness, extension, thickness of threads, and weight of fabric. Such factors as expansion (volume), sag of rear train, shape of nodes were influential in explaining the 3D shape of Hanbok Chima. From the analysis of the 3D shape, it can be deduced that with the constituent fabric stiffer, lighter, and less stretchable, the more expanded the 3D shape appeared to be. Multiple regression results showed that vertical shape factors have a greater effect on the evaluation of the 3D shape. It also implies that dependent variables of this study such as the subjective evaluation and 3D shape can be derived from regression equations on independent variables as fabric property factors or 3D shape factors. These results can enable the manufacturers to predict the 3D shape of the garment as well as the human subjective assessment to improve the efficacy of production. The investigation method proposed in this study can also be applicable to other garment items.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.11 no.2
• /
• pp.121-131
• /
• 2008

Two dimensional road design is connoting danger factor because different point between design standard and driver's reaction. Consequently two dimensional road design is difficult to recognize problem that happen beforehand when before construction. Therefore three dimensional road design that can grasp problem after completion is required. In this study, three dimensional road was designed to evaluate road that is designed. Road designed by Inroad that is road design program. DTM is created using digital map and elevation data. Three dimensional road was designed by integrated DTM of road and topography. Road design evaluation was performed in three dimension. Driving simulation and sight distance assessment were carried out to estimate stability of alignment. Shadow simulation was executed on icy road section for bad section of icy road surface. As a result of evaluation, this study could confirm shape of road after completion. And sight distance could be calculated and visually confirmed. Also, icy road sections were extracted through shadow simulation.

• The Journal of Engineering Geology
• /
• v.33 no.1
• /
• pp.151-167
• /
• 2023

This study compares the revised method in loose saturated sandy ground where the LNG storage tank will be installed with an evaluation method by one-dimensional effective stress analysis using the UBC3D-PLM model. Various laboratory and field tests were conducted to establish the parameters necessary for evaluation. The revised liquefaction evaluation method using the seismic response analysis result and N value from standard penetration testing evaluated the possibility of liquefaction as high, but assessment using effective stress analysis, which can consider various liquefaction resistance factors, found the site to be somewhat stable against liquefaction. One-dimensional finite element analysis using UBC3D-PLM modeling facilitated easier assessment of stability against liquefaction than the other methods and minimized the area required for reinforcement against liquefaction. In addition, it is expected that two-and three-dimensional numerical analysis considering the foundation of the LNG storage tank can identify the seismic design and behavior when liquefaction occurs.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.11 s.176
• /
• pp.91-98
• /
• 2005

This study has been focused on the development of a high speed feeding type three-dimensional bending machine. It is designed for manufacture of copper pipe for heat exchangers. For the purpose of design of the machine, analysis of bending process, structural analysis and reliability evaluation of the machine by a laser interferometer are carried out. The analysis is carried out by FEM simulation using commercial softwares, DEFORM, MARC and CATIA V5. In addition, the machine has attained high accuracy and repeatability. In order to improve the accuracy of this machine, the maximum speed, positioning accuracy and repeatability of feed are measured by the laser interferometer. The final results of analysis are applied to the design of a high speed feeding type three-dimensional bending machine and the machine is successfully developed.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.44 no.6
• /
• pp.71-82
• /
• 2002

The purpose of this study is to develop a 3 dimensional spatial planning model (3DSPLAM) for facilities allocation and visual evaluation in improvement planning of rural village. For the model development, this study developed both planning layers and a modelling process for spatial planning of rural villages. The 3DSPLAM generates road networks and village facilities location automatically from built area plan map and digital elevation model generated by geographic information system. The model also simulates 3-dimensional villagescape for visual presentation of the planned results. The 3DSPLAM could be conveniently used for automatic allocation of roads, easy partition of land lots and reasonable locating of facilities. The planned results could be also presented in the stereoscopic models with varied viewing positions and angles.