• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2000.10a
• /
• pp.18-23
• /
• 2000

The radar method is becoming one of the major nondestructive testing (NDT) techniques for concrete structures. Numerical modeling of electromagnetic wave is needed to analyze radar measurement results and to study the influence of measurement parameters on the radar measurements. Finite difference-time domain (FD-TD) method is used to simulate electromagnetic wave propagation through concrete specimens. Three concrete specimens with a 19.1 mm rebar embedded at 40 mm, 60 mm, and 80 mm depth are modeled in 3-dimension. As results, 2-D image processing scheme of modeling data has been developed and applied to the imaging of steel bars inside concrete.

• Journal of Information Processing Systems
• /
• v.13 no.4
• /
• pp.852-862
• /
• 2017

In this work a Discrete Cosine Transform (DCT)-based feature dimensionality reduced approach for fingerprint matching is proposed. The DCT is applied on a small region around the core point of fingerprint image. The performance of our proposed method is evaluated on a small database of Bologna University and two large databases of FVC2000. A dimensionally reduced feature vector is formed using only approximately 19%, 7%, and 6% DCT coefficients for the three databases from Bologna University and FVC2000, respectively. We compared the results of our proposed method with the discrete wavelet transform (DWT) method, the rotated wavelet filters (RWFs) method, and a combination of DWT+RWF and DWT+(HL+LH) subbands of RWF. The proposed method reduces the false acceptance rate from approximately 18% to 4% on DB1 (Database of Bologna University), approximately 29% to 16% on DB2 (FVC2000), and approximately 26% to 17% on DB3 (FVC2000) over the DWT based feature extraction method.

• Journal of the Korean Society for Precision Engineering
• /
• v.11 no.3
• /
• pp.105-121
• /
• 1994

In this paper, we proposed the two-parameter model for predicting the residual strength in CFRP laminated composites subjected to high velocity impact and developed and formulated it based upon Cparino's by using the ratio of impact and the normalized residual strength. Critical indentation was obtained by the statical indentation tests. Impact tests were carried out through air-gun type impact equipment with the velocities varied 30-100m/sec. Projectiles were steel balls with 5 and 7mm in diameter. Test material was carbon/epoxy. The specimens were composed of [ .+-. 45 .deg. /0 .deg. /90 .deg. ]$\_$2/ and [ .+-. 45 .deg. ]$\_$4/stacking sequences and had 0.75$\^$T/*0.26$\^$W/*100$\^$L/(mm) dimension. Results from the proposed model were in good agreement with the test data. And failure mechanism due to high velocity impact is given here to examine the initation and deveolpment of damage by fractography and ultrasonic image system. The effects of the 0 .deg. -direction ply position and the amount to damage area on the residual strength are considered here.

• Imaging Science in Dentistry
• /
• v.51 no.3
• /
• pp.323-328
• /
• 2021

Tooth extraction after head and neck radiotherapy exposes patients to an increased risk for osteoradionecrosis of the jaw. This study reports the results of a radiographic analysis of bone neoformation after tooth extraction in a case series of patients who underwent radiation therapy. No patients developed osteoradionecrosis within a follow-up of 1 year. Complete mucosal repair was observed 30 days after surgery, while no sign of bone formation was observed 2 months after the dental extractions. Pixel intensity and fractal dimension image analyses only showed significant bone formation 12 months after the tooth extractions. These surgical procedures must follow a strict protocol that includes antibiotic prophylaxis and therapy and complete wound closure, since bone formation at the alveolar socket occurs at a slower pace in patients who have undergone head and neck radiotherapy.

• Journal of Industrial Convergence
• /
• v.1 no.2
• /
• pp.3-15
• /
• 2003

Many researches have concluded that product advantage or superiority is the most important factor for the commercial success of new products. However, the specific dimensions of product advantage have not been studied as yet. In order to know what kind of product attributes have been major determinants of commercial success, telecommunications winning products from 1985 to 1997 in the Korean market were examined. As results of the analysis, the determinants are classified into function, aesthetics, economy, safety, usability, reliability, brand image, assurance, distribution channel, advertisement, DEF(design for the environment). This study augmented the data set through questionnaire survey to marketing professor in University. The results will be a cue to future of new product development.

• The Journal of Korean Academy of Prosthodontics
• /
• v.59 no.4
• /
• pp.487-496
• /
• 2021

Full mouth rehabilitation is re-organizing the occlusion of the remaining teeth and missing teeth considering the functions, esthetics, and neuromuscular harmony. With the loss of multiple teeth, the patient's occlusal plane gradually collapses and the vertical dimension can be reduced. Since reduced vertical dimension can be a potential etiology of the temporomandibular joint and masticatory muscles, prosthetic restoration with increased vertical dimension is required. This case report is about a 68 years old patient with vertical dimension loss due to worn dentition and multiple loss of teeth. In this case, the loss of vertical dimension is assessed carefully using the digital dentistry technology. Using CAD software in digital analysis step, the occlusal plane was established and evaluated using several criteria. Orienting the position of the bone and teeth using CBCT image, patient's condition was visualized in 3 dimension and treatment planning was possible virtually. The information that matches the patient's condylar position with the articulator, which is the virtual face bow, is reproduced on the actual articulator, and evaluated again. After the evaluation, provisional prosthesis was fabricated and it was confirmed that the patient adapts without any abnormality. This was implemented as a final prosthesis. As a result, the patient obtained satisfying results, utilizing the benefits of digital dentistry technology and traditional methods.

• The Journal of the Korea Contents Association
• /
• v.7 no.4
• /
• pp.206-212
• /
• 2007

To evaluate the HU value of the IV catheter fragment of CT on the accuracy and size in the peripheral vein. Pilot study of profile and table functions on PC by software was calculated of HU value of IV catheter fragment. This study demonstrates the utility of volume rendering technique to localize a small, subtle IV catheter, which can easily be reformatted of MDCT reformations. IV catheter fragment optimal image described as threshold range. Volume rendering of HU using a MDCT is an excellent method for evaluation the IV catheter fragment in three dimension.

• Archives of design research
• /
• v.14 no.3
• /
• pp.155-164
• /
• 2001

Under the ambiguous situation that Id character design aim is not defined, this study would help designers with 1. overcoming the limitation of character form generation ability by establishing visual application system, 2. accepting users'opinions by generating character images dynamically, analysing and giving information on the preferred ones on the web on real time, 3. identifying tendency of preference so that they can generate preferred colors and images in future by updating image combination and dropping low-preferred ones. this system would play a role as an idea or character form generation application in the 3d character design development process

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.10 no.2
• /
• pp.13-20
• /
• 2014

In this paper, we implemented the object scanning with nxtOSEK which is an open source platform. nxtOSEK consists of device driver of leJOS NXJ C/Assembly source code, TOPPERS/ATK(Automotive real time Kernel) and TOPPERS/JSP Real-Time Operating System source code that includes ARM7 specific porting part, and glue code make them work together. nxtOSEK can provide ANSI C by using GCC tool chain and C API and apply for real-time multi tasking features. We experimented the 3D scanning with ultra sonic and laser sensor which are made directly by laser module diode and experimented the measurement of scanning the object by knowing x, y, and z coordinates for every points that it scans. In this paper, the laser module is the dimension of $6{\times}10[mm]$ requiring 5volts/5[mW], and used the laser light of wavelength in the 650[nm] range. For detecting the object, we used the beacon detection algorithm and as the laser light swept the objects, the photodiode monitored the ambient light at interval of 10[ms] which is called a real time. We communicated the 3D scanning platform via bluetooth protocol with host platform and the results are displayed via DPlot graphic tool. And therefore we enhanced the functionality of the 3D scanner for identifying the image scanning with laser sensor modules compared to ultra sonic sensor.

• The KIPS Transactions:PartB
• /
• v.12B no.6 s.102
• /
• pp.715-720
• /
• 2005

This paper presents a hybrid recognition method of first moment of face image and principal component analysis(PCA). First moment is applied to reduce the dimension by shifting to the centroid of image, which is to exclude the needless backgrounds in the face recognitions. PCA is implemented by single layer neural network which has a teaming rule of Foldiak algorithm. It has been used as an alternative method for numerical PCA. PCA is to derive an orthonormal basis which directly leads to dimensionality reduction and possibly to feature extraction of face image. The proposed method has been applied to the problems for recognizing the 48 face images(12 Persons $\ast$ 4 scenes) of 64$\ast$64 pixels. The 3 distances such as city-block, Euclidean, negative angle are used as measures when match the probe images to the nearest gallery images. The experimental results show that the proposed method has a superior recognition performances(speed, rate). The negative angle has been relatively achieved more an accurate similarity than city-block or Euclidean.