• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2002년도 추계학술대회 논문집
• /
• pp.174-180
• /
• 2002

A virtual reality technology for multipurpose numerical simulation is developed to reproduce and investigate a variety of ocean environmental problems in a 3D-Numerical Wave Tank. The governing equations for solving incompressible fluid motion are Navier-Stokes equation and continuity equation, and the Marker-Density function technique is adopted to implement the fully-nonlinear free-surface kinematic condition. The marine environmental situations, i.e. waves, currents, wind, etc., are reproduced by use of multi-segmented wavemaker on the basis of the so-called "snake-principle". In this paper, some numerical reproduction techniques for regular and irregular waves, multi-directional waves, Bull's-eye wave, wave-current, and solitary wave are presented, and a model test in motion with large amplitude of roll angle is conducted in the developed 3D-NWT, using a overlaid grid system.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2006년 창립20주년기념 정기학술대회 및 국제워크샵
• /
• pp.457-460
• /
• 2006

This study is to investigate the variation characteristics of run-up height over sandy beach due to the plane distribution of submerged breakwaters. In this study, Three-Dimensional numerical model with Large Eddy Simulation, which is able to simulate directly WAve Structure Seabed interaction (hereafter, LES-WASS-3D) has been newly developed. A comparison between the numerical model and existing experimental results was made to verify accuracy of newly proposed LES-WASS-3D model, and showed fairly nice agreement. In addition, based on the LES-WASS-3D model, the variation characteristics of run-up height over sandy beach are discussed with relation to the offshore distance and opening width of submerged breakwaters.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 추계 학술발표회
• /
• pp.515-518
• /
• 2010

Horizontal forces may form a major part of the loading system for structures supported on pile groups. It is known that during a strong earthquake, the dynamic behavior of a group-pile foundation is related not only to the inertial force coming from the superstructures but also to the deformation of the surrounding ground. Therefore, it is necessary to understand the behaviors of the group-pile foundations and superstructures during major earthquakes. In this paper, numerical simulation of real-scale group-pile foundation subjected to horizontal cyclic loading is conducted by using a program named as DBLEAVES. In the analysis, nonlinear behaviors of ground and piles are described by cyclic mobility model and axial force dependent model (AFD model). The purpose of this paper is to prove availability of the analysis method by comparing numerical results and test results.

• Journal of Mechanical Science and Technology
• /
• 제17권4호
• /
• pp.606-616
• /
• 2003

A numerical analysis has been conducted in order to simulate the characteristics of complex flow through linear cascades of high performance turbine blade with/without tip clearance by using a pressure-correction based, generalized 3D incompressible Wavier-Stokes CFD code. The development and generation of horseshoe vortex, passage vortex, leakage vortex, tip vortex within tip clearance, etc. are clearly identified through the present simulation which uses the RNG k-$\varepsilon$ turbulent model with wall function method and a second-order linear upwind scheme for convective terms. The present simulation results are consistent with the generally known tendency that occurs in the blade passage and tip clearance. A 3D model for secondary and leakage flows through turbine cascades with/without tip clearance is also suggested from the present simulation results, including the effects of tip clearance height.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2009년도 제33회 추계학술대회논문집
• /
• pp.221-224
• /
• 2009

Since the coupling of cavitation modeling with turbulent flow is the difficulty topic, a numerical simulation for two phase flow remains as one of the challenging issues in the society. This research focuses on the development of numerical code to deal with incompressible two phase flow around conical body combined with cavitation model suggested by Kunz et al. with k-e turbulent model. The simulation results are compared to experimental data to verify the validity of the developed code. The calculation results show very good agreement with experimental observations. Also, the calculation of cavitation in cryogenic fluid is being done by implementing the temperature sensitivity in government equations and it is still in the progress. This code have been being further extended to 3D compressible two phase flow for the study on the fluid dynamics around inducers and impellers in turbo pump system.

• 한국자동차공학회논문집
• /
• 제1권2호
• /
• pp.60-68
• /
• 1993

Flows inside a passenger compartment of a 1/5 scale model vehicle have been simulated by using a general purpose FVM code, TURBO-3D. Three HVAC modes of heating, air-conditioning, and defrosting are simulated by defining three different inlets. Comparisons are made with the published experimental and computational results, giving a good agreement. A method of predicting the defrosting contours on the wind shield is also proposed in the present study, which enables design modifications in design stages.

• 대한토목학회논문집
• /
• 제30권3B호
• /
• pp.325-335
• /
• 2010

본 연구에서는 투수층 매설에 따른 해빈안정화의 효과를 논의하기 위하여, 파 투과성구조물 해빈/해저지반의 상호간섭을 직접해석 할 수 있는 3D-수치모델(LES-WASS-3D; 허동수와 이우동, 2007)을 이용하였다. 이 모델은 투과성구조물 내부의 유체저항으로서 층류저항, 난류저항, 관성저항을 포함하고 있으며 격자 크기보다 작은 와류를 고려하기 위하여 LES기법을 도입하고 있다. 먼저, 기존의 수리모형 실험치와 본 연구의 계산치를 비교 검토하여 이용한 수치모델의 타당성 및 유효성을 검증한 후, 해빈 내부에 투수층을 설치하여 수치시뮬레이션을 실시하였다. 수치실험결과를 통하여 투수층 매설에 따른 평균지하수위의 하강, 이안류 강도의 저하 등, 배수의 메커니즘을 파악한 후, 투수층의 배치형태(평균입경, 두께, 매설깊이, 경사) 및 입사파조건(파고, 주기)에 따른 해빈 내부의 평균지하수위분포에 대하여 고찰하였다.

• Journal of Electrical Engineering and Technology
• /
• 제1권2호
• /
• pp.233-236
• /
• 2006

A 3-D numerical simulation of a buried-channel CCD (Charge Coupled Device) with a deep depletion has been performed to investigate its electrical and physical behaviors. Results are presented for a deep depletion CCD (EEV CCD12; JET-X CCD) fabricated on a high-resistivity $(1.5k\Omega-cm)\;65{\mu}m$ thick epi-layer, on a $550{\mu}m$ thick p+ substrate, which is optimized for X-ray detection. Accurate predictions of the Potential minimum and barrier height of a CCD Pixel as a function of mobile electrons are found to give good charge transfer. The depletion depth approximation as a function of gate and substrate bias voltage provided average errors of less than 6%, compared with the results estimated from X-ray detection efficiency measurements. The result obtained from the transient simulation of signal charge movement is also presented based on 3-Dimensional analysis.

• 한국해양공학회지
• /
• 제37권2호
• /
• pp.68-79
• /
• 2023

Even though submerged breakwater reduces incident wave energy, it redistributes the coastal area's wave-induced current, sediment transport, and morphological change. This study examines the coastal hydrodynamics and the morphological response of a wave-dominated beach with submerged breakwaters installed through field observation and quasi-3D numerical modeling. The pre-and post-storm bathymetry, water level, and offshore wave under storm forcing were collected in Bongpo Beach on the East coast of Korea and used to analyze the coastal hydrodynamic response. Four vertically equidistant layers were used in the numerical simulation, and the wave-induced current was examined using quasi-3D numerical modeling. The shore normal incident wave (east-northeast) generated strong cross-shore and longshore currents toward the hinterland of the submerged breakwater. However, the oblique incident wave (east-southeast) induced the southeastward longshore current and the sedimentation in the northeast area of the beach. The results suggested that the incident wave direction is a significant factor in determining the current and sediment transport patterns in the presence of the submerged breakwaters. Moreover, the quasi-3D numerical modeling is more appropriate for estimating the wave transformation, current, and sediment transport pattern in the coastal area with the submerged breakwater.

• 한국기계가공학회지
• /
• 제6권2호
• /
• pp.52-58
• /
• 2007

This study shows a numerical method to predict automobile type air conditioner tube connector in the forming process. The simulation approach with 3-D FEM program(ABAQUS) for forming process, forming process simulation is in good agrement with it in tendency. Finally, we compared the forming result with simulation. The result of research showed thai forming process technology is promising to produce automobile type air conditioner tube connector.