• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회B
• /
• pp.2708-2712
• /
• 2008

The objective of this work is to study various vortical structures from controlled circular jet such as trifurcating and blooming jets. The numerical simulations of flow from a circular jet are carried out at $Re_D=4300$ based on the jet-exit velocity and jet diameter using large eddy simulation with the dynamic Smagorinsky model in a cylindrical coordinate system. The excitation for the controlled jet is achieved by combining axial and helical excitations. The axial velocity controlled by blowing and suction at the jet exit has several peaks in their cycle with respect to ratio of axial to helical excitations. This active control changes the spreading angle and vortical structures in the downstream region.

• 대한기계학회논문집B
• /
• 제22권7호
• /
• pp.1013-1021
• /
• 1998

Various vortical structures are investigated by using three kinds of flow visualization methods in branch pipe flows. There are two typical flow patterns when a jet from the branch pipe with various angles is injected to the main pipe cross flow. The velocity range of cross flow of the main pipe is 0.2 m/s ~ 1.2 m/s and the corresponding Reynolds number, R$_{p}$ is of the range 1.5 * 10$^{3}$ ~ 9.02 * 10$^{3}$. The velocity ratio(R), jet velocity/cross flow velocity, is chosen from 1.3 to 4. The subsequent behavior and development of the ring vortices which are created at the jet boundary mainly depend on the velocity ratio. An empirical relation for the shedding frequency of the ring vortices is derived. It is also found that there are two different vortex shedding mechanism in the mixing of two fluid streams.s.

• 대한기계학회논문집B
• /
• 제22권11호
• /
• pp.1571-1581
• /
• 1998

A flow visualization study was carried out for the branch pipe mixing flow in which a jet was issued normally to the fully developed pipe flow. An instantaneous laser tomographic method was used for cross flow Reynolds numbers based on the cross flow diameter D ranged $Re_{cf}=5.26{\times}10^3{\sim}1.13{\times}10^4$, diameter ratios d/D = 0.1 ~ 0.2 and velocity ratios R = 0.5 ~ 10. Oil mist with the size of about $10{\mu}m$ diameter was used for the scattering particle. The main purpose of this study was to reveal the physical mechanism and the structure of vortices formation with varying the velocity ratios and diameter ratios in the branch pipe flow. It was found that the physical mechanism and the structures of vortices formation were quite different depending on the velocity ratios. Particularly in the case of R < 1, the typical vortex shows single loop shape and that for the case of R > 1 depicts mushroom-like structure in the cross flow jet.

• 한국지구과학회지
• /
• 제41권6호
• /
• pp.557-574
• /
• 2020

이 연구의 목적은 일기도, 850 hPa 면의 유선, 후방궤적과 기상, 그리고 대기질 모델을 이용하여 비황사기간 동안 청주시 미세먼지 PM2.5의 고농도 원인을 분석하는 것이다. 청주시 PM2.5 고농도 사례일 동안 시계열과 일기도를 분석한 결과, 중국 또는 주변 지역으로부터 PM2.5의 장거리 수송과 관련된 기상 패턴을 나타내었다. 실제로 PM2.5 시계열에서 자체 기여 농도보다 2-3배 이상 증가한 60-80 ㎍ m-3가 장거리 수송과 관련된 배경농도로 관측되었다. PM2.5의 고농도는 대체로 상층 제트류가 한반도를 통과하면서 지상 고기압과 저기압의 발달 위치에 따라 분포하였다. 결과적으로 청주시 PM2.5 고농도 발생 원인은 중국 북경이나 기타 인근 지역에서 산업, 가정 및 에너지 연소 기원으로 발생한 스모그 형태의 대기 오염물질 덩어리가 장거리 수송의 기압배치에 따라 빠른 풍속 대를 타고 이동했기 때문이다. PM2.5를 포함한 대기오염물질이 지상 고기압 확장역이나 절리저기압 또는 지상저기압 배치에 따라 벨트나 띠 형태의 오염 덩어리로 북쪽에서 남쪽으로 청주시 분지 지형을 통과하는 M자형 패턴을 나타내거나, 강줄기 형태의 띠들이 바람의 영향을 받아 U자형으로 변하는 점진적 증가형 패턴으로 나타난다.