• Proceedings of the Korea Information Processing Society Conference
• /
• 2005.11a
• /
• pp.713-716
• /
• 2005

차세대 원자로로 부각되고 있는 고온가스냉각 원자로에서는 고온 안정성 및 핵분열생성물 차단 성능이 우수한 TRISO(Tri-Isotropic) 핵연료를 사용하고 있다. TRISO 핵연료 입자는 직경이 약 1mm인 구 형태로 입자의 중심에는 직경 $0.35^{\sim}0.6\;{\mu}m$의 핵연료 입자가 포함되며 입자 외곽을 코팅 층이 에워 싸고 있다. 이 코팅층은 완충(buffer) PyC 층, 내부 PyC 층, 외부 PyC 층으로 구성되어 있다. 각 코팅 층의 두께를 수십$^{\sim}$백 ${\mu}m$ 범위이며 사양으로 정해져 있어 핵연료 입자 제조 후 사양을 만족하는지를 검사해야 한다. 본 연구에서는 TRISO 핵연료 입자 정보를 컴퓨터로 생성하고 가상의 X-선 래디오그래피 방법을 이용하여 투시 영상을 구성한 후 Filtered Backprojection 기법을 이용하여 단면 영상을 재구성하고 이 단면 영상을 이용하여 코팅 층의 두께를 정밀하게 측정하기 위한 모의 실험을 수행하였다. 경계선이 불명확한 투시영상이 아닌 경계선이 명확한 재구성 단면 영상을 이용하여 코팅 층의 두께를 약 2.3% 이내의 오차율로 정밀하게 측정하였다.

• 방재와보험
• /
• s.53
• /
• pp.68-77
• /
• 1992

한국화재보험협회에는 지난 2월 25일 협회 1층 강당에서 위험성 평가 기법에 대한 위험관리 세미나를 개최했다. 대형 특수건물 소유주 및 화화공장의 관계자, 내무부 및 유관가관, 방재시험연구소의 방재기술 정보회원, 손해 보험회사 임직원 등 3백여 명이 참석한 이번 세미나의 개최 목적은 보험시장 개방과 보험의 국제화에 따라 과학적인 위험관리 기법을 도입해 위험방지와 함께 인수위험을 효율적으로 관리, 보험 회사의 경쟁체제 확립에 기여하기 위한 것이다.

• Geophysics and Geophysical Exploration
• /
• v.11 no.3
• /
• pp.177-183
• /
• 2008

The sub-salt imaging technique becomes more crucial to detect the hydro-carbonates in petroleum exploration as the target reservoirs get deeper. However, the weak reflections from the sub-salt structures prevent us from obtaining high fidelity sub-salt image. As an effort to overcome this difficulty, we applied the waveform inversion by implementing multi-grid technique to the sub-salt imaging. Through the comparison between the conventional waveform inversion using fixed grid and the multi-grid technique, we confirmed that the waveform inversion using multi-grid technique has advantages over the conventional fixed grid waveform inversion. We showed that the multi-grid technique can complement he velocity estimation result of the waveform inversion for imaging the sub-salt structures, of which velocity model cannot be obtained correctly by the conventional fixed grid waveform inversion.

• Journal of the Korean Geotechnical Society
• /
• v.38 no.3
• /
• pp.35-42
• /
• 2022

The N-value from the Standard Penetration Test (SPT), which is one of the representative in-situ test, is an important index that provides basic geological information and the depth of the bearing layer for the design of geotechnical structures. In the aspect of time and cost-effectiveness, there is a need to carry out a representative sampling test. However, the various variability and uncertainty are existing in the soil layer, so it is difficult to grasp the characteristics of the entire field from the limited test results. Thus the spatial interpolation techniques such as Kriging and IDW (inverse distance weighted) have been used for predicting unknown point from existing data. Recently, in order to increase the accuracy of interpolation results, studies that combine the geotechnics and deep learning method have been conducted. In this study, based on the SPT results of about 22,000 holes of ground survey, a comparative study was conducted to predict the depth of the bearing layer using deep learning methods and IDW. The average error among the prediction results of the bearing layer of each analysis model was 3.01 m for IDW, 3.22 m and 2.46 m for fully connected network and PointNet, respectively. The standard deviation was 3.99 for IDW, 3.95 and 3.54 for fully connected network and PointNet. As a result, the point net deep learing algorithm showed improved results compared to IDW and other deep learning method.

• Composites Research
• /
• v.12 no.6
• /
• pp.22-30
• /
• 1999

Since the surface diffusion processed $Nb_3Sn$ superconducting tape has the advantage of having large overall critical current density. it is used for the construction of open type MRI superconducting magnets. However one of the disadvantages of this tape is that $Nb_3Sn$ compound often exhibited multiple cracking due to its intrinsic brittleness when subjected to mechanical loading such as bending and winding during the fabrication process for superconducting coil. This will eventually cause the severe degradation of critical current density. Therefore it is important to understand the microscopic deformation behavior of this kind of superconducting tape under the mechanical loading.In this study, acoustic emission(AE) was used to clarify microscopic deformation behavior at room temperature for $Nb_3Sn$ superconducting tape which was strengthened and stabilized with copper. For this purpose, special attention was paid to AE characteristics including AE event, energy, and amplitude distribution which were associated with microscopic mechanism of deformation of $Nb_3Sn$ superconducting tape under tensile load.

• Journal of Soil and Groundwater Environment
• /
• v.12 no.6
• /
• pp.29-37
• /
• 2007

Shallow alluvial groundwaters in Korea of tell exceed the Korean Drinking Water Standard for dissolved iron (0.3 mg/L), which is one of the important water quality problems, especially in the use of bank infiltration technique. Using the reactive transport modeling, in this study we simulated the effectiveness of injection-and-pumping technique to remove dissolved iron in groundwater. The results of simulation showed that pumping of groundwater after injection of oxygenated water into aquifers is very effective to acquire the permissible water quality level. Groundwater withdrawal up to several times of irjected water in volume can be applicable to yield drinkable water. Potential problems such as clogging and permeability lowering due to in-situ precipitation of iron hydroxides may be insignificant. We also discuss on the mechanism and spatial extent of iron removal in aquifer.

• Geophysics and Geophysical Exploration
• /
• v.10 no.3
• /
• pp.211-218
• /
• 2007

In this study, vertical electrical sounding (VES) data and ordinary kriging are used to identify the alluvial depth of each area that Korea Resources Corporation (KORES) conducted groundwater survey at Miryang area in Gyeongsangnam-do and Pocheon area in Gyeonggi-do from 2003 to 2004. To verify the applicability of VES data to ordianry kriging, regression analysis of VES data versus drillhole data is conducted. Comparing the alluvial depth distributions using ordinary kriging with existing drillhole data, the result shows that the depth distributions are reasonably depicted along with the topography and the basin. So, the ordinary kriging of VES data is useful to identify the alluvial depth distributions.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.8 no.5
• /
• pp.29-38
• /
• 1998

This paper proposes the neural network self-tuning PID controller for the load frequency control of 2- areas power system, namely, the prompt convergence of frequency and tie-line power flow deviation. The neural network applied to computer simulation consists of neurons of two inputs, ten hiddens and tliree outputs layer. Neurons of two inputs layer receive the error and its change rate of the system and cutputs layer consists of three neurons for the parameters of the PID controller. The simulation results shows that the proposed neural network self-tuning PID controller is superior to conventional control t~:chniques(Optimal, PID) in dynamic response and control performance.

• 한국전산유체공학회:학술대회논문집
• /
• 2009.04a
• /
• pp.208-214
• /
• 2009

지하 복수층 주차장은 도시의 밀집화 및 자동차의 급격한 증가로 인한 토지부족 및 주차난을 해소할 수 있는 좋은 방법이다. 하지만 인체유해 배출가스의 집중으로 환기의 중요성이 대두되는 추세에도 불구하고 실제로는 시공이 완료 된 후에나 오염도 측정이 가능하다. 이러한 이유로 CFD 시뮬레이션으로 시공이전의 지하 복수층 주차장의 공기오염도를 예측했다. CFD 시뮬레이션은 예산과 시간을 절감한 공기오염도 예측이 가능하다. 실제의 당산근린공원의 지하주차장을 대상으로 오염도를 예측했다. 급기에만 강제유동을 일으키는 2종과 배기에만 강제유동을 일으키는 3종 기계환기법, 그리고 급배기에 강제유동을 일으키는 1종기계환기법을 각각 적용하여 공기오염도를 계산했다. 지하1층과 지하2층의 입구 및 출구유속을 10, 15m/s로 하여 실내평균연령과 실내평균환기효율을 살펴보았다. 계산결과는 급기와 배기에 강제유동을 동시에 일으키는 1종 기계환기법의 값과 비교하였다.

• Journal of Conservation Science
• /
• v.26 no.3
• /
• pp.269-276
• /
• 2010

This study aims to extract manufacturing techniques by analysing metallurgical characteristics of the cast-iron pot from Bubjusa, examining corrosion status and microstructure with a optical microscope, SEM-EDS, micro vickers hardness tester and XRD. The microstructure analysis has presented that ferrite and partial portion of pearlite exist within the corroded outer layer. The analysis of the inner layer revealed that there is pearlite and graphite of feather shape. The one of the middle layer, which is placed between outer and inner layer, showed that corrosion has been heavily developed. Micro vickers hardness values range from 217Hv to 698Hv in constituent layers and such values lie within the ranges of the ancient iron relics. The result of EDS analysis for each microstructure presented that the outer layer has been more decarbonized than the inner layer. XRD analysis of iron corrosion compound revealed that Goethite and Hematite had been produced from the corrosive process of iron. The study concludes that the large iron pot was made by casting technique, and microstructure of inner layer had a gray cast iron. Outer layer has been decarbonized through repetitive process of heating and cooling. This results can be used as fundamental data for comparative study to reveal manufacturing techniques of large cast-iron pot.