• Title/Summary/Keyword: 3축 특성

Search Result 911, Processing Time 0.031 seconds

5-axis machining with selective three-axis controlled CNC machine (선택적 3축 제어기를 이용한 5축 가공연구)

  • 김성구;서석환;이정재
    • Proceedings of the Korean Society of Precision Engineering Conference
    • /
    • 1996.11a
    • /
    • pp.683-689
    • /
    • 1996
  • 5축 가공기는 가공중의 공구자세 변화를 요구하는 복잡한 산업형상의 가공, 혹은 경사 가공을 통한 표면조도 향상등의 목적으로 채용되는 첨예의 공작기계로서 이를 지원하는 CAM연구가 활발히 이루어지고 있다. 그러나, 산업현장에서 흔히 5축 가공기로 일컬어지는 상당수의 5축 가공기는 기구축은 5축을 가지나, 동기제어 축수는 3측인 “선택적 3/5축 가공기”의 형태로서 진정한 의미의 5축가공기와는 근본적으로 다르다. 5축 동기제어를 지원하는 CAM연구는 부분적으로 연구 개발된 상태이나, 선택적 3/5축을 지원하는 CAM 이론은 연구된 바 없으며, 이에 따라 현장에서는 공작물의 셋업을 변경시키는 소위 자동 인덱싱 방식으로 활용하고 있는 실정이다. 본 연구팀에서는 선택적 3/5축 가공기에서 5축 가공을 실현할 수 있는 공구경로 산출 및 제어알고리즘을 개발하고 있으며, 본 논문에서는 (5축 가공 대비) 선택적 3/5축 가공문제의 이론적 특성과 경사가공을 수행하기 위한 알고리즘을 소개하고 시뮬레이션을 통하여 유효성을 보인다.

  • PDF

Dielectric Properties of $BaTiO_3$ Layer with Zero Shrinkage By Glass Infiltration (Glass Infiltration에 의한 무수축 $BaTiO_3$ Layer의 유전특성)

  • Jang, Ui-kyeong;Shin, Hyo-Soon;Yeo, Dong-Hun;Kim, Jong-Hee
    • Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
    • /
    • 2007.06a
    • /
    • pp.271-271
    • /
    • 2007
  • LTCC 소재는 glass/ceramic composite로 구성된다. LTCC 소재에 embedding 되는 고유전율 소재 또한 이와 같은 소재설계를 통하여 무수축 접합이 가능할 것으로 판단된다. 그러나 이에 대한 연구결과가 보고된바 없고 몇몇 $Al_2O_3$의 infiltration에 대한 무수축 소성 관련 선행 연구를 바탕으로 고유전율 소재인 $BaTiO_3$의 무수축 소성이 연구되는 것이 필요한 시점이다. 따라서 본 연구는 저온에서의 glass infiltration에 의한 무수축 $BaTiO_3$ layer의 저온소성특성 및 유전특성을 평가하였다. 실험결과 $785^{\circ}C$에서 glass의 충분한 침투가 확인되며 결정구조에서는 glass/$BaTiO_3$ composite이 형성되었다. 무수축 접합 layer의 소성조건과 glass 두께 변화에 따른 유전특성 및 layer의 결정구조를 비교평가 하였다.

  • PDF

Study of Two-shaft Rotary Disc UF Module for the Separation of Oil Emulsion (2축 회전판형 UF 모듈의 Oil Emulsion 분리 특성 연구)

  • 김제우;노수홍
    • Membrane Journal
    • /
    • v.6 no.4
    • /
    • pp.219-226
    • /
    • 1996
  • Rotary disc ultrafiltration module(RDM) was developed for the separation of oil emulsions. This module was devised to reduce the gel polarization phenomenon by alecoupling the operation pressure and the surface velocity of solution in ultrafiltration(UF) processes. Two-shaft engaged disc type RDM having 20 rotary disc membcanes(UOP, USA) was operated under 85kPa vacuum at $25^{\circ}$C. The pressure drop due to slip flow in the two-shaft RDM was found to be proportional to $(2.5{\omega}r)^{2}$. The pure water flux of two-shaft RDM decreased by 9.95% at the angular velocity of 41.89rad/s compared to the decrease of 3.01% for one-shaft RDM at the same velocity. When the angular velocity was changed from 31.42rad/s to 2.62rad/s, the flux decline for 1% cutting oil in two-shaft RDM was 30.16% that is similar to that of one-shaft RDM. Disc gap of 3mm and 7mm did not show any significant differences in the flux for 1% cutting oil solution. A modified model for two-shaft RDM showed good agreement with the experimental results for the cutting oil solution.

  • PDF

Structural and Electrical Transport Properties of CuCr1-xNixO2 by Pulsed Laser Deposition

  • Kim, Se-Yun;Seong, Sang-Yun;Chu, Man;Jo, Gwang-Min;Hong, Hyo-Gi;Lee, Jun-Hyeong;Kim, Jeong-Ju;Heo, Yeong-U
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 2010.08a
    • /
    • pp.210-210
    • /
    • 2010
  • ABO2 형태를 가진 delafossite 구조 산화물은 p-type 투명전도체 소재로 유명하다. Delafossite 구조가 p-type 투명전도체에 적합한 결정적인 이유는 밴드갭이 넓고 공유결합에 유리하기 때문이다. 투명전도체는 가시광선의 흡수가 없도록 band gap을 넓히는 것이 우선인데 이러한 band gap이 넓은 구조가 delafossite이다. 또한 delafossite 구조는 구조적으로 각각의 산화물 이온들이 유사 사면체 배위(pseudo-tetrahedral coordination)을 갖는다. 이러한 사면체 배위결합구조에서 산소이온은 비결합면이 없기 때문에 더욱더 공유결합성을 향상시킬 것으로 생각된다. 여기서 A는 +1가 cation, B은 +3가 cation으로 구성되어 있다. A자리에는 1가 원소인 팔라듐, 플래티늄, 은, 구리 등을 가질 수 있고. B자리에 3가 원소이면서도 크기가 알루미늄보다는 크고 란타늄보다는 작은 금속이 들어갈 수 있다. Delafossite 구조는 상온에서 2종류의 polytype (상온에서 Rhombohedaral 구조와 hexagonal 구조)이 존재하며 이들은 각각 3R(Rm) 및2H (P63/mmc)의 결정 구조를 가지고 있다. CuCrO2는 일반적으로 3R결정구조를 가지는 것으로 알려져 있다. delafossite 구조는 전기적 이방성을 띄고 있는데 c-축 방향으로의 전기적 특성이 a-축 방향으로의 전기적 특성보다 약 1000배 높은 물성을 띈다고 한다. 이는 c-축 방향의 원자 위치 때문인데 CuCrO2의 경우 Cu-O-Cr-O-Cu로서 3d-2p-3d-2p-3d 궤도를 가지기 때문인 것으로 알려져 있다.[ref] 반면 c-축으로 에피성장된 박막의 경우 +3가 이온이 위치한 layer에서 hole hopping에 의해 캐리어가 전도된다고 알려져 있기도 하다. 본 연구에서는 PLD를 이용하여 c-plane 사파이어 기판위에 성장된 delafossite구조인 CuCrO2박막의 특성을 알아보았다. p-type 특성을 위하여 CuCrO2에 Ni를 첨가하였으며 그에 따른 구조적 전기적 특성을 조사하였다. 성장온도와 도핑농도를 변화시켜 특성을 연구하였다. 결정구조적 특성과 전기적 특성을 분석하려 한다.

  • PDF

Three Axis Isotropic Field Strength Measuring Antenna (3축 등방성 전계강도 측정 안테나)

  • Choi, Suk-Hwan;Kim, Dong-Seok
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.25 no.9
    • /
    • pp.879-885
    • /
    • 2014
  • In this paper, we designed and fabricated wideband 3-axis isotropic antenna for the Electro-Magnetic Fields(EMFs) measurement. Each part of proposed 3-axis antenna has isotropic characteristics and arbitrary axis of proposed 3-axis antenna could be selectable using RF switch. Also, a resistor was inserted in each axis of proposed 3-axis antenna for improving antenna gain and noise suppression characteristics, and port impedance of each dipole antenna were matched by balun. For the performance verification of antenna, GTEM Cell which generates standard electromagnetic field was used for the derivation of antenna factor and receiver sensitivity. As a result, fabricated 3-axis isotropic antenna has receiver sensitivity of 0.12~4.2 mV/m and typical VSWR of 3.3:1 within a wide operation frequency range from 0.03 MHz to 3 GHz.

Experimental Study on the Flow-field and the Atomization Characteristics of Gas-liquid phase Coaxial Jet (기액동축 분류의 유동장 및 미립화특성에 관한 연구)

  • 전흥신;김형택
    • Journal of Energy Engineering
    • /
    • v.4 no.3
    • /
    • pp.394-401
    • /
    • 1995
  • 본 연구는 중심부에 액체, 외주부에 산화제가 흐르는 기액 동축분류의 유동장에 대한 것이다. 기액 동축 분사기는 연료의 분사량이 적은 소형 연소시스템을 고려하여, 실험은 연공비(W1/Wa)가 0.6 이하를 대상으로, 물과 공기를 사용하여 분사조건에 따른 분무특성과 기액 2상 분무류의 기본구조를 조사하여 액적의 확산, 기액혼합특성에 대하여 검토하여 다음과 같은 결론을 얻었다. 반경방향 기상속도분포 및 액적유속분포는 분구직경 및 분사조건에 관계없이 정규분포에 가까운 형태를 취하고 있으며, 각각 식 (2) 및 (3)으로 나타낼 수 있다. 기상속도는 반치폭은 축방향에 따라 일정한 구배 (≒4.6)로서 증가하며, 기상만의 단상분류의 구배(≒6)에 비해서 완만하다. 액적유속 반치폭은 축방향에 따라 더욱 완만한 구배(≒3.1)로서 증가한다. 무차원 액적유속분포는 축방향에 따라 일정한 구배(n≒1.5)로서 감소한다. 액적의 확산은 상대적으로 기액유량비가 클수록 효과적으라고는 말할 수 없고, 최대 확산을 이루는 최적의 기액유량비가 존재한다.

  • PDF

Construction of Measuring System for Magnetic Properties Measurement of Azimuth Angle Sensor (방위각센서의 자기특성 측정 장치 제작)

  • Son, Derac
    • Journal of the Korean Magnetics Society
    • /
    • v.24 no.1
    • /
    • pp.22-27
    • /
    • 2014
  • North indicating azimuth angle sensors have been used in airplanes, ships traditionally and nowadays employed in smart phones. For the azimuth and roll angle measurement of the sensor, 3-axis acceleration sensor was added to the 3-axis magnetic field sensor. In this work, we have constructed a measuring system for the measurement of the magnetic field and the angle uncertainty of the magnetic field sensors. Measuring system could be useful not only in non-magnetic laboratory but also in normal laboratory, we constructed small size of 3-axis Helmholtz coils for the compensation environment magnetic field (Earth magnetic field and magnetic field from building) and the generation of magnetic field for the test of magnetic field sensor. The constructed measuring system could compensate environment magnetic field below 10 nT level and generate 3-dimensional magnetic field with magnitude uncertainty of 0.2 % and angle error of $0.2^{\circ}$ within the volume of ${\pm}30mm$ diameter at center of Helmholtz coils. For the conformation of developed measuring system, We tested commercially available 3-axis magnetometer and heading sensor.

3축 가속도 센서 기반 인간 행동 인식을 위한 기계학습 분석

  • Lee, Song-Mi;Jo, Hui-Ryeon;Yun, Sang-Min
    • Information and Communications Magazine
    • /
    • v.33 no.10
    • /
    • pp.65-70
    • /
    • 2016
  • 최근 스마트폰의 이용 사례가 증가함에 따라, 스마트폰에 내장되어 있는 다양한 센서를 이용하여 인간의 행동을 인식하기 위한 연구가 많은 각광을 받고 있다. 본고에서는 인간의 기본적인 행동 중에 앉기, 걷기, 달리기 등의 행동 특성을 스마트폰에 내장되어 있는 3축 가속도 센서를 통하여 분석하고 인간의 기본적 행동을 자동으로 인식하기 위한 방법에 대하여 비교 분석하는 것을 목적으로 한다. 구체적으로는 스마트폰에 내장되어 있는 3차원 가속도 센서로부터 추출된 데이터를 시간축에서 샘플링하여 인간의 행동을 인식하기 위한 기댓값 최대화 알고리즘, 랜덤 포레스트, 딥러닝 기반의 기계학습 방법을 비교하여 각 기계학습 알고리즘의 장단점을 분석한다.

A Numerical Study on a Supersonic Turbine Performance Characteristics with Different Nozzle-Rotor Axial Gap Spacings (노즐-로터 축간극 거리에 따른 초음속 터빈 내의 성능특성에 대한 수치적 연구)

  • Jeong, Sooin;Choi, Byoung-ik;Kim, Kuisoon
    • Journal of the Korean Society of Propulsion Engineers
    • /
    • v.19 no.3
    • /
    • pp.29-38
    • /
    • 2015
  • In this study, 3-dimensional URANS simulation was performed to analyze the effect of the nozzle-rotor axial gap spacing of a supersonic impulse turbine on turbine performance. The computations were conducted for four different axial gap cases corresponding to about 6%, 10%, 20% and 30% of the blade height, respectively. The results show a good agreement with previous studies and the turbine efficiency decreases drastically in certain range. It is examined that the turbine performance characteristics could change depending on the influence of leading edge shock to the nozzle outlet. It is also found that the entropy rise distributions along the span differ from each other.

3 Dimensional Pulse Detector Using SMA Connector (SMA 커넥터를 이용한 3축 펄스 탐지기)

  • Lee, Sangsu;Park, Yong Bae
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.28 no.9
    • /
    • pp.707-712
    • /
    • 2017
  • In this paper, the performance characteristic of 3 dimensional pulse detector using SMA connector is analyzed. Modeling of 3D pulse detectors is done in a commercial simulator. When a pulse is incident on the detector, we analyze the performance characteristics of the detector and verify the feasibility of the pulse detector.