• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2010.04a
• /
• pp.301-306
• /
• 2010

Recently GIS is not only displaying and servicing data on the 2D, but also is changing rapidly to display and service 3D data. Also 3D related technology is developing actively. For display of 3D data, terrain DTM has become a basis. Generally, to acquire DTM, users are using LIDAR data or digital map's contour line. However, if using these data for producing DTM, users need to additional cost and data lead time. And hard to update terrain data. For possibility of solving these problem, this study did DTM extraction with automatic matching for aerial photograph, and analysed the result with measurement of Orthometric height and excuted accuracy through DTM(which extracted from digital photogrammetric technique). As a result, we can get a high accuracy of RMSE (0.215m).

• Journal of the Mineralogical Society of Korea
• /
• v.30 no.1
• /
• pp.1-9
• /
• 2017

This study investigated the effectiveness of Unmanned Aerial Vehicle (UAV) and 3D modeling on mine reclamation monitoring. The high spatial resolution of 3.8 cm ortho-mosaic image and Digital Elevation Model (DEM) are constructed based on UAV air survey. The ortho-mosaic image effectively shows mine reclamation activities and recognize objects and topological changes in the image. The comparative analysis of 3D models between UAV based DEM and report based DEM reveals that total amount of $268,672m^3$ additional dumping of contaminated soil is equivalent to 710,000 ton. It concludes that a UAV based survey enables high accuracy spatial information extraction for mine reclamation activities with high efficiency. It is expected that UAV survey will be very effectively used for preliminary data acquisition and project monitoring for mine reclamation activities.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.32 no.3
• /
• pp.168-182
• /
• 2014

Several Sungsi Gardens were built up in Old West Village during the period of the Joseon Dynasty. Most of them were painted as True-View landscape painting. This study aims at examining original locations of representative gardens of the Old West Village by empirical investigation of related True-View landscape paintings. It seeks to demonstrate the garden landscape in True-View landscape painting by utilizing ArcGIS, 3D topographic modeling to observe geographical locations and landscape more realistically. After forming 3D topographic modeling of estimated locations of the gardens, location of objects at composition of 3D modeling similar to True-View landscape painting was found by shifting viewpoints. And by overlapping the cadastral map on the modeling, we could verify the current lot number of the garden sites. The interpretation of processes and results are as follows. In the early stage, Chungpunggye garden was built at the very end of Mt. InWang valley. The site is hidden from the outside, and appeared as 'Enclosed Landscape'. In the middle stage, Chunghuigak garden was built between Okryu-dong valley and the surrounding ridge. It appeared as 'Semi-Opened Landscape'. In the late stage, Seowon garden was built at the highest level of the ridge among the research areas. It appeared as 'Prospective Landscape'. In the last period, Songsukwon garden, was built at a point of contact of the ridge end and surrounding residential area. So it appeared as 'Opened Landscape' to the town. In other words, the location, landscape and social function of the gardens in Old West Village had been gradually opened in Joseon Dynasty.

• Journal of Korean Society for Geospatial Information Science
• /
• v.12 no.4 s.31
• /
• pp.27-33
• /
• 2004

Recently, as a part of NGIS project, cultural-assets digital map is produced by cultural properties administration and local autonomous entities. Cultural-assets unified GIS(Geographic Information System) is essential to cultural properties managers md other organizations which are executing land related business for appling it at planning stage. With explosive national land developments, it has been obligated to implement surface survey by the cultural properties protection Art. In this paper, the authors used the district of Sachon city and made 3D terrain model using digital map which is made of 1/5000 stale. Moreover, the authors improved to RDBMS(Relational Database Management System) structure and remodeled the existing DB design in detail, and also tried recovery of past sea level, based on researches about the water level of southern area. By recover past sea level. the shell mound, apart from lever is actually near lever at past, and it make sure its nature. The authors suggested to realize shape and kind of remains which have 3D information of accuracy and actualization from surface-surveying to excavation.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.38 no.1
• /
• pp.43-48
• /
• 2020

Open pit mines for limestone mining require rapid development of technologies and efforts to prevent safety accidents due to rapid deterioration of the slope due to deforestation and rapid changes in the topography. Accurate three-dimensional spatial information on the terrain should be the basis for reducing environmental degradation and safe development of open pit mines. Therefore, this study constructed spatial information about open pit mine using UAV(Unmanned Aerial Vehicle) and analyzed its utility. images and 3D laser scan data were acquired using UAV, and digital surface model, digital elevation model and ortho image were generated through data processing. DSM(Digital Surface Model) and ortho image were constructed using image obtained from UAV. Trees were removed using 3D laser scan data and numerical elevation models were produced. As a result of the accuracy analysis compared with the check points, the accuracy of the digital surface model and the digital elevation model was about 11cm and 8cm, respectively. The use of three-dimensional geospatial information in the mineral resource development field will greatly contribute to effective mine management and prevention of safety accidents.

• The Bulletin of The Korean Astronomical Society
• /
• v.43 no.1
• /
• pp.72.4-73
• /
• 2018

북극 스발바르의 사면 지형에는 걸리가 발달되어 있다. 이러한 걸리는, 그 성인에는 여러 의견이 있으나, 화성에도 중고위도를 중심으로 다수 분포한다. 화성의 걸리는 2000년대에 들어 비로소 본격적으로 규명되고 있으나, 지형적 특성으로 인한 탐사의 한계로 지구에 분포하는 유사지형을 통한 비교 연구가 일반적이다(Costard, et al. 2007 등). 이 연구에서는 스발바르의 주도 롱이어비엔에서 UAV을 이용하여 획득한 DEM으로 스발바르 걸리를 측량하고, 이를 화성 중위도의 테라 사이메리아, 테라 시레넘, 노아 키스 테라에 분포하는 걸리와 비교하였다. Longyearbreen 빙하 전방에 위치한 사면을 UAV로 촬영하고, 이를 SfM-MVS(Structure from Motion & MultiView Stereo) 기법으로 3차원 점군 모델과 고해상도 DEM을 제작하여 분석하였다. 화성의 경우 MRO궤도 탐사선이 촬영한 HiRise DTM을 이용하여 분석하였다. 두 걸리는 기후와 지질 조건에 차이가 있음에도 불구하고 유사한 패턴을 보였다. 특히 테라 사이메리아에 위치한 걸리와 롱이어비엔 북사면의 걸리는 기준거리, 단면적, 폭, 경사, 제방 두께 등에서 상당한 정량적 유사관계가 있었다. 이는 두 행성의 걸리가 유사한 성인 및 형성 프로세스를 거쳤을 가능성을 시사한다. 측량 기법과 UAV 의 안정성을 개선시키면 지형 모델의 품질 향상 및 극지에서의 UAV 운용이 용이해질 것으로 기대된다. 또한 스발바르의 기후 요소 및 물리량 적용은 향후 화성 지형연구에도 응용할 수 있을 것으로 사료된다.

• Journal of Korean Society for Geospatial Information Science
• /
• v.17 no.3
• /
• pp.97-107
• /
• 2009

Experiments using real guided weapons for the development of the LADAR(Laser radar) are not practical. Therefore, we need computing environment that can simulate the 3D detections by LADAR. Such simulations require dealing with large sized data representing buildings and terrain over large area. And they also need the information of 3D target objects, for example, material and echo rate of building walls. However, currently used 3D models are mostly focused on visualization maintained as file-based formats and do not contain such semantic information. In this study, as a solution to these problems, a method to use a spatial DBMS and a 3D model suitable for LADAR simulation is suggested. The 3D models found in previous studies are developed to serve different purposes, thus, it is not easy to choose one among them which is optimized for LADAR simulation. In this study, 4 representative 3D models are first defined, each of which are tested for different performance scenarios. As a result, one model, "Body-Face", is selected as being the most suitable model for the simulation. Using this model, a test simulation is carried out.

• Korean Journal of Construction Engineering and Management
• /
• v.22 no.4
• /
• pp.29-40
• /
• 2021

Recently, interest in Building Information Modeling (BIM) has increased globally, and 3D modeling is a start for the application of BIM at construction sites. However, while many studies have been conducted on the efficiency of 3D modeling focused on civil facilities, there is a lack of research on the earthwork BIM. In particular, since 3D slope often has complex shapes depending on the ground models, the efficiency method for 3D slope are needed. This study analyzed the interfaces and procedures of other software to find out what functions users need. Then the functions to enter intervals between 3D faces, select multiple ground models, and improve the interface are reflected on the developed system and is able to efficiently perform modeling with only five steps, and reduce the number of clicks and inputs. As a result of conducting the test to verify the efficiency, using the developed system made skilled users complete modeling at least 1.8 times faster and unskilled people at least 2.4 times faster than using other software. This is expected to perform 3D slope modeling more efficiently, as well as to contribute to the activation of future BIM adoption for housing construction projects.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.10
• /
• pp.197-205
• /
• 2020

Compared to aerial photogrammetry, UAV photogrammetry has advantages in acquiring and utilizing high-resolution images more quickly. The production of 3D models using UAV photogrammetry has become an important issue at a time when the applications of 3D spatial information are proliferating. Therefore, this study assessed the feasibility of utilizing 3D models produced by UAV photogrammetry through quantitative and qualitative analyses. The qualitative analysis was performed in accordance with the LODs (Level of Details) specified in the 3D Land Spatial Information Construction Regulation. The results showed that the features on planes have a high LoD while features with elevation differences have a low LoD due to the occlusion area and parallax. Quantitative analysis was performed using the 3D coordinates obtained from the CPs (Checkpoints) and edges of nearby structures. The mean errors for residuals at CPs were 0.042 m to 0.059 m in the horizontal and 0.050 m to 0.161 m in the vertical coordinates while the mean errors in the structure's edges were 0.068 m and 0.071 m in horizontal and vertical coordinates, respectively. Therefore, this study confirmed the potential of 3D models from UAV photogrammetry for analyzing the digital twin and slope as well as BIM (Building Information Modeling).

• Journal of Korea Water Resources Association
• /
• v.39 no.1 s.162
• /
• pp.69-77
• /
• 2006

Songdo beach in Pohang City has suffered from bouts of beach erosion due to various reasons over many years. One of the most controversial issues is the extent of the harbor facilities effect on the beach erosion. In this study, the characteristics of erosion to Songdo beach were reanalysed using historical data and some aerial photos. Specifically, we set test cases based on the history of human modifications to the surrounding area and the topographic change around Songdo beach were investigated by 3D topographical deformation model. In the end, based on the results of these various kinds of investigation, this study found multiple causes of Songdo beach erosion.