• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1850_1851
• /
• 2009

본 논문에서는 스테레오 카메라를 이용한 대상물체의 3차원 정보 추출 및 가시화를 위하여 우선적으로 실시해야 하는 카메라 대한 렌즈 왜곡 보정 및 3차원 자세 보정알고리즘의 적용에 대하여 살펴보았으며, 렌즈의 왜곡 보정 부분에서는 렌즈의 구면 수차로 인한 왜곡은 각 카메라에 대하여 패턴 영상을 획득한 후 렌즈왜곡보정계수를 산출하여 왜곡 보정 실시하였다. 더불어 보정을 통하여 보다 입체감 있는 영상의 출력이 가능함을 확인할 수 있었다.

• 한국HCI학회:학술대회논문집
• /
• 2008.02a
• /
• pp.595-600
• /
• 2008

본 논문에서는 위성영상 기반의 3차원 문화재 정보 시스템을 구현하기 위한 과정으로 고 해상 위성영상 제작을 위한 DEM(Digital Elevation Model)제작단계와 위성영상 자료를 수집하여 영상이 지니고 있는 왜곡을 보정하는 자료보정 단계, 사용 목적에 맞게 영상을 가공하여 저장하는 영상 생성단계를 통해 위성영상 기반의 3차원 지형정보를 생성하고, 3차원 스캐너를 활용한 대상지역 문화재의 DB 구축과 3차원 복원을 통해 3차원의 문화재 정보를 획득하고 질감 및 재질 사실적인 면을 강조하기 위한 텍스처 맵핑 과정을 통해 3차원 공간적인 조건 및 검색을 가능하게 함으로써 언제 어디서 든 누구나 쉽게 문화재에 대한 정보를 검색할 수 있도록 Web3D를 활용한 3차원 문화재 정보 시스템을 구현하였다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.4
• /
• pp.948-958
• /
• 2010

Human body signals collected by the MRI system are very weak, such that they may be easily affected by either external noise or system instability while being imaged. Therefore, this paper analyzes the nonuniformity caused by a design of the RF receiving coil in a low-magnetic-field MRI system, and proposes an efficient method to improve the image uniformity. In this paper, a method for acquiring 3D bias volume data by using phantom data among various methods for correcting such nonuniformity in MRI image is proposed, such that it is possible to correct various-sized images. It is shown by simulations that images obtained by various imaging methods can be effectively corrected using single bias data.

• Journal of the Institute of Convergence Signal Processing
• /
• v.4 no.3
• /
• pp.27-33
• /
• 2003

The image-based 3D modeling is the technique of generating a 3D graphic model from images acquired using cameras. It is being researched as an alternative technique for the expensive 3D scanner. In this paper, we propose the image-based, 3D modeling system using calibrated stereo cameras. The proposed algorithm for rendering, 3D model consists of three steps, camera calibration, 3D reconstruction, and 3D registration step. In the camera calibration step, we estimate the camera matrix for the image aquisition camera. In the 3D reconstruction step, we calculate 3D coordinates using triangulation from corresponding points of the stereo image. In the 3D registration step, we estimate the transformation matrix that transforms individually reconstructed 3D coordinates to the reference coordinate to render the single 3D model. As shown the result, we generated relatively accurate 3D model.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.46 no.3
• /
• pp.1-9
• /
• 2009

Using the projected 2-dimensional tilted images obtained from the transmission electron microscopy, we can reconstruct the 3-dimensional structures of objects, such as cells. As a preprocessing procedure, the tilted images should be registered and compensated in terms of the spatial position and the intensity difference, respectively. In this paper, we employ the fiducial marker-based approach to perform a registration, and introduce a simple intensity compensation scheme. Based on the transmissivity image formation model, we propose an algorithm that can compensate the components of the illumination and transmissivity of each image according to the tilted angle. Numerical analysis using real images obtained from the transmission electron microscopy are shown in this paper to show the performance of the proposed algorithm.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.1
• /
• pp.504-507
• /
• 2005

In this paper, we propose a calibration technique of 3D coordinates using orthogonal stereo vision. First, we acquire front- image and upper- image from stereo cameras with real time and extract each coordinates of a moving object using differential operation and ART2 clustering algorithm. Then, we can generate 3D coordinates of that moving object through combining these two coordinates. Finally, we calibrate 3D coordinates using orthogonal stereo vision since 3D coordinates are not accurate due to perspective. Experimental results show that accurate 3D coordinates of a moving object can be generated by the proposed calibration technique.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.1C
• /
• pp.36-45
• /
• 2006

In this paper, multiview calibration system for an effective 3D display is proposed. This system can be obtain 4-view image from multiview camera system. Also it can be rectify lens and camera distortion, error of bright and color, and it can be calibrate distortion of geometry. In this paper, we proposed the signal processing skill to calibrate the camera distortions which are able to take place from the acquisited multiview images. The discordance of the brightness and the colors are calibrated the color transform by extracting the feature point, correspondence point. And the difference of brightness is calibrated by using the differential map of brightness from each camera image. A spherical lens distortion is corrected by extracting the pattern of the multiview camera images. Finally the camera error and size among the multiview cameras is calibrated by removing the distortion. Accordingly, this proposed rectification & calibration system enable to effective 3D display and acquire natural multiview 3D image.

• The KIPS Transactions:PartB
• /
• v.17B no.3
• /
• pp.215-226
• /
• 2010

The structured-light 3D reconstruction technique uses a coded-pattern to find correspondences between the camera image and the projector image. To calculate the 3D coordinates of the correspondences, it is necessary to calibrate the camera and the projector. In addition, the calibration results affect the accuracy of the 3D reconstruction. Conventional camera-projector calibration techniques commonly require either expensive hardware rigs or complex algorithm. In this paper, we propose an easy camera-projector calibration technique. The proposed technique does not need any hardware rig or complex algorithm. Thus it will enhance the efficiency of structured-light 3D reconstruction. We present two camera-projector systems to show the calibration results. Error analysis on the two systems are done based on the projection error of the camera and the projector, and 3D reconstruction of world reference points.

• Proceedings of the Korean Information Science Society Conference
• /
• 2011.06b
• /
• pp.294-295
• /
• 2011

본 논문에서는 스마트폰의 카메라와 플래시를 이용한 Shape from Shading 방법으로 3차원 형상 취득을 위한 카메라와 플래시의 보정 기법을 제시한다. 영상에서 관찰되는 화소 값은 카메라의 반응곡선에 의해 비선형적으로 표현되고 렌즈의 왜곡으로 인해 3차원 형상 복원에 오차를 발생 시킨다. 기하학적(geometric) 보정과 방사량(radiometric) 보정, 플래시 보정을 수행함으로써 3차원 형상 복원의 오차를 줄인다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2000.04b
• /
• pp.595-597
• /
• 2000

3차원 정보의 올바른 정합을 위해서 3차원 정보 자신 뿐만이 아니라 3차원 정보와 연관된 영상 정보를 이용한다. 먼저 영상의 정합을 수행함에 있어 서로 다른 두 영상간에 상관 윈도우를 씌워 상관계수를 계산하여 최적 정합점을 탐색한다. 본 논문에서는 카메라의 서로 다른 관점으로 인한 상관위도우의 뒤틀림을 3차원 초기 변환 행렬을 이용하여 보정하는 방법을 제안하고, 이에 의해 3차원 변환된 상관 윈도우를 정합에 이용함으로서 상관계수의 정확도를 급격히 향상시킨다. 그 결과로 개선된 특징점 정합 결과로부터 영상 전반에 걸친 3차원 특징점 정합을 통해 이와 대응하는 3차원 정보의 정확한 정합 결과를 얻는다.