• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2010.07a
• /
• pp.201-204
• /
• 2010

물체 인식 및 추적 기술은 기계가 영상 정보를 기반으로 주변을 인지하고 정황을 파악하는 컴퓨터 비전 분야의 매우 중요한 연구 영역 중 하나이다. 현재까지 이러한 물체 인식/추적에 대한 다양한 연구들이 있어 왔고, 최근 증강현실에 대한 높은 관심을 바탕으로 증강현실을 위한 영상 정보 기반의 정확하고 정교한 추적 기술에 대한 관심 또한 매우 높아졌다. 본 논문에서는 텍스쳐가 없는 단색의 블록에 대해 증강현실을 실현하기 위한 물체 추적 방식을 제안한다. 제안하는 방식은 다수의 블록들을 조합하여 구성하고, 이 조합으로부터 추출한 특징점에 색상 정보 기반의 지역 서술자를 정의함으로써 사전에 정의된 서술자와 의 비교를 통해 물체를 추적하는 방식이다. 제안된 추적 방식은 사전에 기준이 되는 지역 서술자를 정의함에 있어서 기준 영상에 다양한 어파인 변환을 적용함으로써 카메라와 대상물과의 각도가 큰 입력 영상에 대해서도 추적에 실패하지 않는다. 실험을 통해 제안된 방식을 집 모양으로 구성한 블록 조합에 적용하여 3차원 가상 콘텐츠를 증강시켜 봄으로써 제안된 방식의 유용성을 확인하였다. 제안된 방식은 텍스쳐가 없는 환경에서 사용자의 상호작용으로 텍스쳐를 구성하고 이를 추적하는 방식으로 향후 아이들을 위한 교육 프로그램, 모바일 기기에서의 응용 프로그램 등으로 적용 가능하다.

• Korean Journal of Optics and Photonics
• /
• v.14 no.1
• /
• pp.51-57
• /
• 2003

The hologram of an object contains the information of the object's depth distribution as well as the depth location of the object. However these pieces of information are blended together as a form of fringe pattern. This makes it hard to extract the depth location of the object directly from the hologram. In this paper, I propose a numerical method which separates the depth location information from the single-sideband hologram by gaussian low-pass filtering. The depth location of the object is extracted by numerical analysis of the filtered hologram. The hologram at the object's depth location is recovered by the extracted depth location.

• Journal of the Korea Computer Graphics Society
• /
• v.3 no.2
• /
• pp.77-84
• /
• 1997

Solid modeling refers to techniques for unambiguous representations of three- dimensional objects. The most widely used techniques for solid modeling have been Constructive Solid Geometry (CSG) and Boundary Representation (BRep). Contemporary solid modeling systems typically support both representations, and bilateral conversions between CSG and BRep are essential. However, computing a CSG from a BRep is largely an open problem. This paper presents 3D geometric reasoning algorithms for converting a BRep into a special CSG, called Destructive Solid Geometry (DSG) whose Boolean operations are all subtractions. The major application area of BRep-to-DSG conversion is feature recognition, which is essential for integrating CAD and CAM.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.8
• /
• pp.1698-1706
• /
• 1997

In this paper, we envisioned a multimedia object recognition system processing and combinig information from all available sources, such as 2-D, 3-D, color and sound data. Out of the overall system, we proposed 3-D information extraction and object recognition methods. Firstly, surfaces are classified by z-gradient from the range data, surface features are extracted using the intersection of normal vectors. Also feature relationship such as intersection angle and distance is established between the surfaces. Secondly, recognition is accomplished by matching process which is improtant step in the image understanding systems. Matching process is very improtant procedures because of more general and more efficient method is needed in the field of multimedia sytem. Therefore, we focused the proposal of matching process and in this article, first of all, we deal with the matching process of the 3-D object. Similarity measures are calculated.

• 한국HCI학회:학술대회논문집
• /
• 2008.02a
• /
• pp.210-214
• /
• 2008

It is actually impossible to model and store all objects which exist in real home environment into robot's database in advance. To resolve this problem, this paper proposes new object modeling method that can be available for robot self-modeling, which is capable of estimating whole model's shape from partial surface data using Generic Model. And this whole produce is conducted to cylindrical objects like cup, bottles and cans which can be easily found at indoor environment. The detailed process is firstly we obtain cylinder's initial principle axis using points coordinates and normal vectors from object's surface after we separate cylindrical object from 3D image. This 3D image is obtained from 3D sensor. And second, we compensate errors in the principle axis repeatedly. Then finally, we do modeling whole cylindrical object using cross sectional principal axis and its radius To show the feasibility of the algorithm, We implemented it and evaluated its accuracy.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.12
• /
• pp.150-157
• /
• 2015

Pedestrian detection has largely been researched as one of the important technologies for autonomous driving vehicle and preventing accidents. There are two categories for pedestrian detection, camera-based and LIDAR-based. LIDAR-based methods have the advantage of the wide angle of view and insensitivity of illuminance change while camera-based methods have not. However, there are several problems with 3D LIDAR, such as insufficient resolution to detect distant pedestrians and decrease in detection rate in a complex situation due to segmentation error and occlusion. In this paper, two methods using GM-PHD filter are proposed to improve the poor rates of pedestrian detection algorithms based on 3D LIDAR. First one improves detection performance and resolution of object by automatic accumulation of points in previous frames onto current objects. Second one additionally enhances the detection results by applying the GM-PHD filter which is modified in order to handle the poor situation to classified multi target. A quantitative evaluation with autonomously acquired road environment data shows the proposed methods highly increase the performance of existing pedestrian detection algorithms.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2000.11a
• /
• pp.205-208
• /
• 2000

인간의 좌·우 두 눈에 투영되는 2차원 영상의 양안 시차를 이용하여 물체의 깊이를 인식하는 스테레어 영상이라고 한다. 이러한 2차원 스테레오 영상으로부터 3차원 모델 생성을 위한 깊이 정보를 알기 위해서는 각각의 두 영상에 대응되는 점의 위치를 알 수 있는 변위의 추정이 매우 중요하다. 본 논문에서는 블록 크기에 매우 민감하게 영향 받는 영역기반 방식의 단점을 보완하기 위하여 경계선 정보를 이용한 가변 블록 방식의 변위 추정을 수행한다. 이것은 블록의 크기를 경계선 정보에 따라 가변적으로 정함으로써 정밀한 변위 추성을 할 수 있고 또한 계산량도 많이 줄일 수 있음을 알 수 있다. 이렇게 추정된 변위 정보를 이용하여 특징점에 대한 깊이 정보를 찾아 3차원 모델을 생성한다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.3
• /
• pp.659-666
• /
• 2015

In this paper, we propose a novel reconstruction method of spatially filtered 3D images in integral imaging based on parallel lens array. The parallel lens array is composed of two lens arrays, which are positioned side by side through longitudinal direction. Conventional spatial filtering method by using convolution property between periodic functions has drawback that is the limitation of the position of target object. this caused the result that the target object should be located on the low depth resolution region. The available spatial filtering region of the spatial filtering method is depending on the focal length and the number of elemental lens in the integral imaging pickup system. In this regard, we propose the parallel lens array system to enhance the available spatial filtering region and depth resolution. The experiment result indicate that the proposed method outperforms the conventional method.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.50 no.7
• /
• pp.324-325
• /
• 2001

In this study, the characteristics of ultrasonic sensor fabricated with PZT-Polymer 1-3 type composites are investigated. The 3-D Underwater object recognition using the self-made ultrasonic sensor and SOFM neural network is presented. The ultrasonic sensor is satisfied with the required condition of commercial ultrasonic sensor in underwater. The 3-D underwater object recognition for the training data and the testing data are 100[100%], respectively. The experimental results have shown that the ultrasonic sensor fabricated with PZT-Polymer 1-3 type composites can be applied for sonar system.

• Information and Communications Magazine
• /
• v.7 no.3
• /
• pp.27-34
• /
• 1990

The $(L,\psi)$ feature description on the binary boundary air craft image is introduced of classifying 3-D object (aircraft) identification. Three types for associative matrix memories are employed and tested for their classification performance. The fast association involved in these memories can be implemented using a parallel optical matrix-vector operation. Two associative memories are based on pseudoinverse solutions and the third one is interoduced as a paralell version of a nearest-neighbor classifier. Detailed simulation results for each associative processor are provided.