• Korean Journal of Food Science and Technology
• /
• v.44 no.4
• /
• pp.434-440
• /
• 2012

A placebo-controlled double-blind ingestion study of a beauty supplement containing rice-derived ceramide was performed. Thirty three subjects who always tended to have rough skin due to dryness participated in the study. Dermatological diagnosis by physicians showed that the supplement significantly improved dryness and itching of the skin. On measurement of water content in the skin, the supplement was shown to significantly increase water content in the skin. On microscopic three-dimensional analysis of the epidermis, the supplement was shown to improve smoothness, exfoliation, and short-term ingestion of the supplement containing rice derived ceramide, which is very effective as skin beautifying food.

• The Journal of the Korea Contents Association
• /
• v.21 no.3
• /
• pp.567-575
• /
• 2021

Residents in Dangjin, South Chungcheong Province, in which large-scale emissions facilities such as coal-fired power plants and steel mills are concentrated, are very much concerned about their health despite the local government's aggressive efforts to improve air quality and reduce greenhouse gases. To understand the impact of coal-fired power plants and external factors on local air pollution, the origins of local pollutants were investigated using stable carbon isotopes that are generally used as tracers of the provenance of fine or ultrafine dust. The origins of the pollutants were analyzed with the data library, built using the seasonally measured data for the two separate locations selected considering the distance from the coal-fired power plant and the analysis of previous studies, and with the back trajectory analysis. As a result of analyzing stable isotope ratios, the tendency of high concentration was found in the order of winter > spring > fall > summer. According to the data matching with the library, the mobile pollutants and open-air incineration had a relatively higher impact on the local air pollution. It is believed that this study, as a pilot study, should focus on securing the reliability of the study results through continuous monitoring and data accumulation.

• Journal of IKEEE
• /
• v.25 no.4
• /
• pp.625-633
• /
• 2021

This paper describes a scalable architecture for flexible hardware implementation of Montgomery modular multiplication. Our scalable modular multiplier architecture, which is based on a one-dimensional array of processing elements (PEs), performs word parallel operation and allows us to adjust computational performance and hardware complexity depending on the number of PEs used, N_PE. Based on the proposed architecture, we designed a scalable Montgomery modular multiplier (sMM) core supporting eight field sizes defined in SEC2. Synthesized with 180-nm CMOS cell library, our sMM core was implemented with 38,317 gate equivalents (GEs) and 139,390 GEs for N_PE=1 and N_PE=8, respectively. When operating with a 100 MHz clock, it was evaluated that 256-bit modular multiplications of 0.57 million times/sec for N_PE=1 and 3.5 million times/sec for N_PE=8 can be computed. Our sMM core has the advantage of enabling an optimized implementation by determining the number of PEs to be used in consideration of computational performance and hardware resources required in application fields, and it can be used as an IP (intellectual property) in scalable hardware design of elliptic curve cryptography (ECC).

• Spatial Information Research
• /
• v.11 no.3
• /
• pp.261-274
• /
• 2003

The effective probability-based tile pre-fetching algorithm and the collaborative cache replacement algorithm are able to reduce the response time for user's requests by transferring tiles which will be used in advance and determining tiles which should be removed from the restrictive cache space of a client based on the future access probabilities in Web GISs(Geographical Information Systems). The Web GISs have multi-level abstracted data for the quick response time when zoom-in and zoom-out queries are requested. But, the previous pre-fetching algorithm is applied on only two-dimensional pre-fetching space, and doesn't consider expanded pre-fetching space for multi-level abstracted data in Web GISs. In this thesis, a probability-based pre-fetching algorithm for multi-level abstracted in Web GISs was proposed. This algorithm expanded the previous two-dimensional pre-fetching space into three-dimensional one for pre-fetching tiles of the upper levels or lower levels. Moreover, we evaluated the effect of the proposed pre-fetching algorithm by using a simulation method. Through the experimental results, the response time for user requests was improved 1.8%∼21.6% on the average. Consequently, in Web GISs with multi-level abstracted data, the proposed pre-fetching algorithm and the collaborative cache replacement algorithm can reduce the response time for user requests substantially.

• Cartoon and Animation Studies
• /
• s.51
• /
• pp.293-319
• /
• 2018

Thanks to the advancement of the related technologies and equipment, today's video contents like movies, animations and soap operas are rapidly expanding their expressible cinematic imagination area. In order to fulfill the elevated visual expectations of audiences and realize exciting storytelling and fantastic world, the fusion of different techniques is actively used, and the reality for visual effects and image synthesis is increasing more and more. Accordingly, recent VFX-oriented movies using CG have a much more complicated production process than before. Therefore, the importance of Pre-visualization, aka Pre-vis is becoming bigger in the planning process for sophisticated design. Pre-vis means that the advance visualization for stories or directing ideas in the planning process before starting production of movies or animations. 3D animated Pre-visualization realizing directors' abstract and ambiguous ideas in 3 dimensional environment in advance is, as a powerful means for visual storytelling, briskly used focusing on the VFX film industry on which the present CG is broadly used, and the role of Pre-vis throughout productions has increased compared to the past. The studies, however, on the role and utility of Pre-vis are not enough. Therefore, this study was conducted on the role of Pre-vis used for present VFX movie productions using the examples of 3D animated Pre-visualization production in which the researcher of this study participated. In this study, the role of the Pre-vis that is subdivided presently, is divided into and 3D animatics and their each role is analyzed with the example images. Through this, the characteristics that Pre-vis should have are clarified and the concept of the advantages and utility led by the use of Pre-vis in productions is strengthened. The goal of this study is to induce active uses of Pre-vis throughout productions after forming consensus about the various roles of Pre-vis and their utility.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.46 no.3
• /
• pp.14-26
• /
• 2018

The Biotope Area Ratio (BAR) is a quantitative pre-planning index for sustainable development and an integrated indicator for the balanced development of buildings and outdoor spaces. However, it has been pointed out that there are problems in operations management: errors in area calculation, insufficiency in the underground soil condition and depth, reduction in biotope area after construction, and functional failure as a pre-planning index. To address these problems, this study proposes implementing LIM. Since the weights of the BAR are mainly decided by the underground soil condition and depth with land cover types, the study focused on the terrain and pavements. The model should conform to BIM guidelines and standards provided by government agencies and professional organizations. Thus, the scope and Level Of Detail (LOD) of the model were defined, and the method to build a model with BIM software was developed. An apartment complex on sloping ground was selected as a case study, a 3D terrain modeled, paving libraries created with property information on the BAR, and a LIM model completed for the site. Then the BAR was calculated and construction documents were created with the BAR table and pavement details. As results of the study, it was found that the application of the criteria on the BAR and calculation became accurate, and the efficiency of design tasks was improved by LIM. It also enabled the performance of evidence-based design on the terrain and underground structures. To adopt LIM, it is necessary to create and distribute LIM library manuals or templates, and build library content that comply with KBIMS standards. The government policy must also have practitioners submit BIM models in the certification system. Since it is expected that the criteria on planting types in the BAR will be expanded, further research is needed to build and utilize the information model for planting materials.

• Progress in Medical Physics
• /
• v.23 no.2
• /
• pp.81-90
• /
• 2012

The effect of setup uncertainties on CTV dose and the correlation between setup uncertainties and setup margin were evaluated by Monte Carlo based numerical simulation. Patient specific information of IMRT treatment plan for rectal cancer designed on the VARIAN Eclipse planning system was utilized for the Monte Carlo simulation program including the planned dose distribution and tumor volume information of a rectal cancer patient. The simulation program was developed for the purpose of the study on Linux environment using open source packages, GNU C++ and ROOT data analysis framework. All misalignments of patient setup were assumed to follow the central limit theorem. Thus systematic and random errors were generated according to the gaussian statistics with a given standard deviation as simulation input parameter. After the setup error simulations, the change of dose in CTV volume was analyzed with the simulation result. In order to verify the conventional margin recipe, the correlation between setup error and setup margin was compared with the margin formula developed on three dimensional conformal radiation therapy. The simulation was performed total 2,000 times for each simulation input of systematic and random errors independently. The size of standard deviation for generating patient setup errors was changed from 1 mm to 10 mm with 1 mm step. In case for the systematic error the minimum dose on CTV $D_{min}^{stat{\cdot}}$ was decreased from 100.4 to 72.50% and the mean dose $\bar{D}_{syst{\cdot}}$ was decreased from 100.45% to 97.88%. However the standard deviation of dose distribution in CTV volume was increased from 0.02% to 3.33%. The effect of random error gave the same result of a reduction of mean and minimum dose to CTV volume. It was found that the minimum dose on CTV volume $D_{min}^{rand{\cdot}}$ was reduced from 100.45% to 94.80% and the mean dose to CTV $\bar{D}_{rand{\cdot}}$ was decreased from 100.46% to 97.87%. Like systematic error, the standard deviation of CTV dose ${\Delta}D_{rand}$ was increased from 0.01% to 0.63%. After calculating a size of margin for each systematic and random error the "population ratio" was introduced and applied to verify margin recipe. It was found that the conventional margin formula satisfy margin object on IMRT treatment for rectal cancer. It is considered that the developed Monte-carlo based simulation program might be useful to study for patient setup error and dose coverage in CTV volume due to variations of margin size and setup error.

• Journal of Nutrition and Health
• /
• v.48 no.6
• /
• pp.530-541
• /
• 2015

Purpose: This study was conducted to examine the prevalence of food allergy, food allergy knowledge, and perception on food allergen labelling along with management of substitute meals in school foodservice in elementary school students in Jeju, South Korea. Methods: Six elementary schools in Jeju-si were randomly selected, and the higher grade elementary school students (n=1,500), from fourth graders to sixth graders, were surveyed using a questionnaire in July 2014. A total of 1,000 responses were used for data analysis. Results: The percentage of students who had experienced food allergy was 16.7%; 26.4% had been diagnosed as having a food allergy by doctors. Milk, crabs, and shrimps were the most frequent allergenic foods with common symptoms including urticaria followed by itching, and vomiting. As the student's grade went up, the knowledge scores on food allergy showed a significant increase. Although students with and without food allergy experience had a similar level of knowledge on food allergy and perception on food allergen labelling, students with food allergy experience had a significantly lower level of healthy dietary practices. Last, only 20.4% of students with food allergies were offered substitute meals by school foodservices, and 30.8% of students received food allergy education. Conclusion: For prevention and management of food allergies in school foodservice, schools should provide an individualized substitute meal plan and food allergy education to students, parents, and teachers.