• Journal of Korean Society for Geospatial Information Science
• /
• v.22 no.1
• /
• pp.3-12
• /
• 2014

Cadastre is a set of activity registering diverse land information in national scope land management works. A nation examine land information and register it in a cadastral book, and must update data when necessary to properly maintain the information. Currently, local governments execute work about parcels of land alternation by manual work based on KLIS road map. Therefore, it takes too much time-consuming and makes problem as missing lots of parcels of land alternation. This study suggests the method selecting the parcels of land alteration for Jinan-Gun of Jeollabuk-Do using the GIS spatial overlay and the following results are as belows. Firstly, the manual work on the parcels of land alteration was greatly improved through automatically extracting the number and area of parcels according to the land classification and ownership by GIS spatial overlay based on serial cadastral maps and KLIS road lines. Secondly, existing work based on KLIS road lines could be advanced by analyzing the parcels of land alternation using the actual-width of the road from new address system to consider all road area for study site. Lastly, this study can supply efficient information in determining the parcels of land alternation consistant with road condition of local governments by analyzing the number and area of parcels according to the land classification and ownership within various roadsides ranging from 3m, 5m, and 10m by GIS buffering method.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2000.12a
• /
• pp.65-68
• /
• 2000

본 논문에서는 평면상에 존재하는 물체까지의 거리를 카메라시스템을 이용하여 실제 거리를 계측하는 알고기즘을 제안하였다. 계측 시스템을 교정하기 위해, 우선 3차인 실세계 좌표계와 2차원의 카메라 좌표계의 관계를 해석하고, 카메라의 변수들을 포함하는 카메라 좌표계의 변수들을 구하였다. 한편, 3파원 공간에서 계측면을 평면으로 가정하고 평면의 방정식과 좌표계 변환 방정식으로부터 뉴턴-랩슨법을 이용하여 최소값에 대응하는 근사치를 구함으로써 물체까지의 거리 정보를 추출하였다. 실제의 계측 실험에서, 도로에 표준 물체인 Ca]ibration 시트를 두고 승용차의 백미러 위치에 카메라를 설치하고 영상을 획득하였다. 계측 거리는 4m부터 lOm까지는 1m간격으로 계측하고, 10m부터 30m까지는 10m간격으로 계측하였다. 그 결과 4m에서는 약 1.4mm의 오차가 발생하였고, 30m의 거리에서는 3.5m의 오차를 보였는데 계측 거리가 길어질수록 오차가 지수함수적으로 증가함을 알 수 있었다.

• Journal of Korean Society for Geospatial Information Science
• /
• v.20 no.1
• /
• pp.3-12
• /
• 2012

It is a global trend to give attention to generating precise 3D navigation maps since eco-friendly vehicles have become a critical issue due to environmental protection and depletion of fossil fuels. To date, Mobile Mapping System (MMS) has been a efficient method to acquire the data for generating the 3D navigation maps. To achieve this goal so far in the Mobile Mapping System using the data acquisition method has been proposed to be most effective. For this study the basic RTF filter algorithm was applied to modify to fit MMS quantitative analysis derived floor 99.71%, 99.95% of the highly non-producers to maintain accuracy and high-precision 3D road could create DEM. In addition, the roads that exist within the cars, roadside tree, road cars, such as the median strips have been removed to shields it takes to get results effectively, and effective in practical applications and can be expected to improve operational efficiency is considered.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.25 no.4
• /
• pp.32-48
• /
• 2022

This study presented a spatial data serialization technique that can efficiently store and transmit large amounts of spatial data for precision road maps was designed and implemented. For efficient serialization, a binary spatial data structure is defined, and a coordinate value encoding technique without loss of information is designed using the Zigzag-Z-order curve. The spatial data serialization technique designed for precision road maps was tested, and the data size and encoding/decoding speed after encoding were compared with Protocol buffer and Geobuff. As a result, it was confirmed that the designed serialization method was excellent in data weight reduction performance and encoding speed. However, the decoding speed was inferior to other serialization techniques in linestring and polygon type spatial data. Through this study, it was confirmed that spatial data can be efficiently encoded, stored, and transmitted using binary serialization techniques.

• Journal of Environmental Policy
• /
• v.6 no.1
• /
• pp.111-132
• /
• 2007

The traffic noise of Busan, the second largest city in Korea, is polluting the area. Noise map is a map that shows data on an existing or predicted noise condition in terms of a noise indicator, breaches of a limit value, the number of dwellings exposed to certain values of a noise indicator in a certain area, or on cost-benefit ratios or other economic data on mitigation methods or scenarios with Geographic Information System. With noise map, the effect of traffic noise and the efficiency of city development plan are exactly estimated. So making systematic counteroffer is possible with it. This study is aimed to the construction of basis for noise map construction method for domestic use and the area focus is Busan.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.39 no.1
• /
• pp.55-63
• /
• 2021

The roughness of the road is an important factor directly connected to the ride comfort, and is an evaluation item for functional evaluation and pavement quality management of the road. In this study, data on the road surface were acquired using the latest 3D geospatial information construction technology of ground LiDAR, drone photogrammetry, and drone LiDAR, and the accuracy and roughness of each method were analyzed. As a result of the accuracy evaluation, the average accuracy of terrestrial LiDAR were 0.039m, 0.042m, 0.039m RMSE in X, Y, Z direction, and drone photogrammetry and drone LiDAR represent 0.072~0.076m, 0.060~0.068m RMSE, respectively. In addition, for the roughness analysis, the longitudinal and lateral slopes of the target section were extracted from the 3D geospatial information constructed by each method, and the design values were compared. As a result of roughness analysis, the ground LiDAR showed the same slope as the design value, and the drone photogrammetry and drone LiDAR showed a slight difference from the design value. Research is needed to improve the accuracy of drone photogrammetry and drone LiDAR in measurement fields such as road roughness analysis. If the usability through improved accuracy can be presented in the future, the time required for acquisition can be greatly reduced by utilizing drone photogrammetry and drone LiDAR, so it will be possible to improve related work efficiency.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.3
• /
• pp.434-442
• /
• 2018

In this paper, we propose a road lane color recognition method from the image obtained from a driving vehicle. In autonomous vehicle techniques, lane information becomes more important as the level of autonomous driving such as lane departure warning and dynamic lane keeping assistance is increased. In particular the lane color recognition, especially the white and the yellow lanes, is necessary technique because it is directly related to traffic accidents. In this paper, color information of lane and road area is mapped to a 2-dimensional S-color space based on lane detection. And the center of the feature distribution is obtained by using an improved mean-shift algorithm in the S-color space. The lane color is determined by using the distance between the center coordinates of the color features of the left and right lanes and the road area. In various illumination conditions, about 97% color recognition rate is achieved.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.8 no.2
• /
• pp.55-67
• /
• 2005

This study presented the route location method by applying AHP and evaluating quantitatively. This study developed the program that can be easily applied to this kind of road design, and built the decision support system for route location. The study results are summarized as follows ; We could quantitatively evaluate the appropriateness of exiting routes by applying the AHP based on GIS. If we apply this to the roads that will be newly constructed, we can make the objective and reliable route location when making road plans and basic designs. We improved the technique of route location by applying the decision support system with third-dimensional data, which considers even the vertical alignment plan, to the existing decision support system with second-dimensional data. And, since we can set those data such as vertical slope, earth-volume, structure size, location and construction cost to independent variables, we can make road designs more scientifically and reasonably.

• Journal of Korean Society of Transportation
• /
• v.17 no.1
• /
• pp.105-112
• /
• 1999

Image Processing Technique has been used as an efficient method to collect traffic information on the road such as vehicle counts, speed, queues, congestion and incidents. Most of the current methods which have been used to detect vehicles by the image processing are based on point processing, dealing with the local gray level of each pixel in the small window. However, these methods have some drawbacks. Firstly, detection is restricted by image quality. Secondly, they can not deal with occlusion and perspective projection problems, In this research, a new method which possibly deals with occlusion and perspective problems will be proposed. It extracts spatial information such as the position, the relationship of vehicles in 3-dimensional space, as well as vehicle detection in the image. The main algorithm used in this research is based on an extension of the Hough Transform. The Hough Transform which is proposed to estimates parameters of vertices and directed edges analytically on the Hough Space, is a valuable method for the 3-dimensional analysis of static scenes, motion detection and the estimation of viewing parameters.

• Journal of Astronomy and Space Sciences
• /
• v.19 no.4
• /
• pp.351-366
• /
• 2002

In this study, we developed low cost INS and (D)GPS integration for continuous attitude and position and utilized it for the determination of exterior orientation parameters of image sensors which are equipped in 4S-Van. During initial alignment process, the heading information was extracted from twin GPS and fine alignment with Kalman filter was performed for the determination of roll and pitch. Simulation and van test were performed for the performance analysis. Based on simulation result, roll and pitch error is around 0.01-0.03 degrees and yaw error around 0.1 degrees. Based on van test, position error in linear road is around 10 cm and curve around 1 m. Using direct georeferencing method, the image sensor's orientation and position information can be acquired directly from (D)GPS/INS integration. 4S-Van achieved 3D spatial data using (D)GPS/INS and image data can be applied to the spatial data integration and application such as contemporary digital map update, road facility management and Video GIS DB.