• Proceedings of the KIEE Conference
• /
• 2005.07d
• /
• pp.2783-2786
• /
• 2005

본 논문은 레이저 비젼 센서를 이용하여 측정 대상의 3차인 위치 정보를 측정하기 위한 방법을 제안하였으며, 이를 이용한 측정 시스템을 개발하였다. 레이저센서는 물체의 평면방정식을 찾기 위해 사용되었으며, 측정된 물체의 평면의 방정식과 Camera를 이용한 물체 위치 정보와 함께 측정 대상의 3차원 정보를 얻는다. 이러한 고정밀 고속 계측을 위한 레이저 모듈 및 소프트웨어를 개발하고 전용 JIG장치에 의하여 측정하던 방식을 Robot과 Laser Vision Sensor를 이용하여 자동으로 측정하는 시스템을 구현하였다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.05a
• /
• pp.165-168
• /
• 2002

In most shipyards, the measurement of 3-dimensional relative position of pipes should be connected in the block depends on the manual operation. It results a very tedious and inefficient procedure, thus the proper measurement system is needed to improve productivity and accuracy. This paper describes the development results of pipe measurement system including system concepts, measuring procedures, system calibration, and its accuracy and productivity. And also, the possibility and things to be improved for application in shipyard are discussed in this paper.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.18-18
• /
• 2022

하천 합류부에 있어 수체의 혼합양상을 분석은 고해상도의 자료가 필요하다. 반면에 수질환경 문제와 기존 모니터링 시스템이 고정된 측정 방식으로 이루어지기 때문에 하천 전체의 정보는 저해상도의 결과값은 나타낸다. 또한, 많은 수중 환경 문제가 1차원에서 3차원에 걸쳐 있지만, 대부분의 관측 시스템은 1차원에 머물러 있음을 확인할 수 있다. 이러한 문제를 해결하기 위해서는 보다 발전된 관찰 및 계측이 필요하다. 그에 따른 고해상도의 측정 자료를 얻기 위해서는 측정자가부담을 많이 가지며, 측정할 수 있는 영역이나 시간적으로 제한적이다. 해상도는 낮추되 광범위한 데이터를 취득하기 위해서는 적절한 보간법이 선정되어야 한다. 관련 논문을 검토한 결과, 측정 결과에 따른 2차원 횡단면 분포의 내용이 지배적이었고, 3차원 매핑 및 3차원 분석을 통한 수리학적 정보 획득에 관한 연구는 부족한 실정이였다. 특히 3차원 하천 수질 농도의 연구가 불충분했다. 그에 따라 저해상도 측정결과에서의 예측과 보간법에 대한 시각화를 통해 하천의 전체적인 수리·수질정보를 표기하였다. 각각의 보간법을 비교함으로써 하천 매핑에 있어 IDW, Natual Neighbor, Kriging 기법을 적용하여 시각화된 자료와 정량적 평가를 통해 하천매핑의 정밀성을 향상시켰다. 이를 통해 3차원화된 공간보간 자료를 이용한 하천합류부의 혼합양상을 해석하였다. 3차원 데이터를 활용하는 방법으로 측정 및 모니터링 기술의 중요한 데이터로 활용되며, 이러한 데이터는 유해물질 저감 기술 및 평가 예측 기술의 기초 데이터로 활용되고 있다. 유해화학물질 추정, 호수의 고위험 조류군 계층분석 등 다양한 수생건강 진단기술을 활용할 수 있다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.1
• /
• pp.107-119
• /
• 1991

This dissertation analyzes the running mechanism of flexible and thin tape above rotating head through the experiment. The scope of study is confined to measure the vertical deformation of running tape under hydrodynamic pressure invoking phenomena of elasto-hydrodynamic lubrication between the protruded bump on a rotating cylinder ad the running tape. Experimental system is devised to measure the vertical deflection of the running tape by opto-electronical displacement gauge, which enables to detect microscopic surface deflection of high frequency. Thorough the tests of small specimens of groove and bump, the accuracy and reliability of this experimental method is confirmed and achieved an accuracy within 5%(2.mu.m) error for the microscopic deflection with high frequency. In experimental works, the effects of bump size on flying characteristics of the tape were evaluated and examined. For the vertical deformation of the running tape. the numerical results and its trend agree qualitatively with the experimental ones.

• Explosives and Blasting
• /
• v.38 no.2
• /
• pp.1-12
• /
• 2020

Digital Image Correlation is a well-established method for displacements, strains and shape measurements of engineering objects. Stereo-camera 3D Digital Image Correlation (3D-DIC) systems have been developed to match the specific requirements for measurements posed by material and mechanical industries. Although DIC method provides the capabilities of scaling a field-of-view(FOV), dimensions of Geotechnical structure objects in many cases are too big to be measured with DIC based on a single camera pair. It can be the most important issue with applying 3D DIC to the measurement of Geotechnical structures. In this paper, We were present stereo vision conditions in a 3D DIC system that can be measured for large FOV(30×20m) and high precisions(z-displacement 0.5mm) of the ground objects with Stereo-camera DIC systems.

• Journal of Advanced Navigation Technology
• /
• v.18 no.3
• /
• pp.201-208
• /
• 2014

Due to diversification of ships and limited space of pier, when ships come alongside the shallow water or narrow pier, sea area with small mooring facilities and floating matter is frequently applied. Through these, coming alongside the various space is capable and cost effectiveness is enhanced. However, when ships, applying small mooring facilities and floating matter, come alongside, there can be some impulse by waves between the floating things and ships which possibly leads to mass disaster. Therefore, there should be forecasts and analysis of the movement caused by waves. On this study, we develop measuring system for movement analysis of mooring and floating matters which provides base data with movement traits by measuring 3-D exercise information and acceleration at mokpo maritime university marina facility. Also, the composition and principles of the developed system is explained.

• Journal of the Korean Geotechnical Society
• /
• v.19 no.4
• /
• pp.23-32
• /
• 2003

The displacement measuring systems of slope ground surface are very expensive instruments and have disadvantages concerning installing, maintaining and surveying. The measuring works are very dangerous. Recently, simple systems are required to measure the displacement of slope ground surface in stages of cutting and maintaining slope. In this study, the mechanism of Softcopy Photogrammetry is applied to measure the displacement of slope ground surface. Three dimensional data of the slope ground surface can effectively be obtained in order to analyze slope stability. Computer Program, DIMA (Design IMmage Analysis), including the reformation process of a contour line was developed. As a result of this study, countermeasure and instruction standards of the displacement of slope ground surface before and after slope failure are established. Also, disadvantages of the existing system can be complemented.

• Journal of Korea Multimedia Society
• /
• v.15 no.7
• /
• pp.941-950
• /
• 2012

A virtual garment fitting system which fits the top and bottom of a garment on 3D body data is introduced. This system uses the laser scanned 3D body data and the digital images photographed the front and back of a garment. The digital images are modeled to reflect tensions among particles in the images and the friction and gravity effects are considered in the fitting process to the body data. When a bottom is fitted, a virtual belt to hold the bottom in the waist is introduced since gravity effects pull down it. Also the process for fitting the top and bottom on layers is proposed here. The system has the strengths that it uses only the front and back image of a garment instead of using complicated patterns of a garment, and provides a realistic fit result as a 3D figure. As on-line retailing shop in present displays front and back images of garments, this system also does. However this system provides a differentiated service to user than present retailing shop as showing a 3D fit image. It will make a new trend in online shop retailing of garment.

• Progress in Medical Physics
• /
• v.19 no.4
• /
• pp.285-290
• /
• 2008

In this study, we have fabricated a one-dimensional fiber-optic dosimeter for electron beam therapy dosimetry. Each fiber-optic dosimeter has an organic scintillator with a plastic optical fiber and it is embedded and arrayed in the plastic phantom to measure one-dimensional high energy electron beam profile of clinical linear accelerator. The scintillating lights generated from each sensor probe are guided by plastic optical fibers to the multi-channel photodiode amplifier system. We have measured one-dimensional electron beam profiles in a PMMA phantom according to different field sizes and energies of electron beam. Also, the isodose and three-dimensional percent depth dose curves in a PMMA phantom are obtained using a one-dimensional fiber-optic dosimeter with different electron beam energies.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2011.04a
• /
• pp.515-518
• /
• 2011

본 연구는 3차원 인체 데이터 위에 가상 의류를 착장시키는 착장 시뮬레이션 시스템의 구현을 소개 한다. 인체 데이터는 3차원 전신 레이저 스캐너로 계측하였으며 가상의류는 의복의 앞뒷면 촬영 영상으로 하였다. 대상 의류는 원피스, 티셔츠, 바지 등과 같은 비교적 복잡하지 않은 구조의 의류이며, 본 논문에서는 상의 및 원피스의 착장 과정과 바지의 착장 그리고 바지위에 상의를 착장하는 중첩 착장의 과정을 보여준다. 가상 착장 결과로 실제 착장과 동일한 결과를 제공하기 때문에 치수가 자신에게 맞는지의 정보와 착장시의 어울림의 정보가 온라인상에서 육안으로 확인되도록 제공되며, 디지털 의류의 준비도 간단하여, 본 논문의 결과로 새로운 형태의 온라인 의류 판매 방식이 제시될 수 있다.