• Journal of Animal Environmental Science
• /
• v.12 no.3
• /
• pp.141-150
• /
• 2006

To optimise the efficient use of nutrients in pig slurry is to cultivate friendly environmental crops. This field survey is to investigate the actual conditions of pig slurry utilization for cultivation of crops in the agricultural farm, based on the survey for 407 selected farms in 9 provinces included 78 counties in Korea. The results obtained in this survey were summarized as follow ; The motive which came to use pig slurry in the agricultural farm were production of friendly environmental crops (29.7%), economy of chemical fertilizer (25.1%), spontaneously (19.2%), inducement of neighboring farmhouse (16.0%), increase of soil fertility (9.3%), and the others (0.7%), respectively. The proportions of pig slurry application land were 56.5% for.ice paddy, 22.6% for dry field, 13.3% for orchard, 4.4% for controlled agriculture and 3.2% for other, respectively. The number of times of pig slurry utilization per year were once (48.9%), twice (31.9%), thrice (14.0%), and the others (5.2%), respectively. The controversial points of pig slurry utilization were malodor (54.1%), insufficiency of spread equipment (22.1%), inconvenience (14.5%), over application (3.4%), over cost (2.9%), heavy metal (1.7%), sanitation (1.0%) and the other (0.2%), respectively. The results indicated that pig slurry could be used as fertilizer source of friendly environmental crops, but further studies are needed to determine the application method and value of the pig slurry for crop cultivation.

• Journal of Technology Innovation
• /
• v.11 no.1
• /
• pp.147-176
• /
• 2003

This Paper Presents a new measurement technique to derive the level of BSRC (Basic Science and Research Capacity) index by use of the factor analysis which is extended with the assumption of the standard normal probability distribution of the selected explanatory variables. The new measurement method is used to forecast the gap of Korea's BSRC level compared with those of major OECD countries in terms of time lag and to make their international comparison during the time period of 1981∼1999, based on the assumption that the BSRC progress function of each country takes the form of the logistic curve. The US BSRC index is estimated to be 0.9878 in 1981, 0.9996 in 1990 and 0.99991 in 1999, taking the 1st place. The US BSRC level has been consistently the top among the 16 selected variables, followed by Japan, Germany, France and the United Kingdom, in order. Korea's BSRC is estimated to be 0.2293 in 1981, taking the lowest place among the 16 OECD countries. However, Korea's BSRC indices are estimated to have been increased to 0.3216 (in 1990) and 0.44652 (in 1999) respectively, taking 10th place. Meanwhile, Korea's BSRC level in 1999 (0.44652) is estimated to reach those of the US and Japan in 2233 and 2101, respectively. This means that Korea falls 234 years behind USA and 102 years behind Japan, respectively. Korea is also estimated to lag 34 years behind Germany, 16 years behind France and the UK, 15 years behind Sweden, 11 years behind Canada, 7 years behind Finland, and 5 years behind the Netherlands. For the period of 1981∼1999, the BSRC development speed of the US is estimated to be 0.29700. Its rank is the top among the selected OECD countries, followed by Japan (0.12800), Korea (0.04443), and Germany (0.04029). the US BSRC development speed (0.2970) is estimated to be 2.3 times higher than that of Japan (0.1280), and 6.7 times higher than that of Korea. German BSRC development speed (0.04029) is estimated to be fastest in Europe, but it is 7.4 times slower than that of the US. The estimated BSRC development speeds of Belgium, Finland, Italy, Denmark and the UK stand between 0.01 and 0.02, which are very slow. Particularly, the BSRC development speed of Spain is estimated to be minus 0.0065, staying at the almost same level of BSRC over time (1981 ∼ 1999). Since Korea shows BSRC development speed much slower than those of the US and Japan but relative]y faster than those of other countries, the gaps in BSRC level between Korea and the other countries may get considerably narrower or even Korea will surpass possibly several countries in BSRC level, as time goes by. Korea's BSRC level had taken 10th place till 1993. However, it is estimated to be 6th place in 2010 by catching up the UK, Sweden, Finland and Holland, and 4th place in 2020 by catching up France and Canada. The empirical results are consistent with OECD (2001a)'s computation that Korea had the highest R&D expenditures growth during 1991∼1999 among all OECD countries ; and the value-added of ICT industries in total business sectors value added is 12% in Korea, but only 8% in Japan. And OECD (2001b) observed that Korea, together with the US, Sweden, and Finland, are already the four most knowledge-based countries. Hence, the rank of the knowledge-based country was measured by investment in knowledge which is defined as public and private spending on higher education, expenditures on R&D and investment in software.

• Clinical and Experimental Pediatrics
• /
• v.51 no.4
• /
• pp.367-371
• /
• 2008

Purpose : The surfactant dysfunction may play an important role in meconium aspiration syndrome (MAS). We aim to evaluate the effect of surfactant lavage in the treatment of term infants with MAS. Methods : The medical records of 15 neonates with severe MAS admitted at Yongdong Severance Hospital from 2005 to 2007 were reviewed and analyzed. Seven infants with severe MAS necessitating mechanical ventilation underwent tracheobronchial lavage with 20 mL/kg of diluted (5.3 mg phospholipid/mL) surfactant saline suspension ($Newfactan^{(R)}$). Data regarding clinical outcomes was assessed by comparison with 8 control infants with equally severe MAS retrospectively. Results : In the lavage group, radiological improvement was evident after 6 hours of treatment. The duration of artificial ventilation and duration of hospital day were also significantly shorten in the lavage group compared with the control group. The mean oxygen index, mean ventilation index improved significantly within the first 6 hours after treatment. No differences were found in the incidence of major complications and mortality between the two groups. Conclusion : The surfactant lavage seems to be an effective and safe method for treatment of severe MAS. A multicenter, large scaled randomized controlled trial is needed for further study.

• Radiation Oncology Journal
• /
• v.20 no.2
• /
• pp.165-171
• /
• 2002

Purpose : In order to perform craniospinal irradiation (CSI) in the supine position on patients who are unable to lie in the prone position, a new simulation technique using a CT simulator was developed and its availability was evaluated. Materials and Method : A CT simulator and a 3-D conformal treatment planning system were used to develop CSI in the supine position. The head and neck were immobilized with a thermoplastic mask in the supine position and the entire body was immobilized with a Vac-Loc. A volumetrie image was then obtained using the CT simulator. In order to improve the reproducibility of the patients' setup, datum lines and points were marked on the head and the body. Virtual fluoroscopy was peformed with the removal of visual obstacles such as the treatment table or the immobilization devices. After the virtual simulation, the treatment isocenters of each field were marked on the body and the immobilization devices at the conventional simulation room. Each treatment field was confirmed by comparing the fluoroscopy images with the digitally reconstructed radiography (DRR)/digitally composite radiography (DCR) images from the virtual simulation. The port verification films from the first treatment were also compared with the DRR/DCR images for a geometrical verification. Results : CSI in the supine position was successfully peformed in 9 patients. It required less than 20 minutes to construct the immobilization device and to obtain the whole body volumetric images. This made it possible to not only reduce the patients' inconvenience, but also to eliminate the position change variables during the long conventional simulation process. In addition, by obtaining the CT volumetric image, critical organs, such as the eyeballs and spinal cord, were better defined, and the accuracy of the port designs and shielding was improved. The differences between the DRRs and the portal films were less than 3 mm in the vertebral contour. Conclusion : CSI in the supine position is feasible in patients who cannot lie on prone position, such as pediatric patienta under the age of 4 years, patients with a poor general condition, or patients with a tracheostomy.

• Journal of Sericultural and Entomological Science
• /
• v.15 no.1
• /
• pp.37-48
• /
• 1973

The purpose of this studies is to improve the cohesion of raw silk through various analyses on cocoon drying, cooking, reeling, re-reeling, and on the properties of water. Also we investigated the correlation between silk testing items which we have reached to the following results. 1. Drying of cocoon When cocoons were slowly dried with 100$^{\circ}C$, the results of cohesion became much better. On the other hand, the results were considerably decreased in case the temperature with 115$^{\circ}C$. 2. Cooking of cocoon In case of the cooking of cocoon, we found that the result of cohesion was best with incomplete cooking, that of the control was next, while in over cooking, the results were very low. Also the results of cohesion were much better when using the method of over cooking with sericin arrestive agent than that of incomplete cooking with sericin agglutinating agent. 3. Reeling of cocoon A) When the temperature of reeling bath was 25-45$^{\circ}C$, the results of cohesion test were much better, but at the temperature below 25$^{\circ}C$ or above 45$^{\circ}C$, the results became worse. B) With out the process of croissieur, the results of cohesion were too bad, but in case of croissieur more than 1cm, cohesion became better rapidly. Further more, we understood that the results of cohesion were improving slightly with longer length of croissieur. C) When the velocity of reeling was increased, the results of cohesion also improved. The best results were shown when reeling velocity was 180-220 r.p.m. But when the velocity was increased more than 220 r.p.m., the results of cohesion got worse more or less. D) When the temperature of the drying pipe in reeling machine was raised, the results of cohesion also showed a tendency to improve. 4. Re-reeling A) We could net reach a conclusion as to have correlation between the number of dipping repeat in vacuum tank and the results of cohesion before re-reeling process. B) When we used Seracol 500 as an agglutination protective agent with l/1000 to l/2000 of water, the results of cohesion test were better. C) When we used Pearl-lite as an agglutination protective agent with 1/1000 to 1/2000 of water, the results of cohesion were considerably better. D) We gained tile best results when used Cohesion Improving Chemical, A-80, with 500-1500 times diluted. 1) Results of cohesion was improved when humidity was low or temperature was high in the rereeling machine. 5. Filature water A) The water pH near the isoelectric point of protein showed the best cohesion, but the farther water pH, the worser results were obtained. B) With the increasing of M-alkalinity in filature water, the results of cohesion were worse. Above all, we understood the tendency of the results of cohesion get worse when the M-alkalinity is increased above 200 ppm. C) By increasing the total hardness of the filature water, it improved the results of cohesion. Especially, when the total hardness was above 300ppm, the results were extremely high. 6. Effects combination of each results A) The result of effects combination in filature processes with the obtained best conditions was distinctively improved. But the results could not reach in mathematicaly double effect. When reelied under worse conditions, the results of cohesion test were too bad. There was "effect limit" for the promotion. B) Generally the results of cohesion were bad when the filature conditions(the temperature, pressure and the properties of water, etc) are processed as sericin loss to be high. On the other hand, the results were very good when lower sericin loss was controlled in filature conditions. C) When filature conditions such as reeling velocity and croissieur length provide pysical cohesion ability and when raw silk dry fast during reeling and re-reeling, we found the result of cohesion was better. 7. Correlation of silk testing items. A) A negative correlation exists between the results of cohesion test and cleanness defect. Another word, the result of cohesion test was found to be worse as cleanness defect increased. B) In cleanness, cohesion has negative correlation against the number of slugs, but we could not find any correlation against long loops, loose ends. C) Cohesion has negative correlation against average neatness and low neatness defect. The better the results of neatness respectively, the better the results of cohesion found. D) There is no correlation between tenacity and the results of cohesion test, but there was high positive correlation between the results of elongation and those of cohesion test. The more elongation, the better the results of cohesion was found.

• Childhood Kidney Diseases
• /
• v.18 no.1
• /
• pp.36-41
• /
• 2014

Purpose: Urinary tract infections (UTIs) are the most common source of bacterial infections in infants and young children. Accurate diagnosis and treatment is important because of their association with renal scarring, which can lead to complications. Urine endothelin-1 (ET-1) is the major renal isoform produced and released by renal mesangial cells in response to glomerular injury. This study aimed to investigate whether urinary levels of ET-1 can be used as a biomarker for UTI diagnosis. Method: We conducted a prospective study using medical records of 70 patients below the age of 18 years, who visited Chung-Ang University Hospital from July 2012 to July 2013. We classified the patients into the UTI and control groups based on urine culture studies. The UTI group was further divided into upper and lower UTI groups using 99m-Technetium dimercaptosuccinic acid scintigraphy. Urine ET-1 was measured using enzyme linked immunosorbent assay with 0.3 mL urine. Results: The UTI and control groups were comprised of 45 and 25 patients, respectively. Mean urine ET-1 levels were significantly higher in the UTI group than in the control group ($1.41{\pm}0.35$ pg/mL vs. $0.33{\pm}0.07$ pg/mL, P =0.04). There was no significance difference in the quantitative value between the upper and lower UTI groups (P =0.552). There was no correlation between urine ET-1 and serum C-reactive protein (Pearson correlation [R]=0.24), urine ET-1 and serum white blood cell count (R=0.19). Conclusion: Our study suggests that urine ET-1 can be used for early diagnosis of UTI in children.

• Journal of the Korean Geotechnical Society
• /
• v.32 no.10
• /
• pp.41-53
• /
• 2016

Stability of the braced earth wall in the composite ground, which is composed of the jointed base rocks and the soil strata depends on the earth pressure acting on it. In most cases, the earth pressure is calculated by the empirical method, in which base rocks are considered as a soil strata with the shear strength parameters of base rocks. In this case the effect of the joint dips of the jointed base rocks is ignored. Therefore, the calculated earth pressure is smaller than the actual earth pressure. In this study, the magnitude and the distribution of the earth pressure acting on the braced wall in the composite ground depending on the joint dips of the base rocks and the ratio of soil strata and base rocks were experimentally studied. Two dimensional large-scale model tests were conducted in a large scale test facility (height 3.0 m, length 3.0 m and width 0.5 m) by installing 10 supports in a scale of 1/14.5. The test ground was presumed with the base rock ratio of the composite ground of 65%:35% and 50%:50% and with the joint dips for each base rock layer, $0^{\circ}$, $30^{\circ}$, $45^{\circ}$ and $60^{\circ}$, respectively. And then finite element analyses were performed in the same condition. As results, the earth pressure on the braced wall increased as the base rock layer's joint dips became larger. And earth pressure at the rock layer increased as the rock rate became larger. The largest earth pressure was measured when the base rock rate was 50% (R50) and the rock layer's joint dips was $60^{\circ}$. Based on these results, a formular for the calculation of the earth pressure in the composite ground could be suggested. Distribution of earth pressure was idealized in a quadrangular form, in which the magnitude and the position of peak earth pressure depended on the rock ratio and the joint dips.

• Tuberculosis and Respiratory Diseases
• /
• v.48 no.4
• /
• pp.438-447
• /
• 2000

Background : Transbronchial lung biopsy (TBLB) is a relatively simple and convenient procedure to obtain lung tissue from a patient with diffuse or localized lesion on chest radiographs, whose disease cannot be diagnosed through routine tests. The authors tried to evaluate the diagnostic value of TBLB, especially, the concordance between CT scan and TBLB with respect to the location of the lesion and diagnostic yield according to tumor-bronchus relationship. Method : We reviewed the medical records, plain chest films, and chest CT scans of 278 patients who underwent TBLB at Kyungpook National University Hospital between January 1996 and June 1998. Results : One hundred and sixteen (41.7 %) patients were diagnosed by TBLB. Diagnostic yield of TBLB of malignant tumors tended to be higher than that of benign diseases (64.7% versus 53.9%, p=0.09). Of primary lung cancers, TBLB was more diagnostic in adenocarcinoma and small-cell carcinoma than other cell types (p<0.01) and, of benign diseases, more diagnostic in tuberculosis than in non-tuberculous diseases (p<0.05). There was no significant difference in the diagnostic rate according to the location of the tumor. The diagnostic rate tended to increase with the size of tumor (p=0.06). The diagnootic rate of TBLB did not differ according to the pattern of lesion in benign diseases. However, in malignant diseases TBLB was more diagnostic in diffuse/multiple nodular lesions than in localized lesions(p<0.05). According to the tumor-bronchus relationship, TBLB was more diagnootic in type I/II groups than in other types. CT scan and TBLB showed a strong correlation with respect to the localization of the lesion (r=0.994, p<0.01). Conclusion : The above results show that TBLB is useful in the diagnosis of lung disease. CT scan and TBLB showed a strong correlation in determining the location of the lesion. Diagnostic yield of TBLB is higher in lesions with 'bronchus sign' (type I and II). TBLB and other diagnootic methods such as transthoracic needle aspiration are expected to complement one another in the diagnosis of lung diseases.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.32 no.6
• /
• pp.882-889
• /
• 2008

Three fabrics, 100% silk, nylon and cotton each, were dyed with a lichen dye solution prepared by a fermentation method under conditions of varying dyebath pH and temperature. To verify the effect of chitosan on fabric dyeing, the 100% cotton fabric was treated with a chitosan solution before dyeing. The K/S, CIE $L^*$, $a^*$, $b^*$, ${\Delta}E$ and Munsell values of the dyed samples were measured. Colorfastness of each sample was also investigated. The maximum K/S value was measured at 520nm wavelength for the dyed silk fabric and at 480nm for the dyed cotton and nylon. The K/S values for the dyed silk fabric were much greater than those of the other fabrics. The dyed silk fabric showed a red tone on the Munsell color system, and the dyed nylon and cotton fabrics a yellowish red tone. Dye affinity to fabrics was better in a neutral or acidic dyebath. As dyeing temperature increased, K/S values increased for the dyed nylon and cotton fabrics but not for the silk. Dyeability of cotton fabrics could improve by Chitosan treatment. As for most natural dyes, colorfastness of all dyed samples was poor. The silk fabric showed an excellent dry cleaning fastness of Grade 5.

• Archives of design research
• /
• v.12 no.4
• /
• pp.33-44
• /
• 1999

Fashion is subjected to newness and change by itself. Fashion trend and tendency which could predict next season akeady indicated that digital and cybel11ation environment lliould be factors in fashion. Changes in future life styles and values caused by digital environment must be variables as fashion objects by themselves. Therefore digital environment of a fashion itself and that all encountered in fashion will not only be an existing situation but also an objective and a factor which must be pursued with fashionable sense in future fashion. Advanced technology and social change in relation to digital environment requires that educational method as well as its content will be changed on the scene of education for future. Thus we should seek an educational direction in fashion design for future society in which digital environment requires new paradigm. Subject to these backgrounds this study has an intension to study the change in fashion extensively influenced by expanded digital environment on a limited situational level of fashion design education and to suggest an educational direction for professional in future fashion design who will serve as a core of fashion area in the future. It is essential that education of professional in fashion for future should be achieved by digital-minded level that eagerly understands and accepts future society in which digital environment will be a main axis. It is necessary for this to make them expetience computers, digital media including CAD program. We have to note that education of digital media is more effective and applicable when accomplished in CAI level which can be related and expetienced with fashion education rather than mere functional training in media themselves. Intellectual creativity will be a vety source of producing values and national competence in 21st centtury. Education of design professional in fashion area must positively accept these environmental charactetistics in future society, as well as deeply reflect the education for the future.