• 한국지구물리탐사학회:학술대회논문집
• /
• 2007.12a
• /
• pp.53-62
• /
• 2007

Preliminary gas hydrate surveys were carried out From 2000 to 2004 in the East Sea. Research results showed the geophysical evidence of gas hydrate existence. In 2005, Gas Hydrate R&D Organization was established and 10 year gas hydrate development program was initiated. In the $1^{st}$ stage of the program from 2005 to 2007, 6,600 L-km 2-D seismic survey was conducted in the $1^{st}$ year 2005, and $400\;km^2$ 3D survey was conducted in the $2^{nd}$ year 2006. Acquired seismic data were processed and seismic section and 3D cube were produced. By geophysical interpretation and velocity analysis, prospective areas were mapped and candidate drilling sites were recommended. For the precise interpretation, velocity was analyzed using AVO method, and BSR signal was analyzed using deconvolution method. For the prospective area, OBS and high-resolution seismic surveys were conducted. This presentation shows the introduction and examples of the research results of the geophysical methods applied for the gas hydrate exploration in the East Sea.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.40 no.1
• /
• pp.1-14
• /
• 2022

In order to conduct rapid, accurate and safe surveying at the excavation site, In this study, the possibility of underground facility survey using drones and the expected effect of 3D visualization were obtained as follows. Phantom4Pro 20MP drones have a 30m flight altitude and a redundant 85% flight plan, securing a GSD (Ground Sampling Distance) value of 0.85mm and 4points of GCP (Groud Control Point)and 2points of check point were calculated, and 7.3mm of ground control point and 11mm of check point were obtained. The importance of GCP was confirmed when measured with low-cost drones. If there is no ground reference point, the error range of X value is derived from -81.2 cm to +90.0 cm, and the error range of Y value is +6.8 cm to 155.9 cm. This study classifies point cloud data using the Pix4D program. I'm sorting underground facility data and road pavement data, and visualized 3D data of road and underground facilities of actual model through overlapping process. Overlaid point cloud data can be used to check the location and depth of the place you want through the Open Source program CloudCompare. This study will become a new paradigm of underground facility surveying.

• Korean Journal of Poultry Science
• /
• v.50 no.2
• /
• pp.73-80
• /
• 2023

Vitamin D3 is an essential nutrient which plays an important role in calcium metabolism for eggshell formation, in calcium and phosphorus metabolism for bone mineralization, and in maintaining host immunity. Although there have been a great deal of studies investigating the role of vitamin D3 in eggshell quality and vitamin D3 contents in eggs, no attempts have been made to monitor the eggshell quality and vitamin D3 contents in eggs at farm level. Thus, this survey was conducted to measure eggshell quality and vitamin D3 contents in eggs laid from laying hens fed diets containing different levels of vitamin D3. Eggs from four commercial laying hen farms were sampled before and 1, 2, 3 and 5 weeks after provision of the vitamin D3-enriched diets added with the level of 16,500 IU and 29,000 IU. Dietary vitamin D3 did not affect the eggshell color and breaking strength, but increase the eggshell thickness. In addition, vitamin D3 contents in eggs were elevated as vitamin D3 in diets was increased. It is concluded that addition of dietary vitamin D3 into the diets of laying hens at the commercial laying hen farms could improve eggshell quality and vitamin D3 contents in eggs. It is expected that the prediction equation for egg vitamin D3 contents might be produced if more data on vitamin D3 contents in diets and eggs at the farms are to be analyzed.

• Weed & Turfgrass Science
• /
• v.2 no.3
• /
• pp.260-266
• /
• 2013

This study was conducted to investigate changes of vegetation and soil characteristics to tidal land of Saemangeum reclaimed land from 2010 to 2012. Soil salinity was 0.16-22.3 dS $m^{-1}$ in the first survey, while the three years later, it was decreased to 0.12-4.22 dS $m^{-1}$. Vegetations were classified as 6 families and 26 species but it was increased to 8 families and 31 species after three years. Numbers of average species in survey site were increased from 7.1 species to 10.6 species. Numbers of vegetation were increased at each survey sites except for survey site 7 : there was decreased halophyte according to decrease in the soil salinity. Biomass production was increased at low production site, and showed highest production in area of dominant vegetation as Phragmites communis. Simpson's dominance ratio(SDR) of main vegetation as Phragmites communis, Calamagrostis epigeios were increased but Suaeda maritima, Salicornia europaea, Puccinellia nipponica and Zoysia sinica were decreased.

• Nutrition Research and Practice
• /
• v.7 no.5
• /
• pp.409-417
• /
• 2013

This study was performed to determine the effects of dietary calcium (Ca) intake, milk and dairy product intake, and serum vitamin D level on bone mineral density. The survey data from the 2008-2009 Korea National Health and Nutrition Examination Survey (KNHANES) for adults (3,819 males, 5,625 females) aged > 20 years were examined; osteoporosis was defined according to the standards for Asian populations (T-score < -2.5). The risk for osteoporosis significantly decreased as Ca intake increased; this effect persisted (quartile 4 vs. quartile 1 of Ca intake: odds ratio [OR] 0.66; 95% confidence interval [CI]: 0.50-0.87) even after adjustment for gender, age, and other factors (body mass index, serum vitamin D, menstruation, female hormone intake, menopausal status, and the number of days per week of muscular strength exercise). Additionally, the risk for osteoporosis significantly decreased as the Ca/P ratio increased (quartile 4 vs. quartile 1: OR 0.76; 95% CI: 0.58-0.98). The degree of risk was 0.96 (0.66-1.38) in those who consumed < 1 portion of milk or dairy products daily, and 0.71 (0.53-0.96) in those who consumed > 1 portion per day, compared with those who had zero intake. The risk for osteoporosis significantly decreased as the serum 25(OH) vitamin D level increased. From these results, we advocate an increase in Ca, milk, and dairy product intake, and that serum 25(OH) vitamin D levels be maintained within the normal range, for the maintenance of bone health and the prevention of osteoporosis in adults.

• Journal of the Korean earth science society
• /
• v.35 no.6
• /
• pp.422-428
• /
• 2014

Korea Institute of Geoscience and Mineral Resources (KIGAM) and Mineral Resources Authority of Mongolia (MRAM) performed a joint survey on Ugii Nuur Fe-Mn mineralized area. Following the survey, we carried out magnetic survey and 3D magnetic susceptibility inversion. Based on the inversion results, basic feasibility study and 3D imaging of Fe-Mn mineralized area were performed using 3D geological modeling technique. Using the distribution of total magnetic field data, we were confirmed for the possibility of horizontal extension of ore bodies from surface outcrops. The 3D magnetic susceptibility model, which is highly related with Fe content, analyzed by inversion shows that the ore bodies of Deposit 1 and Deposit 2 are extended to the underground and ore bodies that are not exposed on the surface are largely distributed in the underground. If we perform the integration analysis using this magnetic susceptibility model and the ore grade data analyzed by drilling survey, it is possible to carry out the effective potential evaluation of Ugii Nuur Fe-Mn ore deposit.

• Journal of Nutrition and Health
• /
• v.41 no.6
• /
• pp.502-509
• /
• 2008

Anemia is common in Diabetes Mellitus(DM) with chronic kidney disease. Recent research suggests that DM itself also may be a risk factor of anemia even though kidney failure causes anemia. However, it has not been reported that the impact of DM on anemia in representative data of Korean population. A total of 5,417 Korean adults aged 20 years and older(2,328 men, 3,089 women) were selected from the participants of the 2005 Korean National Health and Nutrition Examination Survey(KNHANES) for this study. Anemia was defined as hemoglobin(Hb) < 13 g/dL and hematocrit(Hct) < 39% for men or Hb < 12 g/dL and Hct < 36% for women. DM was defined as a fasting blood glucose $\geq$ 126 mg/dL. Korean adults with anemia had a higher prevalence of DM than in normal adults(11.4 vs 7.5%; p<0.0001). The unadjusted odds ratio(OR) for anemia was greater in Korean men with DM than in normal men(OR=4.25; 95% CI: 2.48-7.29). This results did not differ after adjustment for the putative risk factors for anemia including chronic disease(OR=2.64; 95% CI: 1.45-4.83). However, the presence of DM was not related with anemia in Korean women. In conclusion, this study revealed that DM might be an independent risk factor for anemia in Korean men. Identification and management for anemia are needed in Korean population with DM as well.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.49 no.3
• /
• pp.261-270
• /
• 2004

The study was designed to forecast and derive future core technologies using Delphi method in Korea agriculture. Based on the technologies, agriculture in Korea will be expected to improve as a core and strategic industry producing high value added in 21 century. Questions were given to specialists by each technology in order to survey importance, realization time, level of R&D in Korea and the leading country, leading group of R＆D, effective policy, etc. for each technology. The survey for Delphi was confined to the specialists in the area of crop production. The 44 core technologies were derived and 39 specialists answered the survey.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.10a
• /
• pp.1318-1327
• /
• 2008

Geotechnical sites in urban areas may have embedded structures such as utility lines and underground concrete structures, which cause difficulties in site investigation. This study is a preliminary research to establish knowledge base for developing an optimal technique for site investigation in urban areas. Surface-wave method and resistivity survey, which are frequently adopted for non-destructive site-investigation for geotechnical sites, were investigated to characterize effects of adjacent structures. In case of surface wave method, patterns of wave propagation were investigated for typical sets of multi-layered geotechnical profiles by numerical simulation based on forward modeling theory and field experiments for small-size model tests and real-scale tests in the field. In case of resistivity survey, 3-D finite element analyses and field tests were performed to investigate effects of adjacent concrete structures. These theoretical and experimental researches for surface-wave method and resistivity survey resulted in establishing physical criteria to cause interference of adjacent structures in site investigation at urban areas.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.19 no.3
• /
• pp.33-47
• /
• 2017

The purpose of this study is to provide fundamental data for the development of new course on 3D printing in the fashion design department. In order to investigate the perception of and educational needs in 3D printing, the data were collected from 266 students (female 68.8%, male 31.2%) majoring in fashion design aged 18-25 living in the capital area. The results of this survey showed that when investigating perceptions of 3D printing, it was found that 68.8% of answerers had indeed heard of 3D printing. Regarding the path they came to know about 3D printing, mass media such TV was the most frequent answer (54.6%). On the other hand, to the question asking about their intention to take the subject if given, approximately 71% said "Yes". Also, if a modeling class were given, the division that they wanted to explore most in the fashion industry was fashion jewelry. Finally, to the question asking interest in starting a business, 71.1% answered that they had interest. Out of those that answered that they had interest, when questioned about in which field they wanted to start a business, the most frequent answer was fashion online shopping mall. Finally, NCS-based 3D printing courses were suggested in the Fashion Design area. As 3D printing techniques are actively applied to the fashion industry overseas, creative education is needed through the integration of fashion and 3D printing technology by introducing 3D printing related programs in colleges.