• Journal of Advanced Marine Engineering and Technology
• /
• 제26권4호
• /
• pp.485-492
• /
• 2002

The present study is aimed to reveal macroscopic aerodynamic characteristics of two-dimensional rectangular prisms with three aspect ratios(D/H=1, 2 and 3) and six angles of attack($0^{circ}, 10^{circ}, 13.5^{circ}, 20^{circ}, 30^{circ} and 45^{\circ}$). The Reynolds number is fixed as $1\times10^4$. The SOLA-based revised finite difference method for the conservation form on irregular grid was adopted as a new numerical method. Instantaneous flow patterns at $45^{\circ}$ in case of D/H=2 and D/H=3 show larger asymmetric wake development which is closely related to the sharp decrease of drag coefficients at higher angles of attack range. Vorticity propagation into enlarged wake region is conjectured to be responsible for this phenomenon. The Strouhal number is found to be sensitive to the angle of attack at higher aspect ratios(D/H=2 and 3).

• Wind and Structures
• /
• 제21권2호
• /
• pp.183-202
• /
• 2015

Experiments on two-dimensional rectangular prisms with various side ratios (B/D=2, 3, and 4, where B is the along-wind dimension, and D is the across-wind dimension) and rounded corners (R/D=0%, 5%, 10%, and 15%, where R is the corner radius) are reported in this study. The tests were conducted in low-turbulence uniform flow to measure the wind pressures on the surfaces of 12 models for Reynolds numbers ranging from $1.1{\times}10^5$ to $6.8{\times}10^5$. The aerodynamic force coefficients were obtained by integrating the wind pressure coefficients around the model surface. Experimental results of wind pressure distributions, aerodynamic force coefficients, and Strouhal numbers are presented for the 12 models. The mechanisms of the Reynolds number effects are revealed by analyzing the variations of wind pressure distributions. The sensitivity of aerodynamic behavior to the Reynolds number increases with increasing side ratio or rounded corner ratio for rectangular prisms. In addition, the variations of the mean pressure distributions and the pressure correlations on the side surfaces of rectangular prisms with the rounded corner ratio are analyzed at $Re=3.4{\times}10^5$.

• 센서학회지
• /
• 제26권1호
• /
• pp.28-34
• /
• 2017

An NIR grism Si optical area sensor spectrometer with in-band reference wavelength is designed and fabricated. It is composed of a transmission type diffraction grating (spatial density 300 line/mm), a rectangular N-BK7 prism (apex angle 30 degree), NIR filter(cutoff wavelength 720 nm), an imaging convex lens(focal length 50 mm F1.8) and an IR modified DSLR camera (Canon EOS40D) of Si optical area sensor ($3,888{\times}2,592$ pixels, pixel size $5.710{\mu}m$). "In-band reference wavelength function" is implemented using non-dispersive 0th diffraction order optical beam. The NIR grism spectrometer is tested in a laboratory using a halogen lamp and a Neon lamp. And the spectrometer is used in an astronomy field for obtaining the planet Jupiter NIR spectrum. In-band reference wavelength i.e. un-deviation wavelength is 846 nm, an wavelength resolution is 0.3027 nm/pixel, an wavelength resolving power is 2,794 and an wavelength range is 650~1,000 nm.

• 대한치과보철학회지
• /
• 제62권2호
• /
• pp.95-103
• /
• 2024

목적: 디지털 기술이 발전함에 따라 3D 프린팅 기술이 의치상 제작에 활용되고 있으나 적층 제조의 특성상 의치상 표면에 미생물 부착이 증가한다는 단점이 있다. 본 연구는 3D 프린팅 의치상 레진의 항진균성을 개선하기 위하여, 이산화티타늄 나노입자를 각기 다른 중량비로 첨가하였을 때 균사 형태의 Candida albicans에 대한 의치상 레진의 항진균성과 그에 따른 굽힘 강도의 변화에 대해 알아보고자 하였다. 재료 및 방법: 항진균성을 평가하기 위해 3D 프린팅 레진에 이산화티타늄 나노입자를 0.5, 1, 1.5, 2 wt%의 중량비로 혼합하고, 이산화티타늄 나노입자를 포함하지 않은 대조군을 포함해 5개 군을 직경 20 mm 높이 3 mm의 원기둥 형태의 형태로 각각 20개씩 출력하였다. Autogrinder를 이용하여 10개는 연마를 시행하였고, 나머지 10개는 연마를 시행하지 않았다. 각 시편에 균사 형태의 C.albicans를 접종하고, 흡광도와 집락수를 분석하였고, 시편의 표면을 주사전자현미경으로 관찰하였다. 또한, 굽힘 강도 비교를 위해 의치상 레진에 이산화티타늄 나노입자를 0.5, 1, 1.5, 2 wt%의 중량비로 혼합하고, 길이 64 mm, 높이 10 mm, 폭 3 mm 형태(ISO 20795-1)의 시편을 각 군당 20개씩 출력하였고, 만능시험기로 3점 굽힘 강도 시험을 시행하였다. 결과: C.albicans의 집락수와 배양액의 흡광도는 연마를 시행하지 않은 군에서 차이가 없었으나, 연마를 시행한 군에서는 대조군에 비해 감소하였다. 굽힘 강도는 이산화티타늄 나노입자 농도 0, 1, 1.5 wt%에서 증가하였으나 2 wt%에서 1.5 wt%에 비해 감소하였다. 결론: 3D 프린팅 의치상 레진에 이산화티타늄 나노입자를 1.5 wt% 첨가하였을 때, 의치상 레진의 항진균성과 굽힘 강도가 증가하였다.