• 대한조선학회논문집
• /
• 제36권3호
• /
• pp.1-7
• /
• 1999

본 논문에서는 충주호에서 유람선으로 사용되고 있는 광폭천흘수형 선박을 대상으로 선정하고, 공기를 공급하여 선저에 공동을 형성시켜 마찰저항을 감소시킬 수 있도록 선박의 선저형상을 개량하였다. 2차원 공동문제로 이상화하여 선저에 부착되는 공동을 이론적 방법으로 수치해석하여 공기공동의 형상과 내부압력을 추정하였고 공동현상을 지배하는 무차원수를 살펴보았다. 예인수조에서 모형선실험을 시행하고 단의 높이변화, 선측의 공기유출막이벽 등에 의한 공기공동의 형성과 저항감소효과를 조사하였다. 또한 투명한 아크릴로 제작된 선저부를 통해, 선저에 부착되는 공기공동의 발달과정을 관측하였다. 이러한 연구를 통하여, 실선선형의 선저부 형상을 적절히 개량하고 공기를 공급함으로써 설계속도 부근에서 원래선형의 전저항의 25%정도를 줄일 수 있음을 모형선에서 확인하였다.

• Journal of Welding and Joining
• /
• 제27권2호
• /
• pp.69-75
• /
• 2009

The effects of welding speed were investigated on penetration characteristics, defects and mechanical properties including formability test in Nd:YAG laser welded 1000MPa grade DP steels. A shielding gas was not used and bead-on-plate welding was performed with various welding speeds at 3.5kW laser power. Defects of surface and inner beads were not observed in all welding speeds. As the welding speed increased, the weld cross-section varied from the trapezoid having wider bottom bead, through X type, finally to V type in partial penetration range of welding speeds. The characteristic of hardness distribution was also investigated. The center of HAZ had maximum hardness, followed by a slight decrease of hardness as approaching to FZ. Significant softening occurred at the HAZ near BM. Regardless of the welding speed, the weld showed approximately the same hardness distribution. In the perpendicular tensile test with respect to the weld direction, all specimens were fractured at the softening zone. In the parallel tensile test to the weld direction, the first crack occurred at weld center and then propagated into the weld. Good formability over 80% was taken for all welding conditions.

• Advances in Traditional Medicine
• /
• 제10권4호
• /
• pp.304-309
• /
• 2010

Scutellaria pinnatifida A. Hamilt. (Lamiaceae) is an endemic Turkish herb. This plant is also endemic to Iran, and grows abundantly in other central and western Asian countries. Several species of the Scutellaria are known for their traditional uses in the treatment of hypertension, arteriosclerosis, inflammatory diseases, hepatitis, allergy, cancer and diarrhoea. Free-radical-scavenging property, antibacterial activity and brine shrimp toxicity of the n-hexane, dichloromethane (DCM) and methanol (MeOH) extracts of S. pinnatifida were assessed using the 2,2-diphenyl-1-picryl-hydrazyl (DPPH) assay, the resazurin microtitre plate based assay, and the brine shrimp lethality assay, respectively. The DCM and MeOH extracts exhibited free-radical-scavenging property, with the $RC_{50}$ values of 0.362 and 0.127 mg/ml, respectively. Among the solid-phase extraction fractions of the MeOH extract, the 50% aqueous-MeOH fraction showed the highest level of free-radicalscavenging activity ($RC_{50}$ = 0.039 mg/ml). While the DCM extract showed low level of antibacterial activity against Bacillus subtilis and ampicillin-resistant Escherichia coli, the MeOH extract was active against B. cereus, B. subtilis, E. coli and ampicillin-resistant E. coli. However, the minimum inhibitory concentrations (MIC) of the MeOH extract against these bacterial strains were >10 mg/ml. None of the extracts showed any significant toxicity towards brine shrimps ($LD_{50}$ = > 1.00 mg/ml).

• 대한기계학회논문집B
• /
• 제40권2호
• /
• pp.119-126
• /
• 2016

본 연구는 실험적인 방법과 열유동 해석 방법을 사용하여 대용량 압출형 히트싱크의 방열성능에 미치는 열원 대칭배열의 영향을 고찰하고, 이를 바탕으로 제조원가가 낮은 고효율의 히트싱크를 제안하고자 한다. 실험결과를 통해서 유사한 유효 유동단면적을 가지는 경우에 히트싱크의 전열면적이 방열성능에 큰 영향을 줌을 확인할 수 있었으며, 히트싱크의 양면 모두를 이용하는 방열이 훨씬 효과적인 방열이 가능함을 알 수 있었다. 또한, 대칭으로 열원을 배치한 경우가 비대칭 배치보다 효율적으로 방열됨을 알 수 있었다. 해석연구의 결과를 통해서는 실험결과와 정성적으로는 유사한 경향을 확인할 수 있었으며, 실험연구에서 확인하지 못한 질량유량별 및 투입열량별 추이, 단면과 양면 사용의 정량적 비교 등이 가능하였다.

• 대한토목학회논문집
• /
• 제5권3호
• /
• pp.107-115
• /
• 1985

초기(初期)처짐을 가지는 평판(平板)이 일보면내압축하중(一輔面內壓縮荷重)을 받을 때의 거동을 살피기 위하여 새로운 변위함수(變位凾數)를 도입(導入)한 유한대판법(有限帶板法)을 정식화(正式化)하고, 이 이론(理論)에 따라 컴퓨터 프로그램을 편성(編成)하여 여러 경우에 대한 평판(平板)의 거동을 계산(計算)하고 이미 발표된 결과(結果)와 비교해 보았는데 그 요점은 다음과 같다. 1. Curvature effect를 고려하여 면외변위(面外變位)함수로부터 유도한 식을 참고로 하여 새로운 면내변위(面內變位) 함수를 가정하고 이것을 대판요소(帶板要素)의 변위(變位)함수로 사용한 유한대판법(有限帶板法)을 안식화(定式化)하였다. 2. 위에서 안식화(定式化)한 유한대판법(有限帶板法)에 따라 편성(編成)한 프로그램을 써서 수치해석한 결과 변위증분방식(變位增分方式)이 하중증분방식(荷重增分方式)보다 수렴이 빨랐다. 3. 일축압축(一軸壓縮)을 받는 평판(平板)을 여려 경우에 대해 위의방법으로 해석한 결과는 해석적(解析的) 방법(方法)이나 Crisfield(D)에 의(依)한 유한요소법(有限要素法)으로 얻어진 결과와 잘일치 하였다. 따라서 위의 방법은 평판의 비선형해석을 위한 하나의 유용한 방법으로 생각된다.

• Journal of Biosystems Engineering
• /
• 제11권2호
• /
• pp.14-22
• /
• 1986

This study was carried out to find a method which can be used to measure the soil moisture content of the soil bin exactly and quickly. And gypsum block is used as an instrument in measuring soil moisture content in the field of green house farming, etc.. However the characteristics of gypsum block, or the guide line of making gypsum block is not well introduced in Korea. So the information about gypsum block such as the density of gypsum, type of electrode, dimension of electrode, distance between electrodes, density of surrounding soil were included in this study and their effects on the relationship between soil moisture content and electrical resistance were investigated. The results of this study are as follows; 1. The grid type electrode was quicker in accessing the equilibrium condition and showed more sensitive response to the change of soil moisture content than the plate type electrode. 2. The longer the distance between the electrodes, the larger the electrical resistance, and the distance of 3 to 5 mm was recommended. 3. The larger the width of the electrode, the smaller the electrical resistance. However, there was no significance between the levels designed in this study. Considering the size of the gypsum block itself, the adaptible range of width may be 4 to 8 mm. 4. The higher the density of gypsum, the smaller the electrical resistance. And the block of lower density was broken down in the soil of higy moisture content. The optimum ratio of gypsum to water was 7:5. 5. The measuring system used in this study allowed simultaneous, multi-data acquisition. So this system using A/D converter can be applied to the measurement of soil moisture content of soil bin.

• 한국정밀공학회지
• /
• 제33권11호
• /
• pp.943-950
• /
• 2016

The purpose of this study was to evaluate and compare by finite element analysis the biomechanical performance, in terms of cervical stand-alone cage screw insert angle (Type 3 - 5: 2 Screws) and screw arrangement (Type 6 and 7: 3 Screws / Type 8 and 9: 4 Screws), and the range of motion (ROM) of traditional anterior cervical discectomy of a fusion device (Type 1: Cage / Type 2: Cage + ACP). Our study suggests that the biomechanical behavior of a postoperative cervical spine could indeed be influenced by design features, such as screw angle and number of screws. In particular, ROM and the risk of subsidence were more sensitive during extension about type 5 (Insert Angle $20^{\circ}$). Our study also suggested that the number of screw asymmetries between up and down for type 6 and 7 could result in differences in the risk of screw fracture manifesting in different clinical aspects.

• 동력기계공학회지
• /
• 제13권3호
• /
• pp.33-39
• /
• 2009

The aim of this study is to analyze the welds characteristics of the 205 stainless steel pipe for application of street pole material. The welds corrosion behavior of STS 205 pipe in 0.1 N sulphuric acid solution and 5% NaCl solution at room temperature was studied using both salt spray test and potentiodynamic polarization experiment. The morphology and components of corrosion products on surface of STS 205 pipe welds were investigated using SEM/EDX. The tensile strength and yield strength values of STS 205 plate were 715 MPa and 369 MPa respectively. The microvickers hardness values of STS 205 pipe welds were slightly increased than that of STS 304 pipe welds. Corrosion current density($I_{corr.}$) and critical current density($I_{crit.}$) values of STS 205 pipe welds in 3.5% NaCl solution were $1.89{\times}10^{-6}$ $A/cm^2$ and $15.8{\times}10 ^{-6}$ $A/cm^2$. The corrosion resistance of SIS 205 pipe welds was similar to its STS 304 pipe welds. The STS 205 and 304 pipe welds passive films were chromium oxide. Especially, the STS 205 pipe welds showed good corrosion resistance in 0.1 N sulphuric acid. This is attributed to the forming of protective chromium oxide on the surface of STS 205 pipe welds.

• 한국컴퓨터정보학회논문지
• /
• 제12권2호
• /
• pp.123-130
• /
• 2007

본 논문에서는 소동물 생체내 실험시 서로 다른 장비에서 획득된 영상의 융합 및 정합을 위한 방법을 제안한다. 마우스의 꼬리 정맥에 $[[^{18}F]FDG$를 주사하여 60분 섭취후 서로 다른 장비에서 동일한 위치의 영상을 획득하기 위하여 아크릴 재질의 소동물 가이드에 기준마크를 설정하고 microPET과 CT 영상을 획득하였다. MicroPET으로 획득된 리스트모드(list-mode) 데이터는 Fourier Rebinning(FRB) 방법을 사용하여 사이노그램(Sinogram)으로 변환 후 4 번의 반복횟수를 가지는 Ordered Subset Expectation Maximization(OSEM) 알고리즘으로 재구성하였다. MicroPET 영상획득후 PET/CT의 CT를 이용하여 CT영상을 획득하였다. MicroPET 영상에서 폐영역을 정확히 찾아내는 어려움이 있어. 해부학적 정보를 제공하는 CT 영상을 이용하여 폐 영역을 구분하였다. 영상 융합을 위한 불일치 부분을 해결하기 위하여 기준마크의 정보와 폐 영역의 정보를 이용하여 회전과 이동정보를 가지는 어파인 (affine) 변환 행렬 구하여 영상 정합에 사용하였다. 이 방법은 정량적 정확성과 영상 해석의 정확성을 개선할 것으로 기대된다.

• Journal of Welding and Joining
• /
• 제31권2호
• /
• pp.16-20
• /
• 2013

Titanium and its alloys have been widely using in the various field of industry application due to high corrosion resistant properties and mechanical properties. Titanium is highly reactive in the high temperature state and the formation of titanium oxide and porosities in the nuggets of fusion welding will results in the degradation of the mechanical properties. For this reason the studies of friction stir welding for titanium have been investigated recently. The FSW zones of titanium were classified by the weld nugget (WN), the linear transition boundary (TB) and the heat affected zone (HAZ). The WN along with titanium parent was characterized by the presence of twins and dislocations. The average grain size and hardness of WN has been changed according to heat input. The grain refinement resulted from the FSW increased the hardness in the stir zone. Sound dissimilar joints between SUS 304 and CP-Ti were achieved using an advancing speed of 50 mm/min and rotation speeds in the range of 700-1100 rpm. Aluminum 1060 and titanium alloy Ti-6Al-4V plates were lap joined by friction stir welding, hence the ultimate tensile shear strength of joint reached 100% of Al 1060. Mg alloy and Ti were successfully butt joined by inserting a probe into the Mg alloy plate with slightly offsetting. But Ti-Al intermetallic compound layers formed at the interface of these joints.