• Proceedings of the KIEE Conference
• /
• 2005.07c
• /
• pp.2135-2137
• /
• 2005

This paper describes the features of electric and magnetic fields produced by lightning discharges. The measuring system consists of fast electric field sensor, crossed-loop magnetic field sensors, signal processing circuit, A/D converter and data acquisition equipment with a 12bit resolution and 10[MS/s] sampling rate. The frequency bandwidth and responsitivity of the electric field measuring system were 40[Hz]${\sim}$2.6 [MHz] and 2.08 (V/m/mV) and those of the magnetic field measuring system were 400[Hz]${\sim}$1[MHz] and 2.78[nT/mV], respectively. The electric and magnetic fields produced by lightning discharges were observed, and the features and parameters of the waveforms were analyzed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.2
• /
• pp.355-362
• /
• 2015

In this study, we have fabricated 9.385[GHz] circulator that is composed of WR112 waveguide and Ferrite for X-band radar. For designing Ferrite, B/R mode(Below Resonance mode) was used and calculated the condition of 120 degree rotation of the electric field in Ferrite and calculated internal DC magnetic field and external DC magnetic field. Also, dielectric materials of the same shape with Ferrite was filled between two Ferrite for improving the performance of the circulator, including impedance matching, bandwidth, quality factor, insertion loss. To obtain optimum shape of the Ferrite and dielectric material, we used CST MWS. Simulation result of the circulator is that 1.02 : 1 VSWR, -40dB isolation, 0.2dB insertion loss and measurement result is that 1.03 : 1, -38dB, 1.2dB at 9.385[GHz]. We can get good agreement at isolation and VSWR, but insertion loss was 1 dB great than simulation result.

• The Journal of Korea Robotics Society
• /
• v.13 no.3
• /
• pp.190-197
• /
• 2018

Geomagnetic field signals have potential for use in underwater navigation and geophysical surveys. To map underwater geomagnetic fields, we propose a method that exploits an autonomous surface vehicle. In our system, a magnetometer is rigidly attached to the vehicle and not towed by a cable, minimizing the system's size and complexity but requiring a dedicated calibration procedure due to magnetic distortion caused by the vehicle. Conventional 2D methods can be employed for the calibration by assuming the horizontal movement of the magnetometer, whereas the proposed 3D approach can correct for horizontal misalignment of the sensor. Our method does not require a supporting crane system to rotate the vehicle, and calibrates and maps simultaneously by exploiting data obtained from field operation. The proposed method has been verified experimentally in inland waters, generating a magnetic field map of the test area that is of much higher resolution than the public magnetic field data.

• The Bulletin of The Korean Astronomical Society
• /
• v.36 no.1
• /
• pp.33.2-33.2
• /
• 2011

The anisotropic nature of the magnetic turbulence associated with magnetic dipolarizations in the Earth's plasma sheet is examined. Specifically we determine the power spectral indices for the perpendicular and parallel components of the fluctuating magnetic field with respect to the background magnetic field and compare them to determine possible anisotropic features. For this study, we identify a total of 47 dipolarization events from February 2008 using the magnetic field observations by the THEMIS A, D and E satellites when they are situated closely near the neutral sheet in the near-Earth tail. For the identified events, we estimate the spectral indices for the frequency range from 1.3 mHz to 42 mHz. The results show that for many events the spectral indices are larger for fluctuations in the ${\Psi}$ direction than for those in the other two directions, where the ${\Psi}$ direction is perpendicular to the background magnetic field line and to the azimuthal direction. This implies that the dipolarization-associated turbulence of the magnetic field is often anisotropic. We discuss how this result differs from what is expected from the theory of homogeneous, anisotropic, MHD turbulence.

• Proceedings of the Korea Institute of Applied Superconductivity and Cryogenics Conference
• /
• 2002.02a
• /
• pp.312-314
• /
• 2002

Magnetic circuit design of HTS (High Temperature Superconducting) motor is important to achieve the power at a given load condition, and it is essential to the thermal design for HTS motor rotors. To determine the result of thermal design, the magnetic field distribution has to be known exactly. On the basis of the 2 dimensional magnetic field analysis, the magnetic field distributions due to several cases are calculated by using Biot-Savart equation and magnetic image method. And the I$_{c}$ of HTS field coil was calculated by using I$_{c}$-B(equation omitted) curve and 3D FEA(Finite Element Analysis).is).

• Journal of applied mathematics & informatics
• /
• v.41 no.2
• /
• pp.401-411
• /
• 2023

The effects of longitudinal velocity dusty fluid flow in a weak magnetic field are investigated in this paper. An external uniform magnetic field parallel to the flow of dusty fluid influences the flow of dusty fluid. Besides that, the problem under investigation is completely defined in terms of identifying parameters such as longitudinal velocity (u), Hartmann number (M), dust particle interactions β, stock resistance γ, Reynolds number (Re) and magnetic Reynolds number (Rm). While using suitable transformations of resemblance, The governing partial differential equations are transformed into a system of ordinary differential equations. The Hankel Transformation is used to solve these equations numerically. The effects of representing parameters on the fluid phase and particle phase velocity flow are investigated in this analysis. The magnitude of the fluid particle is reduced significantly. The result indicates the magnitude of the particle reduced significantly. Although some of our numerical solutions agree with some of the available results in the literature review, other results differs because of the effect of the introduced magnetic field.

• Proceedings of the KIEE Conference
• /
• 2003.07b
• /
• pp.768-770
• /
• 2003

A superconducting synchronous motor has different electromagnetic structure from the conventional machine. With the help of superconductor having much higher operating current density than normal conductor, superconducting motor can eliminate most of iron core filled inside of the conventional machine. This air-cored structure could be analysed and designed theoretically based on 2-dimensional(2-D) magnetic field distribution assuming that the windings are extended infinitely toward the axial direction. However, the actual structure of superconducting motor has the end regions interconnecting the straight parts of the same cross-section with the 2-D model. Therefore, this actual 3-D model has smaller field distribution than the 2-D model. In this paper, we consider the effect of the end regions on the output of a HTS model motor and suggest more accurate design approach through comparison of 2-D and 3-D magnetic field analysis results.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.3
• /
• pp.926-931
• /
• 2014

This paper presents the torque calculation and parametric analysis of synchronous permanent magnet couplings (SPMCs). Based on a magnetic vector potential, we obtained the analytical magnetic field solutions produced by permanent magnets (PMs). Then, the analytical solutions for a magnetic torque were obtained. All analytical results were extensively validated with the non-linear a two-dimensional (2D) finite element analysis (FEA). In particular, test results such as torque measurements are presented that confirm the analysis. Finally, using the derived analytical magnetic torque solutions, we carried out a parametric analysis to determine the influence of the design parameters on the SPMC's behavior.

• The Bulletin of The Korean Astronomical Society
• /
• v.44 no.2
• /
• pp.69.2-69.2
• /
• 2019

To construct a coronal force-free magnetic field, we must impose the boundary normal current density (or three components of magnetic field) as well as the boundary normal field at the photosphere as boundary conditions. The only method that is known to implement these boundary conditions exactly is the method devised by Grad and Rubin (1958). However, the Grad-Rubin method and all its variations (including the fluxon method) suffer from convergence problems. The magnetofrictional method and its variations are more robust than the Grad-Rubin method in that they at least produce a certain solution irrespective of whether the global solution is compatible with the imposed boundary conditions. More than often, the influence of the boundary conditions does not reach beyond one or two grid planes next to the boundary. We have found that the 2D solenoidal gauge condition for vector potentials allows us to implement the required boundary conditions easily and effectively. The 2D solenoidal condition is translated into one scalar function. Thus, we need two scalar functions to describe the magnetic field. This description is quite similar to the Chandrasekhar-Kendall representation, but there is a significant difference between them. In the latter, the toroidal field has both Laplacian and divergence terms while in ours, it has only a 2D Laplacian term. The toroidal current density is also expressed by a 2D Laplacian. Thus, the implementation of boundary normal field and current are straightforward and their effect can permeate through the whole computational domain. In this paper, we will give detailed math involved in this formulation and discuss possible lateral and top boundary conditions and their meanings.

• Journal of Magnetics
• /
• v.7 no.2
• /
• pp.45-50
• /
• 2002

A magnetic field annealing is firstly used for nanostructured Sm-Co/Co films, prepared by magnetron sputtering method. The effects of magnetic field annealing on single-layered Sm-Co films are different from those on multi-layered Sm-Co/Co films. A detailed analysis of microstructures and magnetic properties is made by means of HRTEM, Auger electron spectroscopy, XRD and Physical Property Measurement System (PPMS). From magnetic properties and microstructure analysis, it was confirmed that these differences originate from the effects of magnetic field annealing on crystallization behavior of the films. The relationship between magnetic properties and microstructures explains a different demagnetization process of single-layered and multilayered films. For the single-layered Sm-Co films, magnetic-field-annealing makes the main phases change from $CaCu_5/ to Zn_2Th_{17}$ structure, resulting in a decrease of coercivity. The results show that the magnetic-field-annealing is useful to improve the properties of nanostructured Sm-Co(30 nm)/Co(10 nm) films, which ascribe to improving the pinning effectiveness in coercivity mechanism and decreasing the magnetostatic interaction of films. A very high coercivity about 0.7 T was obtained from nanoscaled multi-layered Sm-Co(30 nm)-/Co(10 nm) films.