• The KIPS Transactions:PartB
• /
• v.16B no.3
• /
• pp.203-214
• /
• 2009

In this paper, we could simply compute the user's gaze position based on 2D relations between the pupil center and four corneal specular reflections formed by four IR-illuminators attached on each corner of a monitor, without considering the complex 3D relations among the camera, the monitor, and the pupil coordinates. Therefore, the objectives of our paper are to detect the pupil center and four corneal specular reflections exactly and to compensate for error factors which affect the gaze accuracy. In our method, we compensated for the kappa error between the calculated gaze position through the pupil center and actual gaze vector. We performed one time user calibration to compensate when the system started. Also, we robustly detected four corneal specular reflections that were important to calculate gaze position based on Kalman filter irrespective of the abrupt change of eye movement. Experimental results showed that the gaze detection error was about 1.0 degrees though there was the abrupt change of eye movement.

• Journal of Broadcast Engineering
• /
• v.11 no.1 s.30
• /
• pp.80-90
• /
• 2006

A simple 2D gaze tracking method using single camera and Purkinje image is proposed. This method employs single camera with infrared filter to capture one eye and two infrared light sources to make reflection points for estimating corresponding gaze point on the screen from user's eyes. Single camera, infrared light sources and user's head can be slightly moved. Thus, it renders simple and flexible system without using any inconvenient fixed equipments or assuming fixed head. The system also includes a simple and accurate personal calibration procedure. Before using the system, each user only has to stare at two target points for a few seconds so that the system can initiate user's individual factors of estimating algorithm. The proposed system has been developed to work in real-time providing over 10 frames per second with XGA $(1024{\times}768)$ resolution. The test results of nine objects of three subjects show that the system is achieving an average estimation error less than I degree.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.44 no.2 s.314
• /
• pp.55-62
• /
• 2007

This paper proposes method to get exquisite third dimension data removing included noise by error that occur in third dimension reconstruction through camera auto-calibration. Though reconstructing third dimension data by previous noise removing method, mesh that area is wide is happened problem by noise. Because mesh's area is important, the proposed algorithm need preprocessing that remove unnecessary triangle meshes of acquired third dimension data. The research analyzes the characteristics of noise using the area information of 3-dimensional meshes, separates a peek noise and a Gauss noise by its characteristics and removes the noise effectively. We give a quantitative evaluation of the proposed preprocessing filter and compare with the mesh smoothing procedures. We demonstrate that our effective preprocessing filter outperform the mesh smoothing procedures in terms of accuracy and resistance to over-smoothing.

• Journal of the Korea Computer Graphics Society
• /
• v.18 no.2
• /
• pp.1-8
• /
• 2012

High dynamic range (HDR) images represent a far wider numerical range of exposures than common digital images. Thus it can accurately store intensity levels of light found in the specific scenes generated by light sources in the real world. Although a kind of professional HDR cameras which support fast accurate capturing has been developed, high costs prevent from employing those in general working environments. The common method to produce a HDR image with lower cost is to take a set of photos of the target scene with a range of exposures by general purpose cameras, and then to transform them into a HDR image by commercial softwares. However, the method needs complicate and accurate camera calibration processes. Furthermore, creating HDR environment maps which are used to produce high quality imaging contents includes delicate time-consuming manual processes. In this paper, we present an automatic HDR panorama environment map generating system which was constructed to make the complicated jobs of taking pictures easier. And we show that our system can be effectively applicable to photo-realistic compositing tasks which combine 3D graphic models with a 2D background scene using image-based lighting techniques.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.2430-2434
• /
• 2005

Automatic FPC punching instrument for the improvement of working condition and cost saving is introduced in this paper. FPC(flexible printed circuit) is used to detect the contact position of K/B and button like a cellular phone. Depending on the quality of the printed ink and position of reference punching point to the FPC, the resistance and current are varied to the malfunctioning values. The size of reference punching point is 2mm and the above. Because the punching operation is done manually, the accuracy of the punching degree is varied with operator's condition. Recently, The punching accuracy has deteriorated severely to the 2mm punching reference hall so that assembly of the K/B has hardly done. To improve this manual punching operation to the FPC, automatic FPC punching system is introduced. Precise mechanical parts like a 5-step stepping motor and ball screw mechanism are designed and tested and low cost PC camera is used for the sake of cost down instead of using high quality vision systems for the FA. 3D Mechanical design tool(Pro/E) is used to manage the exact tolerance circumstances and avoid design failures. Simulation is performed to make the complete vision based punching machine before assembly, and this procedure led to the manufacturing cost saving. As the image processing algorithms, dilation, erosion, and threshold calculation is applied to obtain an exact center position from the FPC print marks. These image processing algorithms made the original images having various noises have clean binary pixels which is easy to calculate the center position of print marks. Moment and Least square method are used to calculate the center position of objects. In this development circumstance, Moment method was superior to the Least square one at the calculation of speed and against noise. Main control panel is programmed by Visual C++ and graphical Active X for the whole management of vision based automatic punching machine. Operating modes like manual, calibration, and automatic mode are added to the main control panel for the compensation of bad FPC print conditions and mechanical tolerance occurring in the case of punch and die reassembly. Test algorithms and programs showed good results to the designed automatic punching system and led to the increase of productivity and huge cost down to law material like FPC by avoiding bad quality.

• KIPS Transactions on Software and Data Engineering
• /
• v.10 no.7
• /
• pp.279-286
• /
• 2021

Recently, We are carrying out a policy of physical distancing of at least 1m from each other to prevent the spreading of COVID-19 disease in public places. In this paper, we propose a method for measuring distances between people in real time and an automation system that recognizes objects that are within 1 meter of each other from stereo images acquired by drones or CCTVs according to the estimated distance. A problem with existing methods used to estimate distances between multiple objects is that they do not obtain three-dimensional information of objects using only one CCTV. his is because three-dimensional information is necessary to measure distances between people when they are right next to each other or overlap in two dimensional image. Furthermore, they use only the Bounding Box information to obtain the exact coordinates of human existence. Therefore, in this paper, to obtain the exact two-dimensional coordinate value in which a person exists, we extract a person's key point to detect the location, convert it to a three-dimensional coordinate value using Stereo Vision and Camera Calibration, and estimate the Euclidean distance between people. As a result of performing an experiment for estimating the accuracy of 3D coordinates and the distance between objects (persons), the average error within 0.098m was shown in the estimation of the distance between multiple people within 1m.