• 환경위생공학
• /
• 제8권2호
• /
• pp.25-48
• /
• 1993

International concern over the environmental pollution is ever increasing, and diversified countermeasures must be devised in Korea also. Global trend, damages, problems and countermeasures with respect to issues mentioned in the Rio Declaration, such as prevention of ozone layer destruction, reduction of migratory atmospheric pollution between neighboring countries, and prevention of global greenhouse effect, were discussed in this report. Conclusion of the report is summarized as follows : A. Measurement, Planning and Monitoring (1) Development and implementation of a global network for measurement and monitoring from the global aspects such factors as related to acid rain(Pioneer substances, pH, sulfate, nitrate), effect of global temperature(Air temperature, $CO_2$, $CH_4$, CFC, $N_2O$) and destruction of ozone layer($CFC_S$). (2) Establishment of network system via satellite monitoring movement of regional air mass, damage on the ozone layer and ground temperature distribution. B. Elucidation of Present State (1) Improvement and development of devices for carbon circulation capable of accurately forecasting input and output of carbon. (2) Developmental research on chemical reactions of greenhouse gas in the air. (3) Improvement and development of global circulation model(GCM) C. Impact Assessment Impact assessment on ecosystem, human body, agriculture, floodgate, land use, coastal ecology, industries, etc. D. Preventive Measures and Technology Development (1) Development and consumption of new energy (2) Development of new technology for removal of pioneer substances (3) Development of substitute matter for $CFC_S$ (4) Improvement of agriculture and forestry means to prevent the destruction of ozone layer and the greenhouse effect of the globe (5) Improvement of housing to prevent the destruction of ozone layer and the greenhouse effect of the globe (6) Development of new technology for probing underground water (7) Preservation of forest (8) Biomass 5. Policy Development (1) Development of strategy model (2) Development of long term forecast model (3) Development of penalty charge effect and expense evaluation methods (4) Feasibility study on regulations By establishing the above mentioned measures for environmentally sound and sustainable development to establish the right to live for humankind and to preserve the one and only earth.

• 대한교통학회지
• /
• 제31권5호
• /
• pp.37-47
• /
• 2013

본 연구에서는 현재 대두되고 있는 온실가스 저감에 초점을 맞추어 고속도로상에 배출되고 있는 $CO_2$에 대해 정부정책 목표를 기준에 따른 전기차 보급전망과 2010년 기준 배출 현황을 토대로 장래 분석(2020년)을 하였다. 연구에서 수행한 주요 내용은 다음과 같다. 첫째, 고속도로에서 배출하는 온실가스의 경우 2010년 기준으로 약 17.3백만톤의 $CO_2$ 배출량이 발생하는 것으로 나타났으며, 이후 2015년 17.4백만톤, 2020년 16.2백만톤으로 분석되었다. 이러한 패턴의 결과는 KTDB 상의 O/D의 영향과 교통량 변화가 2015년 이후 2020년까지 증가하다가 2020년부터 감소하는 추세가 반영된 결과이다. 둘째, 전기차 보급전망에 따라 배출된 온실가스의 경우에는 2015년은 17.1백만톤으로 미시행(전기차 반영없음) 대비 약 2.0%의 저감효과가 발생되는 것으로 분석되었으며, 2020년에는 14.2백만톤으로 미시행 대비 약 12.8% 저감효과가 분석된 것을 알 수 있었다.

• Journal of Ship and Ocean Technology
• /
• 제6권4호
• /
• pp.1-12
• /
• 2002

A control system for an automated line heating process is developed by use of object-oriented methodology. The main function of the control system is to provide real-time heating information to technicians or automated machines. The information includes heating location, torch speed, heating order, and others. The system development is achieved by following the five steps in the object-oriented procedure. First, requirements are specified and corresponding objects are determined. Then, the analysis, design, and implementation of the proposed system are sequentially carried out. The system consists of six subsystems, or modules. These are (1) the inference module with an artificial neural network algorithm, (2) the analysis module with the Finite Element Method and kinematics analysis, (3) the data access module to store and retrieve the forming information, (4) the communication module, (5) the display module, and (6) the measurement module. The system is useful, irrespective of the heating sources, i.e. flame/gas, laser, or high frequency induction heating. A newly developed automated line heating machine is connected to the proposed system. Experiments and discussions follow.

• 한국자동차공학회논문집
• /
• 제17권2호
• /
• pp.118-125
• /
• 2009

Calculation of indicated mean effective pressure(IMEP) requires high cylinder pressure sampling rate and heavy computational load. Because of that, it is difficult to implement in a conventional electronic control unit. In this paper, a cylinder pressure based real-time IMEP estimation method is proposed for controller implementation. Crank angle at 10-bar difference pressure($CA_{DP10}$) and cylinder pressure difference between $60^{\circ}$ ATDC and $60^{\circ}$ BTDC($DP_{deg}$) are used for IMEP estimation. These pressure variables can represent effectively start of combustion(SOC) and fuel injection quantity respectively. The proposed IMEP estimation method is validated by transient engine operation using a common-rail direct injection diesel engine.

• 대한전자공학회논문지SD
• /
• 제41권9호
• /
• pp.65-71
• /
• 2004

본 논문은 휴대폰의 자동차 핸즈프리를 위한 음향반향제거기의 설계 및 구현에 관한 것이다. 이를 구현하기 위해 효율적인 적응 알고리즘의 개발과 VHDL 회로설계, 그리고 테스트 보드 제작 등을 수행하였다. 적응 알고리즘은 간단하고 안정적이며 수렴속도가 빠른 새로운 S-LMS 알고리즘을 사용하였다 음향반향제거기는 15-bit, 128-tap 회로구조로서 50,000 게이트급 FPGA에 구현하였다. 그리고 회로동작을 검증하기 위하여 보드를 제작하였는데, 2개의 CODEC과 제어입력용 DIP 스위치 및 출력표시용 LED 등이 포함되어 있다. 백색 가우스잡음을 사용하여 시험한 결과, 구현된 회로의 ERLE는 최대 30dB의 반향제거 성능을 나타내는 것으로 확인되었다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 Proceedings ICPE 01 2001 International Conference on Power Electronics
• /
• pp.355-359
• /
• 2001

This paper presents an implementation of digital control system of speed sensorless for Reluctance Synchronous Motor (RSM) drives with DTC. The control system consists of stator flux observer, rotor position/speed/torque estimator, two hysteresis band controllers, an optimal switching look-up table, IGBT voltage source inverter, and TMS320C31 DSP controller by using fully integrated control software. The stator flux observer is based on the combined voltage and current model with stator flux feedback adaptive control that inputs are current and voltage sensing of motor terminal with estimated rotor angle for wide speed range. The rotor position is estimated by observed stator flux-linkage space vector. The estimated rotor speed is determined by differentiation of the rotor position used only in the current model part of the flux observer for a low speed operating area. It does not require the knowledge of any motor parameters, nor particular care for motor starting, In order to prove the suggested control algorithm, we have a simulation and testing at actual experimental system. The developed sensorless control system is shown a good speed control response characteristic results and high performance features in 50/1000 rpm with 1.0Kw RSM having 2.57 ratio of d/q reluctance.

• 한국공간정보시스템학회 논문지
• /
• 제11권2호
• /
• pp.63-72
• /
• 2009

Korean Land Spatialization Program (KLSP) is an R&D program of the National GIS Project for developing ubiquitous GIS technologies under the control of the M inistry of Land, Transport and Maritime Affairs (M LTM). The first program of the KLSP, which lasts from 2006 to 2012, initiated with $132 million of national funds and $42 million of private matching funds. Aiming to develop the 'Innovation of GIS technology for ubiquitous Korean land', the KLSP consists of five core research projects and one research coordination project to practically utilize and commercialize the results of core research projects. The Korean Land Spatialization Group (KLSG) is planning the KLSP Test-Bed for testing, integrating, and exhibiting the KLSP's outcomes. About 40% of the outcomes are related products to geo-sensor and wireless sensor network (W SN). Thus, interoperable, scalable and web accessible frameworks like an OGC SWE (Open Geospatial Consortium Sensor Web Enablement) are mandatory because some of the products must be connected to each other in a KLSG Test-Bed. The main objective of this paper is to introduce the KLSP Test-Bed and the SWE SOS (Sensor Observation Service) prototype, which is developed for interoperable geo-sensor networks of the KLSP.

• 한국가스학회지
• /
• 제3권2호
• /
• pp.24-33
• /
• 1999

충전소에서 일어난 사고를 1987부터 1998년까지 사고자료를 근거로 하여 사고 시나리오와 사고발생 초기의 피해거리를 살펴보고, 이를 바탕으로 국내$\cdot$외 안전거리를 비교$\cdot$검토하여 적절한 안전거리에 대하여 살펴보았다. 안전거리는 시설과의 최소한 이격거리를 두어 사고 발생시 점화가능성을 줄이고 원활한 방재활동과 피해확산을 방지하기 위한 것으로서 가스누출시 제트화재의 길이 또는 누출가스의 연소하한농도의 도달거리와 관계가 있으며, 안전장치 설치현황, 안전관리자의 의식수준, 그리고 경제성을 검토하여 안전거리를 결정할 수 있도록 저장량에 따른 안전거리의 범위를 제시하였다.

• 한국IT서비스학회지
• /
• 제8권2호
• /
• pp.89-115
• /
• 2009

A Technology Roadmap (TRM) is extensively used as a tool to manage activities of researching and developing technologies and products that can help a business achieve its goals. However, most of past studies on TRMs have limited themselves to developing in a single product or a single industry level. Few research studies have examined how TRM are used for convergence products and services for future development. The aim of this chapter is to introduce a TRM development methodology for u-City technologies and to consider its possible application at the R&D program level in Korea. This research suggests ways to develop a TRM in u-City development by segmenting u-City technologies, projecting TRM for each technology and designing TRM templates for evaluating both current and future technologies. In addition, the study further highlights to prioritize which technology is favorable for the implementation based on its economic feasibility and technological maturity.

• STI Policy Review
• /
• 제6권1호
• /
• pp.24-35
• /
• 2015

This research constructs a data set regarding competition policy through a comprehensive review of previous studies, and performs a meta-analysis to quantitatively assess the price effects of deregulation. A structural econometric model is used to eliminate possible biases from heterogeneity of the studies,such as in publication types and measurement methods. Four types of regulations that deter competition are characterized and three groups of industries are made for drawing practical implications. We fnd that deregulation to promote competition reduces prices by 0.23% and that these estimated price effects are more stable when we control for the publication types and measurement ways. Easing regulations that restrict consumers' choice is shown to be most effcient in promoting competition, lowering prices by 0.7%. This is followed by eliminating the limitation in the number of frms in the industry, with 0.2% price reduction. Overall, the network and service industries are shown to be more responsive to deregulation than the R&D industry. These results could shed light on policy implementation when a pro-competition policy is called for due to restrictive regulations in the corresponding industries.