• Journal of Ship and Ocean Technology
• /
• v.6 no.4
• /
• pp.1-12
• /
• 2002

A control system for an automated line heating process is developed by use of object-oriented methodology. The main function of the control system is to provide real-time heating information to technicians or automated machines. The information includes heating location, torch speed, heating order, and others. The system development is achieved by following the five steps in the object-oriented procedure. First, requirements are specified and corresponding objects are determined. Then, the analysis, design, and implementation of the proposed system are sequentially carried out. The system consists of six subsystems, or modules. These are (1) the inference module with an artificial neural network algorithm, (2) the analysis module with the Finite Element Method and kinematics analysis, (3) the data access module to store and retrieve the forming information, (4) the communication module, (5) the display module, and (6) the measurement module. The system is useful, irrespective of the heating sources, i.e. flame/gas, laser, or high frequency induction heating. A newly developed automated line heating machine is connected to the proposed system. Experiments and discussions follow.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.17 no.2
• /
• pp.118-125
• /
• 2009

Calculation of indicated mean effective pressure(IMEP) requires high cylinder pressure sampling rate and heavy computational load. Because of that, it is difficult to implement in a conventional electronic control unit. In this paper, a cylinder pressure based real-time IMEP estimation method is proposed for controller implementation. Crank angle at 10-bar difference pressure($CA_{DP10}$) and cylinder pressure difference between $60^{\circ}$ ATDC and $60^{\circ}$ BTDC($DP_{deg}$) are used for IMEP estimation. These pressure variables can represent effectively start of combustion(SOC) and fuel injection quantity respectively. The proposed IMEP estimation method is validated by transient engine operation using a common-rail direct injection diesel engine.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.9
• /
• pp.65-71
• /
• 2004

This paper describes a new adaptive algorithm which can reduce the required computation quantities in the adaptive filter. The proposed S-LMS algorithm uses only the signs of the normalized input signal rather than the input signals when coefficients of the filter are adapted. By doing so, there is no need for the multiplications and divisions which are mostly responsible for the computation quantities. To analyze the convergence characteristics of the proposed algorithm, the condition and speed of the convergence are derived mathematically. Also, we simulate an echo canceller adopting this algorithm and compare the performances of convergence for this algorithm with the ones for the other algorithm. As the results of simulations, it is proved that the echo canceller adopting this algorithm shows almost the same performances of convergence as the echo canceller adopting the SIA algorithm.

• Proceedings of the KIPE Conference
• /
• 2001.10a
• /
• pp.355-359
• /
• 2001

This paper presents an implementation of digital control system of speed sensorless for Reluctance Synchronous Motor (RSM) drives with DTC. The control system consists of stator flux observer, rotor position/speed/torque estimator, two hysteresis band controllers, an optimal switching look-up table, IGBT voltage source inverter, and TMS320C31 DSP controller by using fully integrated control software. The stator flux observer is based on the combined voltage and current model with stator flux feedback adaptive control that inputs are current and voltage sensing of motor terminal with estimated rotor angle for wide speed range. The rotor position is estimated by observed stator flux-linkage space vector. The estimated rotor speed is determined by differentiation of the rotor position used only in the current model part of the flux observer for a low speed operating area. It does not require the knowledge of any motor parameters, nor particular care for motor starting, In order to prove the suggested control algorithm, we have a simulation and testing at actual experimental system. The developed sensorless control system is shown a good speed control response characteristic results and high performance features in 50/1000 rpm with 1.0Kw RSM having 2.57 ratio of d/q reluctance.

• Journal of Korea Spatial Information System Society
• /
• v.11 no.2
• /
• pp.63-72
• /
• 2009

Korean Land Spatialization Program (KLSP) is an R&D program of the National GIS Project for developing ubiquitous GIS technologies under the control of the M inistry of Land, Transport and Maritime Affairs (M LTM). The first program of the KLSP, which lasts from 2006 to 2012, initiated with $132 million of national funds and $42 million of private matching funds. Aiming to develop the 'Innovation of GIS technology for ubiquitous Korean land', the KLSP consists of five core research projects and one research coordination project to practically utilize and commercialize the results of core research projects. The Korean Land Spatialization Group (KLSG) is planning the KLSP Test-Bed for testing, integrating, and exhibiting the KLSP's outcomes. About 40% of the outcomes are related products to geo-sensor and wireless sensor network (W SN). Thus, interoperable, scalable and web accessible frameworks like an OGC SWE (Open Geospatial Consortium Sensor Web Enablement) are mandatory because some of the products must be connected to each other in a KLSG Test-Bed. The main objective of this paper is to introduce the KLSP Test-Bed and the SWE SOS (Sensor Observation Service) prototype, which is developed for interoperable geo-sensor networks of the KLSP.

• Journal of the Korean Institute of Gas
• /
• v.3 no.2 s.7
• /
• pp.24-33
• /
• 1999

The minimum safe separation distances from LPG filling station was discussed in this work based on the accident data from 1987 to 1998 in south korea, the initial damage of accident, and standards of countries. The safety distances are adequate to reduce ignition probability by released gas and provide space for implementation of emergency response after ignition. Therefore, the distances are related to the distance to LFL(Lower Flammable Limit) and the length of jet fire to prevent accident escalation. The range of the distance was suggested in this work to make standard with considering economic, culture, and safe guards.

• Journal of Information Technology Services
• /
• v.8 no.2
• /
• pp.89-115
• /
• 2009

A Technology Roadmap (TRM) is extensively used as a tool to manage activities of researching and developing technologies and products that can help a business achieve its goals. However, most of past studies on TRMs have limited themselves to developing in a single product or a single industry level. Few research studies have examined how TRM are used for convergence products and services for future development. The aim of this chapter is to introduce a TRM development methodology for u-City technologies and to consider its possible application at the R&D program level in Korea. This research suggests ways to develop a TRM in u-City development by segmenting u-City technologies, projecting TRM for each technology and designing TRM templates for evaluating both current and future technologies. In addition, the study further highlights to prioritize which technology is favorable for the implementation based on its economic feasibility and technological maturity.

• STI Policy Review
• /
• v.6 no.1
• /
• pp.24-35
• /
• 2015

This research constructs a data set regarding competition policy through a comprehensive review of previous studies, and performs a meta-analysis to quantitatively assess the price effects of deregulation. A structural econometric model is used to eliminate possible biases from heterogeneity of the studies,such as in publication types and measurement methods. Four types of regulations that deter competition are characterized and three groups of industries are made for drawing practical implications. We fnd that deregulation to promote competition reduces prices by 0.23% and that these estimated price effects are more stable when we control for the publication types and measurement ways. Easing regulations that restrict consumers' choice is shown to be most effcient in promoting competition, lowering prices by 0.7%. This is followed by eliminating the limitation in the number of frms in the industry, with 0.2% price reduction. Overall, the network and service industries are shown to be more responsive to deregulation than the R&D industry. These results could shed light on policy implementation when a pro-competition policy is called for due to restrictive regulations in the corresponding industries.

• KSTLE International Journal
• /
• v.4 no.2
• /
• pp.37-42
• /
• 2003

One of the obstacles for a magnetic bearing to be used in the wide range of industrial applications is the failure modes associated with magnetic bearings, which we don't expect for conventional passive bearings. These failure modes include electric power outage, power amplifier faults, position sensor faults, and the malfunction of controllers. Fault-tolerant magnetic bearing systems have been proposed so that the system can operate in spite of some faults in the system. In this paper, we designed a fault-tolerant magnetic bearing system for a turbo-molecular vacuum pump. The system can cope with the actuator/amplifier faults which are the most common faults in a magnetic bearing system. We implemented the existing fault-tolerant algorithms to experimentally prove the adequacy of the algorithms for industrial applications. As it turns out, the system can operate even with three simultaneously failing poles out of eight actuator poles.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.10 no.4
• /
• pp.169-176
• /
• 2010

We propose a Z-HBT line coding for a LED-ID system. Z-HBT line coding is defined as follows. First, we apply half bit transition to one bit. Second, we decode encoded bits using difference of bit transition level in one bit duration. As a result, we obtain advantages about synchronization problem and noise effect mitigation at the receiver. We set up outdoor the LED-ID simulation environment. At simulation results, we show 2-3dB gain as compared with existing line coding schemes. The results of the paper can be applied to design and implementation of LED-ID systems for indoor wireless multimedia services.