• Journal of KIBIM
• /
• v.11 no.4
• /
• pp.42-52
• /
• 2021

Paneling building facades is one of the essential procedures in building construction. Traditionally, it has been an easy task of simply projecting paneling patterns drawn in drawing boards onto 3d building facades. However, as many organic or curved building shapes are designed and constructed in modern architectural practices, the traditional one-to-one projection is becoming obsolete for the building types of the kind. That is primarily because of the geometrical discrepancies between 2d drawing boards and 3d curved building surfaces. In addition, curved compound surfaces are often utilized to accommodate the complicated spatial programs, building codes, and zoning regulations or to achieve harmonious geometrical relationships with neighboring buildings in highly developed urban contexts. The use of the compound surface apparently makes the traditional paneling pattern projection more challenging. Various mapping technics have been introduced to deal with the inabilities of the projection methods for curved facades. The mapping methods translate geometries on a 2d surface into a 3d building façade at the same topological locations rather than relying on Euclidean or Affine projection. However, due to the intrinsic differences of the planar 2d and curved 3d surfaces, the mapping often comes with noticeable distortions of the paneling patterns. Thus, this paper proposes a practical method of drawing paneling patterns directly on a curved compound surface utilizing Geodesic, which is faithful to any curved surface, to minimize unnecessary distortions.

• Spatial Information Research
• /
• v.18 no.5
• /
• pp.47-54
• /
• 2010

Until recently, GIS technology was mainly based on 2D for disaster management. Necessity of 3D spatial information came to the fore with a speedy and accurate response system in disaster management. However, most fire-fighting facilities presently use CAD with 2D formation, Image drawings, and conception of construction data's formation. It is not about the drawings in map production. It's about varieties of construction ways or contents. In this study, we are proposing the ways on analyzing the existing disaster management targets for 2D technology drawings, designing the 3D spatial information data model, and transforming the effective 3D spatial information into algorithm and dimension spatial information construction for easily building on mass 2D architectural drawings to 3D spatial information effectively in disaster management. We can maxim ize efficient construction time and expenses. Then what is proposed in this study about constructing 3D spatial information for manual work, and it's significance for improving decisive decisions and utilizing the tasks to prevent, prepare, respond and restore steps in disaster management.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.7
• /
• pp.1303-1311
• /
• 2009

This paper describes a new visual VR authoring tool called DEVISE (Drawing Environment for VR-based Inquiry-learning Science Education) which is designed to support scientific inquiry learning. DEVISE allows users with no programming expertise to easily build the science inquiry learning VR contents by using 2D drawing interface to place 3D objects and specify properties of the virtual worlds or objects. This paper first describes the related works of VR authoring tools and inquiry learning virtual environments. It also explains SASILE, an integrated virtual environment system for supporting science inquiry learning, and its problems. Then, it describes DEVISE system components and its workflow, and it discusses the observation results of user evaluations of developing science inquiry-learning VR contents.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.1
• /
• pp.531-537
• /
• 2023

Interior construction is required to estimate the quantity of material and the cost expected from 2D drawing in design phase and look for the reasonable method of work. Therefore, exact estimation for quantity and budgeting are very important processes, as a measure of judging the profitability of interior construction. These processes are mostly based on 2D drawing, so time and experienced staff are required. Error and omission can occur because the experienced staff also calculates the area using 2D based drawing. Interior market is currently based on 3D modeling from planning to final design. Accordingly, estimating quantity based on 3D modeling is emerging as a way of reducing error and omission. This paper will present the methodology on calculating area, the basic element of estimating quantity based on 3D Modeling in interior field.

• Transactions of Materials Processing
• /
• v.24 no.4
• /
• pp.234-240
• /
• 2015

Multi-pass shape drawing is very important to produce steel profiles in round samples. In the current study, a process design system is developed for a multi-pass shape drawing. In general, the number of passes for a multi-pass shape drawing is 2 to 3 when the reduction ratio, drawing stress, and productivity are considered. Therefore, calculating the drawing stress and designing the intermediated die shapes are very important. In order to calculate the drawing stress, a shape drawing load prediction method is proposed using a general axisymmetric drawing load prediction model. An intermediate die shape design method is proposed using the initial and the final product shapes. Based on this analysis, a process design system is developed for multi-pass shape drawing for steel profiles. The system works with AutoCAD. The system was applied to design a shape drawing of a spline.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1995.10a
• /
• pp.128-135
• /
• 1995

Theoretical and experimental drawing characteristics for the step drawbead are discussed. The drawbead restraining forces and strains by the varous drawing angles are measured experimentally. Also, during the blank holding process, the strain distributions of upper and lower skins of specimens are analysed by the 2-D rigid-plastic F.E.M And the drawbead restraining forces and strain distributions for the drawn specimens by the drawing length are obtained by experiment.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.8 no.12
• /
• pp.1933-1940
• /
• 2013

Recently, due to improvement of computer performance and development of information devices, technology of mobile augmented reality is proliferating rapidly. However, because most of contents are passive or limitary, user can not feel interest and immersion. This paper designs interaction user interface system of 2 dimensional drawing based on mobile augmented reality to make bi-directional communication between the real world and the virtual world possible by using the vision based augmented reality and the database system.

• International conference on construction engineering and project management
• /
• 2022.06a
• /
• pp.1253-1253
• /
• 2022

Although the construction industry is changing from a 2D-based to a 3D BIM-based management process, 2D drawings are still used as standards for permits and construction. For this reason, 2D deliverables extracted from 3D BIM are one of the essential achievements of BIM projects. However, due to technical and institutional problems that exist in practice, the process of extracting 2D deliverables from BIM requires additional work beyond generating 3D BIM models. In addition, the consistency of data between 3D BIM models and 2D deliverables is low, which is a major factor hindering work productivity in practice. To solve this problem, it is necessary to build BIM data that meets information requirements (IRs) for extracting 2D deliverables to minimize the amount of work of users and maximize the utilization of BIM data. However, despite this, the additional work that occurs in the BIM process for drawing creation is still a burden on BIM users. To solve this problem, the purpose of this study is to increase the productivity of the BIM process by automating the process of extracting 2D deliverables from BIM and securing data consistency between the BIM model and 2D deliverables. For this, an expert interview was conducted, and the requirements for automation of the process of extracting 2D deliverables from BIM were analyzed. Based on the requirements, the types of drawings and drawing expression elements that require automation of drawing generation in the design development stage were derived. Finally, the method for developing automation technology targeting elements that require automation was classified and analyzed, and the process for automatically extracting BIM-based 2D deliverables through templates and rule-based automation modules were derived. At this time, the automation module was developed as an add-on to Revit software, a representative BIM authoring tool, and 120 rule-based automation rulesets, and the combinations of these rulesets were used to automatically generate 2D deliverables from BIM. Through this, it was possible to automatically create about 80% of drawing expression elements, and it was possible to simplify the user's work process compared to the existing work. Through the automation process proposed in this study, it is expected that the productivity of extracting 2D deliverables from BIM will increase, thereby increasing the practical value of BIM utilization.

• The Journal of the Korea Contents Association
• /
• v.10 no.2
• /
• pp.130-137
• /
• 2010

Light Drawing is a photographic technique which exposures are made at night or in a darkened room usually by moving a hand-held light source[1]. Due to the limitations of equipment and environment, users having difficulty in drawing a picture in 3D space. If user take a light drawing, they need a camera that have function and darkened environment. Alternative solution is that we can make a light drawing picture by using the computer drawing tool as in Photoshop. Nevertheless, this solution will let the User lose their interest in drawing because this solution cannot synchronize between the real action of human hand motion and the electronic input devices such as mouse and keyboard. This paper proposed a digital content that can make light drawing easier. We used a digital content that will facility Light Drawing easier. We can measure the light spot position by using the stereo camera. Based on the measured position of the light spot, we reproduce light drawing in virtual space by using drawing effect method.

• Transactions of Materials Processing
• /
• v.5 no.2
• /
• pp.130-137
• /
• 1996

The sheet formability can be improved by the optimum drawbeads installation because draw-beads can control the flow of the metal into the die cavity when the punch enters into the die opening, In this study the drawing characteristics for step drawbead are analyzed by 2-D rigid -plastic FEM and also are measured experimentally. In addition for the validity of FEM theoretical results are compared with the experimental results. Especially the draw bead restrain-ing forces and the strain distributions of drawn specimens are obtained in both FEM and experiment. Also the effects of the drawbead dimensions drawing angles and blank holding forces on the drawing characteristics are investigated.