• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.431-431
• /
• 2011

Rio Narcea 는 스페인 북부에 위치한 Astuias 지역을 흐르는 Nalon River 의 한 지류로서 총연장 102km 유역 면적 1,135 m이며. 사행천으로 홍수 시 범람하기 쉬운 곡류천의 특성상 잦은 홍수피해를 받고 있는 지역이다. 특히 2010년 6월에는 일주일 사이에 홍수 피해가 두 번씩이나 발생함에 따라 수많은 인명피해가 발생하였고 사회 SOC 시설이 큰 타격을 입는 등 상당한 피해를 야기하였다. 이에 1D 및 2D 수리 모델링 프로그램을 이용하여 사행천에 수리특성을 분석하고, 그에 따른 홍수범람도를 작성하여 1D와 2D 모델링을 비교분석하였고 이를 이용하여 홍수 피해 방지 대책을 마련하는데 도움이 되고자 한다. 1D 모델링은 HEC-GeoRAS 및 HEC-RAS를 이용하였으며, 2D 모델링에는 IBER를 이용하였다. Arc-GIS 툴을 이용한 HEC-GeoRAS 기능을 사용하여 강의 단면을 구성하고 HEC-RAS를 이용하여 1차원 모델링을 수행하였으며, 2D 모델링에는 스페인의 CIMNE에서 개발한 2차원 수리해석 프로그램인 IBER를 사용하였는데, 이 프로그램은 부정류 해석과 난류 해석, 유사이동 및 Dam-break 등의 해석이 가능하다. 1D 및 2D 모델링의 결과 값으로 얻어진 수심 및 유속을 토대로 1D는 Arc-GIS를 이용, 2D는 IBER 프로그램 내에 기능을 이용하여 바르셀로나에서 주로 사용되는 Catalan Water Agency 기준에 의한 홍수범람도를 작성하였다. 각각의 1D 와 2D 모델링으로 작성한 홍수범람도를 비교분석해 본 결과 거의 유사하게 표현됨을 알 수 있었으며, 두 모델링 기법 모두 홈수범람도를 표현함에 있어서 유용하게 사용될 수 있을 것이라 생각된다. 대상지역의 관련 자료의 유무에 따라 구분하여 1D 혹은 2D 모델링 기법을 선택 사용할 수 있으며. 유역의 홍수발생시 인명과 재산 피해에 대비한 홍수범람 지도 및 홍수재해지도 제작에 도움이 될 것으로 판단된다.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.3
• /
• pp.129-135
• /
• 2011

In this paper, we propose the algorithm using optical flow and machine learning-based segmentation for the 3D conversion of 2D video. For the segmentation allowing the successful 3D conversion, we design a new energy function, where color/texture features are included through machine learning method and the optical flow is also introduced in order to focus on the regions with the motion. The depth map are then calculated according to the optical flow of segmented regions, and left/right images for the 3D conversion are produced. Experiment on various video shows that the proposed method yields the reliable segmentation result and depth map for the 3D conversion of 2D video.

• Computers and Concrete
• /
• v.18 no.3
• /
• pp.319-336
• /
• 2016

In this study, both two- and three-dimensional (2D and 3D) finite-volume-based models were developed to analyze the heat transfer mechanisms through the porous structures of cellular concretes under steady-state heat transfer conditions and to investigate the differences between the 2D and 3D modeling results. The 2D and 3D reconstructed pore networks were generated from the microstructural information measured by 3D images captured by X-ray computerized tomography (X-CT). The computed effective thermal conductivities based on the 2D and 3D calculations performed on the reconstructed porous structures were found to be nearly identical to those evaluated from the 2D cross-sectional images and the 3D X-CT images, respectively. In addition, the 3D computed effective thermal conductivity was found to agree better with the measured values, in comparison with the 2D reconstruction and real cross-sectional images. Finally, the thermal conductivities computed for different reconstructed porous 3D structures of cellular concretes were compared with those obtained from 2D computations performed on 2D reconstructed structures. This comparison revealed the differences between 2D and 3D image-based modeling. A correlation was thus derived between the results of the 3D and 2D models.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.12
• /
• pp.1261-1266
• /
• 2014

Smart shipyard, all of the business of shipyard by using a mobile application, and the rapid spread of smart equipment, the overload of infrastructure due to a variety of mobile services is expected. Because macrocell and femtecell to reduce the overloading of existing infrastructure, additional core network devices have a problem, in this paper, the efficiency of resources than the communication over the existing infrastructure smart shipyard network to improve, to apply the D2D communication technology that can reduce the load on the infrastructure. The proposed routing path plan in accordance with the transfer method and the traffic type of network configuration and D2D equipment navigation and data for applying a smart shipyard. Whether to execute the function to overload traffic in the core network can send to the optimized path was confirmed by using the state transition diagram. Smart shipyard, by applying D2D communication allow efficient traffic handling than conventional communication method.

• Journal of Digital Convergence
• /
• v.12 no.12
• /
• pp.553-560
• /
• 2014

In this paper, we propose a method to convert 2D image to 3D anaglyph using quadratic & cubic B$\acute{e}$zier Curves in HTML5. In order to convert 2D image to 3D anaglyph image, we filter the original image to extract the RGB color values and create two images for the left and right eyes. Users are to set up the depth values of the image through the control point using the quadratic and cubic B$\acute{e}$zier curves. We have processed the depth values of 2D image based on this control point to create the 3D image conversion reflecting the value of the control point which the users select. All of this work has been designed and implemented in Web environment in HTML5. So we have made it for anyone who wants to create their 3D images and it is very easy and convenient to use.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.1
• /
• pp.32-42
• /
• 2015

In this paper, we considered the scenario that one cellular link and muti-D2D links share the same frequency resource which can improve the spectrum efficiency during uplink communication in LTE (Long Term Evolution)-Advanced network. In order to reduce the interference caused to the D2D users, we set DME (Discovery and Management Entity) which can send the area information to eNB(evolved Node B). We proposed a resource allocation scheme by using these assistant devices to reduce the interference that CUE (Cellular User Equipment) causes to DUE Rx (D2D UE Receiver). Basing on the area information, in order to mitigate the interference among the D2D pairs which share the same frequency resource, a power control scheme has been proposed. The simulation results prove that by using the DMEs, the proposed schemes improve the stability of D2D communication and bring the highest performance of the communication system when comparing to the other different schemes.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38A no.4
• /
• pp.371-380
• /
• 2013

D2D (Device-to-Device) communication on an underlying cellular infrastructure which exploits the same spectrum has several advantages such as increased resource utilization and improved cellular coverage. However, D2D communication system needs to cope with ICI (Inter-Cell Interference) and interference between cellular and D2D links. As a result, macro UEs (User Equipments), especially those located near cell edge, will suffer from serious link performance degradation. We propose a novel interference avoidance mechanism assisted by SRN (Shared Relay Node) in this paper. SRN not only performs data re-transmission as a usual Type II relay but also has several features newly defined to avoid interference between cellular and D2D links. In particular, we suggest resource allocation methods based on the SRN for effective interference avoidance, and evaluate their performance through computer simulations.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.10
• /
• pp.2403-2408
• /
• 2014

We designate multiple target areas for the advertisement disseminations in order to resolve the problem of advertisement transmission efficiency degradation due to overlapped device-to-device (D2D) transmissions and unnecessary advertisement transmissions. We here propose an efficient advertisement dissemination algorithm based on pre-selected target areas considering user density. In our proposed algorithm, relay nodes are gradually selected according to the locations of the target areas. We mathematically analyze D2D advertisement coverages of our proposed algorithm, and compare the various simulation results of the proposed algorithm with those of the conventional algorithm according to the several simulation scenarios via intensive simulations.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.1
• /
• pp.91-107
• /
• 2014

Device-to-device (D2D) communication is an excellent technology to improve the system capacity by sharing the spectrum resources of cellular networks. Multicast service is considered as an effective transmission mode for the future mobile social contact services. Therefore, multicast based on D2D technology can exactly improve the spectrum resource efficiency. How to apply D2D technology to support multicast service is a new issue. In this paper, a resource allocation scheme based on cognitive radio (CR) for D2D underlay multicast communication (CR-DUM) is proposed to improve system performance. In the cognitive cellular system, the D2D users as secondary users employing multicast service form a group and reuse the cellular resources to accomplish a multicast transmission. The proposed scheme includes two steps. First, a channel allocation rule aiming to reduce the interference from cellular networks to receivers in D2D multicast group is proposed. Next, to maximize the total system throughput under the condition of interference and noise impairment, we formulate an optimal transmission power allocation jointly for the cellular and D2D multicast communications. Based on the channel allocation, optimal power solution is in a closed form and achieved by searching from a finite set and the interference between cellular and D2D multicast communication is coordinated. The simulation results show that the proposed method can not only ensure the quality of services (QoS), but also improve the system throughput.

• KIPS Transactions on Computer and Communication Systems
• /
• v.3 no.12
• /
• pp.455-462
• /
• 2014

In recent years, various services in mobile environments due to the growth of mobile devices and related techniques like wireless networks. Furthermore, as the increasing communication traffic in cellular networks has become a new significant issue, many studies for device-to-device(D2D) communication and D2D-based cooperative services have been performed recently. In this paper, we design a smart agent system for D2D-based cooperative services and propose a dynamic service binding method based on service ontology. We classify roles of mobile devices for cooperative services by defining three types of smart agents, and construct a knowledge base in order to describe properties of 'service' unit. The proposed knowledge model, D2D cooperative service ontology, can enable a autonomous cooperative services between mobile devices by binding a requested service to the appropriate member device according to the real-time context in mobile environments.