• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.198-202
• /
• 2001

In this study, contour vibration mode piezoelectric transformer with size of 27.5${\times}$27.5${\times}$2.6mm$^3$ using PNW-PMN-PZT ceramic was fabricated. And the piezoelectric transformer was adopted to fluorescent lamp ballast circuit. Electrical characteristics of the piezoelectric transformer were investigated for fluorescent lamp ballast application. The electrical properties and characteristic temperature rise were measured using oscilloscope and infrared temperature sensor. A 28W fluorescent lamp was successfully driven by the fabricated ballast circuit. After driving the lamp using ballast circuit for 24 min, the output power, efficiency and characteristic temperature rise of piezoelectric transformer showed the appropriate values of 28.85[W], 86.3[%] and 15[$^{\circ}C$], respectively.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.847-851
• /
• 2000

In this study, contour-vibration-mode Pb($Ni_{1/2}$,$W_{1/2}$)$O_3$-Pb(Zr,Ti)$O_3$ piezoelectric transformers for driving a 28W(T5) fluorescent lamp were fabricated to the modified filter structure with ring and dot electrodes which has been developed for application in 455kHz AM radios. The piezoelectric transformers were fabricated to the size of $31.5$\times$31.5$\times$2.5$mm^3$ with the variations of ring/dot electrode area ratio. Driving of piezoelectric transformer was carried out with input region for the ring electrode and output region for the dot electrode. The electrical properties and characteristic temperature rises caused by the vibration were measured at various load resistances. A 28 W fluorescent lamp, T5, was successfully driven by the fabricated transformer. The transformer with ring/dot electrode area ratio of 1.83 exhibited the best properties in terms of output power, efficiency and characteristic temperature rise, 30.95 W, 97.57% and8.3$^{\circ}C$ respectively.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 춘계학술대회 논문집 유기절연재료 전자세라믹 방전플라즈마 연구회
• /
• pp.135-139
• /
• 2001

Contour vibration mode piezoelectric transformers were designed and fabricated to the square plate with size of $27.5{\times}27.5{\times}2.5(2.6,\;3.0)mm^3$ using PNW-PMN-PZT ceramics. Electrical characteristics of the piezoelectric transformer were investigated for fluorescent lamp ballast application. The electrical properties and characteristic temperature rise were measured using oscilloscope and infrared temperature sensor. A 28W fluorescent lamp was successfully driven by the fabricated transformers. After driving the lamp using Power Amplifier for 24 min, the output power, efficiency and characteristic temperature rise of PT2 piezoelectric transformer showed the appropriate values of 28.01 W, 99.43% and $11^{\circ}C$, respectively. The electronic ballast using PT2 piezoelectric transformer showed an excellent output power of 28.85 W and efficiency of 86.3%, respetively.

• 한국전기전자재료학회논문지
• /
• 제14권9호
• /
• pp.736-743
• /
• 2001

Contour vibration mode piezoelectric transformers were designed and fabricated to the square plate with size of 27.5x27.5x2.6㎟ using PNW-PMN-PZT ceramics. Electrical characteristics of the piezoelectric transformer were investigated for fluorescent lap ballast application. The electrical properties and characteristic temperature rise were measured by oscilloscope and infrared temperature sensor. A 28W fluorescent lamp was successfully driven by the fabricated transformers. The electronic ballast using piezoelectric transformer showed an excellent output power of 28.85[W], efficiency of 86.3% and characteristic temperature rise of 15[$\^{C}$].

• 조명전기설비학회논문지
• /
• 제28권3호
• /
• pp.91-96
• /
• 2014

Modern electronic circuits are becoming more vulnerable to damage by surges, and it is required to improve the impulse withstand voltage performance of electrical and electronic equipment. This paper presents the impulse withstand voltage performance of lighting equipment connected to power lines, and the impulse withstand voltage tests for fluorescent lamp, LED lamp and halogen lamp were carried out according to the reference standards under normal service conditions. To conduct performance tests against lightning surge, a combination wave ($1.2/50{\mu}s$ voltage - $8/20{\mu}s$ current) was employed. The test surge was applied between lines or between line and ground of the specimen to be measured. The test surge was applied synchronized at the peak value of the positive and negative AC voltage waves. As a consequence, some specimens satisfied the impulse withstand voltage test criteria, but lighting equipment such as 36W fluorescent lamps, 5W and 5.5W LED lamps and 50W halogen lamp were damaged at the test voltage levels between power lines. It is needed to improve the qualities of lighting equipment to satisfy EMC immunity requirements of equipment for general lighting purposes.

• 전력전자학회논문지
• /
• 제8권1호
• /
• pp.70-79
• /
• 2003

본 연구에서는 압전 변압기를 이용한 T5 28급 전자식 안정기를 제작하여 그에 관한 특성을 조사하였다. 제작된 전자식 안정기는 크게 정류부와 능동형 역률 개선 회로부, 마이크로 컨트롤러를 이용한 주파수 발진부와 피드백 제어 회로부, 그리고 하프-브리지 인버터 회로 및 압전 변압기포 구성하였다. 사용된 원칩 마이크로 컨트롤러(AT90S4433)는 주파수를 발진하는 발진 회로부와 형광램프에 인가된 전류값을 측정하여 램프의 구동여부를 판단하는 피드백 제어 회로부로 구성하였으며, 내부 프로그램에 의해 일정 주파수에서 주파수를 감소시킴으로서 램프 방전을 유도하고 방전을 확인 후 정상상태 구동을 하는 주파수 대포의 이동을 통해 형광램프에 일정한 출력을 유지하였다. 결과적으로 개발된 전자식 안정기는 기존의 자기식 안정기가 무겁고 부피가 크며 많은 손실과 깜박거림(Flicker)현상을 지니는 반면에, 75[kHz]대의 고주파수로 동작하면서 99.5[%]이상의 높은 역률과 12[%]이하의 낮은 총 고조파 왜곡률(THD), 그리고 1.5이하의 CF(Crest Factor)를 나타낸다. 따라서 본 연구에서 제작된 압전형 안정기근 기존의 안정기를 대체할 수 있으며, 소형 경량화 되고 높은 효율을 지니게 되므로 경제적 측면에서의 장점도 기대된다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2002년도 전력전자학술대회 논문집
• /
• pp.228-232
• /
• 2002

In this paper, In order to solve the problem is proposed using a new type of electronic ballast that the traditional magnetic ballasts operated at 50-60Hz have been suffered from noticeable flicker, high loss, large crest factor and heavy weight which is composed of rectifier, active power corrector, series resonant half bridge inverter, micro-controller and piezoelectric transformer for driving for driving T5 fluorescent lamp were manufactured. The proposed electronic ballast operated at high frequency (about 75kHz) shows a input power factor of more than 0.995, total harmonic distortion of less than $12\%$ and lamp current crest factor of less than 1.5, respectively. Output power and efficiency showed 28w and $85\%$, respectively. Accordingly, it is considered that the ballast using piezoelectric transformer can replace the typical electronic ballast.

• 조명전기설비학회논문지
• /
• 제15권1호
• /
• pp.28-35
• /
• 2001

이 논문에서는 형광램프를 광고판에 사용할 수 있도록 하기 위해 형광램프의 점멸 및 가변색 동작으로 제어할 수 있는 전자식 스타터와 제어장치를 개발하였다. 개발된 전자식 스타터는 제어장치의 점등신호에 따라 20∼40[W] 형광램프를 일반 점등시키며, 최소 0.2[s] 동안의 점멸 동작에서도 램프 수명을 3,000시간 이상 보장할 수 있다. 또한 마이크로컨트롤러로 구성된 제어장치는 최대 128개의 형광램프가 제어가능하고, 10가지 이상의 점멸모드와 3개의 RGB 형광램프를 이용하여 7가지 광색을 표현할 수 있는 가변색 모드가 가능하다.

• Environmental Engineering Research
• /
• 제18권1호
• /
• pp.21-28
• /
• 2013

In this study, the applicability of visible light-emitting-diodes (LEDs) to the photocatalytic degradation of indoor-level trichloroethylene (TCE) and perchloroethylene (PCE) over N-doped $TiO_2$ (N-$TiO_2$) was examined under a range of operational conditions. The N-$TiO_2$ photocatalyst was calcined at $650^{\circ}C$ (labeled N-650) showed the lowest degradation efficiencies for TCE and PCE, while the N-$TiO_2$ photocatalysts calcined at $350^{\circ}C$, $450^{\circ}C$, and $550^{\circ}C$ (labeled as N-350, N-450, and N-550, respectively) exhibited similar or slightly different degradation efficiencies to those of TCE and PCE. These results were supported by the X-ray diffraction patterns of N-350, N-450, N-550, and N-650. The respective average degradation efficiencies for TCE and PCE were 96% and 77% for the 8-W lamp/N-$TiO_2$ system, 32% and 20% for the violet LED/N-$TiO_2$ system, and ~0% and 4% for the blue LED/N-$TiO_2$ system. However, the normalized photocatalytic degradation efficiencies for TCE and PCE for the violet LED-irradiated N-$TiO_2$ system were higher than those from the 8-W fluorescent daylight lamp-irradiated N-$TiO_2$ system. Although the difference was not substantial, the degradation efficiencies exhibited a decreasing trend with increasing input concentrations. The degradation efficiencies for TCE and PCE decreased with increasing air flow rates. In general, the degradation efficiencies for both target compounds decreased as relative humidity increased. Consequently, it was indicated that violet LEDs can be utilized as energy-efficient light sources for the photocatalytic degradation of TCE and PCE, if operational conditions of N-$TiO_2$ photocatalytic system are optimized.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 추계학술대회 논문집 Vol.16
• /
• pp.451-455
• /
• 2003

최근 LCD제품은 고유한 특장인 경박단소가 요구되면서, 기존의 Back Light Unit(BLU) 로는 대응할 수 없는 사양으로 진화되고 있다. 기존과 동일한 설계개념으로 접근시에 시장에서 요구되는 중량, 두께, 휘도의 사양을 만족시킬 수 없으며, BLU의 주요광원인 CCFL(Cold Cathod Fluorescent Lamp)의 휘도 개선 또 한 한계에 다다르고 있다. 따라서 앞으로의 BLU 의 고성능화는 최적화, 고효율화로의 개발 전개가 예상되며, LCD의 고해상도에 따른 투과율 저하를 보상하기 위한 고품질 BLU의 개발이 시급한 상황이다. 본 연구에서는 이러한 BLU의 고효율화, 고품질화를 달성하기 위한 고성능 도광판 개발과 관련하여, 실물 제작에 앞서 광학시뮬레이션을 통한 이론적 접근을 수행하였다. 연구 결과, 상측에서 정각 $90^{\circ}$ 에 높이 $50{\mu}m$ 하측에서 정각 $80^{\circ}$ 높이 $28{\mu}m$일때 평균조도가 71.52W/m^2 구현됨을 알 수 있다. 이 결과를 바탕으로 통상의 인쇄 방식 도광판에 비해서 약 20% 정도의 휘도향상이 가능함을 알 수 있었다. 또한 차후 본 결과를 바탕으로 한 실물 제작을 통해 설계 시뮬레이션 결과와의 비교를 통해서 정확한 예측이 가능한 시스템을 구현함을 목적으로 하였다.