• 제목/요약/키워드: 211 precursor

검색결과 24건 처리시간 0.019초

초음파 분무법으로 제조한 $(Y,Gd)BO_3:Eu^{3+}$ 형광체의 발광특성에 관한 연구 (A Study on Photoluminance Properties of $(Y,Gd)BO_3:Eu^{3+}$ Phosphor Synthesized by Ultrasonic Spray Pyrolysis)

  • 김대수;이임렬
    • 한국재료학회지
    • /
    • 제10권3호
    • /
    • pp.204-211
    • /
    • 2000
  • 초음파 분무법으로 $(Y,Gd)BO_3:Eu$의 PDP 적색 형광체를 제조하여 147nm VUV 여기에 따른 발광 특성을 분석하였다. 초음파 분무에 사용된 전구체 용액은 Y, Gd, Eu의 아세트산염과 $H_3BO_3$를 증류수에 용해하여 1.7MHz의 초음파 분무기로 고온의 반응관내로 분무하였다. 분무된 액적은 반응관내에서 통과시 불충분한 반응으로 C-C와 C-H를 함유한 비정질 상이었으나, $1100^{\circ}C$에서 추가 열처리 한 시편은 고상반응법으로 제조한 형광체와 동일한 결정구조와 성분을 보였다. 고상반응법으로 제조한 형광체의 분말 크기는 $3{\mu\textrm{m}}$으로 조대하고 불균일한 분포를 보인 반면, $500^{\circ}C$에서 분무한 후 $900^{\circ}C$에서 열처리하여 제조한 $(Y_{0.7}Gd_{0.3})_{0.95}BO_3:Eu_{0.05}\;^{3+}$ 형광체의 모양은 비교적 구형이었으며 평균 입자크기는 $0.7{\mu\textrm{m}}$로 미세하고 균일한 분포를 하고 있었다. 147nm VUV 여기시 초음파 분무로 제조한 $(Y_{0.7}Gd_{0.3})_{0.95}BO_3:Eu_{0.05}\;^{3+}$ 형광체의 적색 발광강도는 고상반응법으로 제조한 시편이나 상용품인 $(Y,Gd)BO_3:Eu$ 형광체에 비해 그 휘도가 증가되었다.

  • PDF

Follicular fluid cerebellin and betatrophin regulate the metabolic functions of growing follicles in polycystic ovary syndrome

  • Ersahin, Aynur Adeviye;Acet, Mustafa;Ersahin, Suat Suphan;Acet, Tuba;Yardim, Meltem;Kenanoglu, Omer;Aydin, Suleyman
    • Clinical and Experimental Reproductive Medicine
    • /
    • 제44권1호
    • /
    • pp.33-39
    • /
    • 2017
  • Objective: The aim of this study was to assess the changes of follicular fluid (FF) and serum levels of cerebellin precursor protein 1 (cbln1) and betatrophin in patients with polycystic ovary syndrome (PCOS) undergoing in vitro fertilization/intracytoplasmic sperm injection (IVF/ICSI) with a gonadotropin-releasing hormone (GnRH) antagonist protocol. Methods: Twenty infertile women with PCOS and 20 control women diagnosed as poor responders undergoing ovarian stimulation with a GnRH antagonist were included. Blood samples were obtained during ovum pick-up. Follicular fluid from a dominant follicle was collected from the subjects. Using enzyme-linked immunosorbent assays, FF and serum levels of cbln1 and betatrophin were measured in both groups of participants. Metabolic and hormonal parameters were also determined and correlated with each other. Results: Both groups of women had similar serum and FF betatrophin levels ($55.0{\pm}8.9ng/mL$ vs. $53.1{\pm}10.3ng/mL$, p=0.11). The serum and FF betatrophin levels of poor responders were found to be similar ($49.9{\pm}5.9ng/mL$ vs. $48.9{\pm}10.7ng/mL$, p=0.22). Conversely, the FF cbln1 levels of PCOS women were found to be significantly higher than the serum cbln1 levels ($589.1{\pm}147.6ng/L$ vs. $531.7{\pm}74.3ng/L$, p<0.02). The FF cbln1 levels of control participants without PCOS were significantly higher than their serum cbln1 levels ($599.3{\pm}211.5ng/L$ vs. $525.3{\pm}87.0ng/L$, p=0.01). Positive correlations were detected among body mass index, insulin resistance, serum insulin, total testosterone, and betatrophin levels in the PCOS group. Conclusion: Follicular fluid betatrophin and cbln1 concentrations may play a pivotal role on follicular growth in PCOS subjects undergoing IVF/ICSI with an antagonist protocol.

$TiO_2$ Thin Film Patterning on Modified Silicon Surfaces by MOCVD and Microcontact Printing Method

  • 강병창;이종현;정덕영;이순보;부진효
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2000년도 제18회 학술발표회 논문개요집
    • /
    • pp.77-77
    • /
    • 2000
  • Titanium oxide (TiO2) thin films have valuable properties such as a high refractive index, excellent transmittance in the visible and near-IR frequency, and high chemical stability. Therefore it is extensively used in anti-reflection coating, sensor, and photocatalysis as electrical and optical applications. Specially, TiO2 have a high dielectric constant of 180 along the c axis and 90 along the a axis, so it is highlighted in fabricating dielectric capacitors in micro electronic devices. A variety of methods have been used to produce patterned self-assembled monolayers (SAMs), including microcontact printing ($\mu$CP), UV-photolithotgraphy, e-beam lithography, scanned-probe based micro-machining, and atom-lithography. Above all, thin film fabrication on $\mu$CP modified surface is a potentially low-cost, high-throughput method, because it does not require expensive photolithographic equipment, and it produce micrometer scale patterns in thin film materials. The patterned SAMs were used as thin resists, to transfer patterns onto thin films either by chemical etching or by selective deposition. In this study, we deposited TiO2 thin films on Si (1000 substrateds using titanium (IV) isopropoxide ([Ti(O(C3H7)4)] ; TIP as a single molecular precursor at deposition temperature in the range of 300-$700^{\circ}C$ without any carrier and bubbler gas. Crack-free, highly oriented TiO2 polycrystalline thin films with anatase phase and stoichimetric ratio of Ti and O were successfully deposited on Si(100) at temperature as low as 50$0^{\circ}C$. XRD and TED data showed that below 50$0^{\circ}C$, the TiO2 thin films were dominantly grown on Si(100) surfaces in the [211] direction, whereas with increasing the deposition temperature to $700^{\circ}C$, the main films growth direction was changed to be [200]. Two distinct growth behaviors were observed from the Arhenius plots. In addition to deposition of THe TiO2 thin films on Si(100) substrates, patterning of TiO2 thin films was also performed at grown temperature in the range of 300-50$0^{\circ}C$ by MOCVD onto the Si(100) substrates of which surface was modified by organic thin film template. The organic thin film of SAm is obtained by the $\mu$CP method. Alpha-step profile and optical microscope images showed that the boundaries between SAMs areas and selectively deposited TiO2 thin film areas are very definite and sharp. Capacitance - Voltage measurements made on TiO2 films gave a dielectric constant of 29, suggesting a possibility of electronic material applications.

  • PDF

흰독말풀(Datura metel L.)종양 캘러스의 현탁배양으로부터 Scopolamine 생성 (Scopolamine Production in Suspension Cultures of Tumor Calli from Datura metel L.)

  • 이수경;윤길영;김용해;양덕조
    • 식물조직배양학회지
    • /
    • 제27권3호
    • /
    • pp.203-211
    • /
    • 2000
  • 흰독말풀의 tumor조직에서 유도한 tumor callus로부터 scopolamine의 생산을 극대화하기 위한 연구를 수행하였다. Tumor callus의 생장률을 증가시키기 위해서는 초기접종량을 배지의 2%로 하고 배양기간은 4주가 효과적이다. 그래서 만일 이단계배양을 추진하려면 배지교체의 시기는 3주가 가장 적당한 것으로 확인되었다. Scopolamine의 생성을 위한 광의 효과를 알아본 결과, 암상태보다 광상태가 callus생장 및 scopolamine 함량 증가에 효과적이었다. Scopolamine 함량 증가의 최적 광량은 16$\mu$mo1 m$^{-2}$ s$^{-1}$, 광질은 적색파장 그리고 연속광보다 장일조건 (16/8)의 광주기에서 tropane alkaoid인 scopolamine합성이 현저히 촉진되었다. 질소원으로는 산화형 질소인 NO$_{3}$$^{-}$ 를 4 g/L로 증가시키는 것이 가장 효과적인 것으로 확인되었다. Scopolamine의 함량을 증가시키기 위한 elicitor 공급은 10 mg/L chitosan과 15 mg/L yeast추출물이 가장 효과적이었으며, 전구물질로는 0.2 mM tropine과 0.3 mM tropic acid가 가장 우수한 것으로 확인되었다. 이러한 결과를 종합해 보면, 흰독말풀 tumor callus에서 scopolamine 대량생산을 추진할 경우 3주 동안 광상태와 무기이온 조성을 균형 있게 조절하여 생장을 최대로 증가시킨 후, 1주 동안 scopolamine생산을 위해 elicitor, precursors 등이 조합된 배지에서 biotransformation 시키는 것이 가장 효과적일 것으로 판단된다. 또한 tumor callus에 $^{60}$Co${\gamma}$-ray을 조사하여 3K, 4K및 6k tumorcallus를 확보하였으며, 이들로부터 유도한 teratoma는 형태적 변이를 나타내었다. Teratoma로부터 또 다시 새로운 teratoma-callus 세포주를 유도하여 현탁배양을 수행하였던 바, MS 기본 배지에서 1.0 mg/L 2.4-D과 0.5 mg/L kinetin을 조합하여 처리한 callus 의 액체배양에서 cell aggregation이 일어나지 않고 세포가 유리화 되면서 왕성한 생장을 보였다.

  • PDF