• Fashion & Textile Research Journal
• /
• v.15 no.2
• /
• pp.231-239
• /
• 2013

This research developed a smart girdle for adult women in their 20's that has an inserted carbon weaving heater to help with relief from coldness and abdominal disease through the thermal insulation effect. A pocket of powernet fabric was attached to the inside of the girdle for the easy insertion and separation of the heating device, while the heating device was fixed to a mesh material by cotton yarn and was wrapped with elastic lining material to prevent the mechanical devices from being exposed. A set of 3 hooks was attached to the center of the back of the heating device in consideration of convenience and mobility. Whereas the switch was inserted into around the right waistband, and the battery into the inner pocket around the waist, to integrate the heating device with the girdle. The satisfaction and usability of the fabricated smart girdle was verified by having research participants wear it to evaluate the appearance change caused by the device, the inconvenience of wearing/unwearing, mobility, and the satisfactory functionality of the device. As a result, the grand mean was evaluated to be high, with appearance (4.19), mobility (4.17), and functionality (4.51) being higher than 4.00; which indicates that the heat generation function of the smart girdle is effective. It may be said that such collection and analysis of data that reflect users' opinions have value and significance in that they can be grafted onto future research on new technology as well as they contribute to taking a step forward in the rapidly increasing research of smart clothing, with the new-type clothing equipped with new function.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.7 no.1
• /
• pp.20-25
• /
• 2014

There are several severe problems for LED device, the next generation's economy green lighting: as the temperature increases, the lamp efficiency decreases; if the temperature is over $80^{\circ}C$, the lifetime of lighting decreases; Red Shift phenomenon that wavelength of spectrum line moves toward long wavelength occurs; and optical power decreases as $T_j$ increases. Thus, Heat sink design that can minimize the heat of LED device is currently in progress. While the thermal resistance of COB Type LED was reduced by direct coupling of LED chip to the board, residential 13.5W requires Heat sink in order resolve heat issue. This study designed Heat Sink suitable for residential 13.5W COB LED down-light and selected the optimum Fin thickness through flow simulation that packaged the designed Heat Sink and 13.5W COB. And finally it analyzed and evaluated the thermal modes using contacting thermometer.

• Journal of Information Processing Systems
• /
• v.6 no.1
• /
• pp.1-20
• /
• 2010

Due to the convergence of voice, data, and video, today's telecom operators are facing the complexity of service and network management to offer differentiated value-added services that meet customer expectations. Without the operations support of well-developed Business Support System/Operations Support System (BSS/OSS), it is difficult to timely and effectively provide competitive services upon customer request. In this paper, a suite of NGOSS-based Telecom OSS (TOSS) is developed for the support of fulfillment and assurance operations of telecom services and IT services. Four OSS groups, TOSS-P (intelligent service provisioning), TOSS-N (integrated large-scale network management), TOSS-T (trouble handling and resolution), and TOSS-Q (end-to-end service quality management), are organized and integrated following the standard telecom operation processes (i.e., eTOM). We use IPTV and IP-VPN operation scenarios to show how these OSS groups co-work to support daily business operations with the benefits of cost reduction and revenue acceleration.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.57 no.3
• /
• pp.227-238
• /
• 2024

This study aimed to evaluate the effects of polyethylene microplastic (PE-MPs) via measuring the growth performance, hematological parameters, and antioxidant responses in Korean rockfish Sebastes schlegelii exposed to waterborne polyethylene microplastic with dimensions of 22-71 ㎛. S. schlegelii (mean weight, 34.55±5.82 g; mean length, 12.59±0.79 cm) were exposed to PE-MPs at concentrations of 0, 400, 800, 1,600 and 3,200 ㎍/L for 10 and 20 days. PE-MPs significantly affected growth performance, hematological parameters, plasma components, and antioxidant responses in a concentration-dependent manner. At a concentration ≥1,600 ㎍/L, PE-MPs significantly decreased body weight gain and specific growth rate, and significantly increased the hepatosomatic index. Hematological parameters showed a significant decrease in total red blood cell count and hemoglobin levels. Plasma components showed a significant increase in glucose, aspartate aminotransferase, and alanine transaminase levels, whereas total protein, calcium, and magnesium levels significantly decreased. Exposure to ≥1,600 ㎍/L PE-MPs also induced reactive oxygen species generation in the gill and liver, significantly increasing superoxide dismutase and catalase activity. These findings suggest that exposure to ≥1,600 ㎍/L PE-MPs could significantly change growth performance, hematological parameters, plasma components, and antioxidant responses, resulting in physiological toxicity.

• Microbiology and Biotechnology Letters
• /
• v.39 no.4
• /
• pp.382-386
• /
• 2011

Microbial fuel cells (MFC), devices that use bacteria as a catalyst to generate electricity, can utilize a variety of organic wastes as electron donors. The current generated may differ depending on the organic matter concentrations used, when other conditions, such as oxidant supply, proton transfer, internal resistance and so on, are not limiting factors. In these studies, a single-cathode type MFC (SCMFC) and dual-cathode type MFC (DCMFC) were used to ascertain the current's improvement through an increase in the contact area between the anode and the cathode compartments, because the cathode reaction is one of the most serious limiting factors in an MFC. Also an MFC was conducted to explore whether an improvement in electricity generation resulted from oxidizing the carbon sources and nitrates. About 250 mg $L^{-1}$ sodium acetate was fed to an anode compartment with a flow rate of 0.326 mL $min^{-1}$ by continuous mode. The current generated from the DCMFC was higher than the value produced from MFC with a single cathode. COD removal of dual-cathode MFC was also higher than that of single-cathode MFC. The nitrate didn't affect current generation at 2 mM, but when 4 and 8 mM nitrate was supplied, the current in the single-cathode and dual-cathode MFC was decreased by 98% from $5.97{\pm}0.13$ to $0.23{\pm}0.03$ mA and $8.40{\pm}0.23$ to $0.20{\pm}0.01$ mA, respectively. These results demonstrate that increasing of contact area of the anode and cathode can raise current generation by an improvement in the cathode reaction.

• Korea journal of population studies
• /
• v.16 no.2
• /
• pp.1-23
• /
• 1993

Korea fertility level has dropped since the 1960's and speed of decline has accelerated in the 1980's. In the resuls, the growth rate reached to less then 1 percent in 1990 and will be $\ulcorner$0 $\lrcorner$ percent growth in 2021. The total population will increase to 50, 586 thousand persons in 2021 then will decrease. With the rapid fertility decline the age structure of Korean population has changed : while the proportion of child population aged 0-14 is decreasing sharply, that of old-age population aged 65 and over is increasing. Because of the recent increase of sex ratio at birth, the sex structure among the young generation has been destorted; the sex ratio at age 0-4 was as high as high as 112.0 in 1990. The effects of these population phenomena on Korean society are the followings: 1) Old age dependency ratio is increasing rapidly and continuously and will be about 40.0 from the 2050's. 2) Because of the rapid decline of the number of births, the absolute number of the major labour force at age 25-34 will decrease after around 2000 and then from the 2010's become less than that in 1990. 3) Since the large fertility defferentials by womens's educational level have continued and the relation between the educational levels of mothers and children are very strong, level has dropped among higher educated women first when the average fertility level has declined in Korea, the average educational level of the children is may be expected to be relatively low and then the future productivity is will be also low, which causes the decline of 'quality of population. 4) When the high sex ratio at birth (over 110 since 1986) continues, number of brides will be short by over 20 percent from the 2010s, which will bring various kinds of social prblems. Therefore, the counter measures in concrete to relieve the heavy problems are recommended as follows: 1) The extention of the birth intervals, which helps to drop the population growth rate at the same level of number of children per women. 2) The positive supports for out-migrants, which helps to reduce the population size without any destortion of age-sex structure. 3) The defferent supports of family planning for the higher and lower classes, which helps to reduce the gaps between different ferility levels of the classes and to keep and improve the quality of population. 4)population education for both students and adults, which helps to minimize the gap between the private and public requirements.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.19 no.3
• /
• pp.44-50
• /
• 2005

This paper deals with the characteristics and reduction methods of the plasma luminosity caused between the ZnO surge arrester block and metal electrodes. In this study, the impulse current generator that can generate $8/20[{\mu}s]$ impulse currents with a peak short-circuit of 10[kA] is designed and fabricated. Plasma luminosity phenomena for fine and used ZnO blocks were observed as a function of the contact states between the ZnO block and electrodes and the polarity of applied impulse voltages. As a result, discharge luminous events are produced near the contact edges between the ZnO block and metal electrodes. The discharge plasma luminosity between the ZnO surge arrester block and low potential electrode is more intensive than that between the ZnO surge arrester block and high potential electrode. Surface flashover of ZnO blocks are mainly caused by plasma generation near the edge of metal electrode. Also, plasma luminosity for the fine ZnO blocks is less than that for the used ZnO blocks. Plasma luminosity at the contact of the ZnO block and ring-type electrode is more intensive than that at the contact of ZnO block and disk electrode. It is desirable to use the disk electrode with the proper contact area to reduce the plasma luminosity caused at the contact point between the ZnO block and electrodes.

• Korean Journal of Ichthyology
• /
• v.20 no.4
• /
• pp.255-262
• /
• 2008

The endemic Korean stumpy bullhead Pseudobagrus brevicorpus is a first-grade endangered wild fish as designated by the Ministry of Environment of Korea. As part of its restoration and proliferation effort, a histological study of this fish was carried out to investigate sex differentiation and gonadal development based on F1 generation individuals obtained by artificial breeding. On days 4~5 after hatching, a pair of genital ridges including clusters of primordial germ cells was observed between the gut and the mesonephric duct. On days 20 after hatching, the ovary began to initially differentiate and contained early oocytes with chromatin-nucleolus and peri-nucleolus stages on days 30~40 after hatching. As yolk material accumulated after day 80 from hatching, the oocytes grew increasingly large and were surrounded by a distinct follicular layer. On days 306 after hatching, the oocytes grew toward a mature ovum. In the males, the testis was distinguished by emergence of spermatogonium cells on 25 days after hatching, and day 40 after hatching it contained a small number of seminal lobes forming cysts. From 173 days after hatching, the testis consisted of numerous enlarged seminal lobes including spermatocytes and spermatids. Over 14 months after hatching, some seminal lumens were filled with spermatozoa.

• The Journal of Korean Academy of Prosthodontics
• /
• v.45 no.5
• /
• pp.611-620
• /
• 2007

Statement of problem: Second-generation indirect composite resins have been improved flexural strength, compressive strength, hydrolytic degradation resistance, wear resistance compared to first-generation indirect composite resins, but there are still some problems as hydrolysis and low wear resistance. Some manufacturers claim that wear resistance of their materials has been improved, but little independent study has been published on wear properties of these materials and the properties specified in the advertising materials are largely derived from in-house or contracted testing. Purpose: This study was to evaluate the wear of indirect composite resins (SR Adore, Sinfony, Tescera ATL) and gold alloy against the human enamel. Material and method: Extracted human incisors and premolars were sectioned to $2{\times}2{\times}2mm$ cube and embedded in the clear resin and formed conical shaped antagonist to fit the jig of pin-on-disk tribometer. Total 20 antagonists were stored in distilled water. Five disk samples, 24mm in diameter and 1.5mm thick, were made for each of three groups of indirect composite resins and gold alloy group, and polished to #2,000 SiC paper on auto-polishing machine. Disk specimens were tested for wear against enamel antagonists. Wear test were conducted in distilled water using a pin-on-disk tribometer under condition (sliding speed 200rpm contact load 24N, sliding distance 160m). The wear of the enamel was determined by weighing the enamel antagonist before and after test, and the weight was converted to volumes by average density. The wear tracks were analyzed by scanning electron microscopy and surface profilometer to elucidate the wear mechanisms. Statistical analysis of the enamel wear volume, wear track depth and wear tract width of disk specimens were accomplished with one-way ANOVA and the means were compared for significant differences with Scheffe's test. Results: 1. The enamel wear was most in gold alloy, but there were no statistically significant differences among all the groups (P>.05). 2. In indirect composite resin groups, the group to make the most shallow depth of wear tract was Sinfony, followed by Tescera ATL, SR Adoro (P<.05). Gold alloy was shallower than Sinfony, but there was no statistically significant difference between Sinfony and gold alloy (P>.05). 3. The width of wear tract of SR Adore was larger than the other groups (P<.05), and there were no statistically significant differences among the other groups (P>.05). 4. SEM analysis revealed that Sinfony and gold alloy showed less wear scars after test, Tescera ATL showed more wear scars and SR Adore showed the most. Conclusion: Within the limits of this study, Sinfony and gold alloy showed the least wear rates and showed similar wear patterns.

• Journal of the Economic Geographical Society of Korea
• /
• v.19 no.4
• /
• pp.694-711
• /
• 2016

This study analyzes the spatial characteristics of knowledge industry which has shown relatively rapid growth in the low-growth economy situation in recent years. In particular, we catch hold of the locational characteristics of the knowledge service industry which occupies the highest ratio by professional-expert jobs favoured by young generations, as well as estimate their occupational employment opportunities. By applying Location Quotient(LQ) and LISA, we reveal the spatial distribution patterns of publishing business, information service business and education service business in the Seoul Metropolitan area, and examine the changes in the spatial patterns during the last ten years. In order to understand the socio-economic factors which explain their locations, we apply the stepwise multiple regression analysis. Furthermore, we predict the changes distribution of Knowledge service industrial employment by applying Markov Chain Model. As the result, we found their clusters at the specific locations, while there is the significant variations in the socio-economic variables related their locations respectively. The related job opportunities of the knowledge service businesses in the Seoul Metropolitan area are predicted steady growth trend for the next four years, even though dull or stagnant trend is expected for other industries. This study provides basic resources to the planning for young generation employment problem.