• Restorative Dentistry and Endodontics
• /
• 제22권1호
• /
• pp.244-253
• /
• 1997

During preparation of narrow curved canals, procedural accidents such as, ledge, zipping, and transportation are frequently encountered and may lead to failure of endodontic therapy. To reduce these procedural errors and efficiently manage curved canals, various modifications in instrumentation technique and the design and flexibility of instruments have been advocated. This study compared the maintenance of the original canal curvature, cross sectional canal shape, and preparation time during instrumentation with stainless steel hand (K-Flexo) file, and nickel-titanium rotary files (Profile and Lightspeed). Thirty resin blocks with simulated curved canals of 20~25 degrees were used and divided into three groups of 10 each. In group 1, canals were instrumented using a quarter turn/pull technique with K-Flexofiles. Group 2 canals were prepared with rotary NiTi Profiles. Group 3 was prepared with rotary NiTi Lightspeed instrument. Before and after instrumentation, all canals were scanned using stereo microcope, FlexCam camera, and Photoshop 3.0 computer program. The results were as follows : 1. All groups showed some loss of canal curvature after instrumentation. Average loss of canal curvature was 8.6 degrees for K-Flexofile, 7.7 degrees for Profile, and 5.8 degrees for Lightspeed. Lightspeed exhibited significantly less curvature loss than K-Flexofile (p<0.05). 2. At the apical 1-mm level, Profile produced significantly rounder canals than Lightspeed (p<0.05). At the 3-mm level, Profile and Lightspeed exhibited significantly rounder canals than K-Flexofile (p<0.05). 3. Preparation with Lightspeed was significantly faster than Profile and K-Flexofile, and Profile was faster than K-Flexofile (p<0.05). 4. There was no significant difference in incidence of zipping between the hand K-Flexofile and rotary NiTi (Profile and Lightspeed) instruments. Most of apical canals were slightly widened near the apical foramen. As a results of this study, rotary NiTi instruments are superior to the K-Flexofile in regard to the maintenance of original canal curvature, cross-sectional shape and preparation time. But more investigations and studies should be needed to evaluate the ideal canal instrumentation.

• 플랜트 저널
• /
• 제12권1호
• /
• pp.29-36
• /
• 2016

최근 늘어가는 에너지 수요를 화석연료에만 의존 할 수 없게 되면서 대체 에너지의 중요성이 대두되고 있으며, 이러한 상황에서 유기랭킨 사이클(Organic Rankine Cycle, 이하 ORC)등 산업체 폐열, 태양열, 지열, 해수 온도차 등의 저등급 에너지를 효과적으로 활용하기 위한 많은 연구가 진행되고 있다. 본 연구에서는 지역난방 축열시 회수수를 혼합하지 않고 ORC를 이용하여 하부사이클을 구성하여 성능해석 상용프로그램으로 작동유체 및 운전특성을 예측하였다. 지역난방수 운전조건인 열원 온도 $120^{\circ}C$, 열원 유량 $163m^3/h$(회수수 유량을 고려한 값)로 하고 이 온도에 적합한 다수의 작동유체를 선정하여 성능해석을 수행하였으며, 최고의 성능이 나타난 R245fa의 경우 269.2kW출력과 6.37%효율을 얻을 수 있었다. 또한 ORC 시스템의 응축기 압력변화에 따라 지역난방 회수수 온도가 $57.3{\sim}85^{\circ}C$범위에 형성됨으로서 보일러 입구온도상승에 따른 연료 절감 효과가 예상되었다.

• 한국운동역학회지
• /
• 제15권4호
• /
• pp.85-95
• /
• 2005

The purpose of this study was to investigate the relations between the segments of the body, the three dimensional anatomical angle during One Hand Backhand Stroke and Two Hand Backhand in tennis. For the movement analysis three dimensional cinematographical method(APAS) was used and for the calculation of the kinematic variables a self developed program was used with the LabVIEW 6.1 graphical programming(Johnson, 1999) program. By using Eular's equations the three dimensional anatomical Cardan angles of the joint and racket head direction were defined. 1. In three dimensional maximum linear velocity of racket head the X axis and Y axis(horizontal direction) showed $-11.04{\pm}2.69m/sec$, $-9.31{\pm}0.49m/sec$ before impact, the z axis(vertical direction) maximum linear velocity of racket head did not show at impact but after impact this will resulted influence upon hitting ball. It could be suggest that Y axis velocity of racket head influence on ball direction and z axis velocity influence on ball spin after impact. The stance distance between right foot and left foot was mean $75.4{\pm}5.86cm$ during one hand backhand stroke and $72.6{\pm}4.67cm$ during two hand backhand stroke. 2. The three dimensional anatomical angular displacement of trunk in interna rotation-external rotation showed most important role in backhand stroke. and is follwed by flexion-extension. the three dimensional anatomical angular displacement of trunk did not show significant difference between one hand backhand stroke and two hand backhand stroke but the three dimensional anatomical angular displacement of trunk was bigger than one hand backhand stroke. 3. while backhand stroke, the flexion-extension and adduction-abduction of right shoulder joint showed significant different between one hand backhand stroke and two hand backhand stroke. the three dimensional anatomical angular displacement of right shoulder joint showed more flex and abduct in one hand backhand stroke. 4. The three dimensional anatomical angular displacement of left shoulder showed flexion, adduction, and external rotation at impact. after impact, The angular displacement as adduction-abduction of left shoulder changed motion direction as abduction. angular displacement of left shoulder as flexion-extension showed bigger than the right shoulder.

• 대한조선학회논문집
• /
• 제54권2호
• /
• pp.151-160
• /
• 2017

Growing demand and rapid development of the synthetic fiber rope in mooring system have taken place since it has been used in deep water platform lately. Unlike a chain mooring, synthetic fiber rope composed of lightweight materials such as Polyester(polyethylene terephthalate), HMPE(high modulus polyethylene) and Aramid(aromatic polyamide). Non-linear stiffness and another failure mode are distinct characteristics of synthetic fiber rope when compared to mooring chain. When these ropes are exposed to environmental load for a long time, the length of rope will be increased permanently. This is called 'the creep phenomenon'. Due to the phenomenon, The initial characteristics of mooring systems would be changed because the length and stiffness of the rope have been changed as time goes on. The changed characteristics of fiber rope cause different mooring tension and vessel offset compared to the initial design condition. Commercial mooring analysis software that widely used in industries is unable to take into account this phenomenon automatically. Even though the American Petroleum Institute (API) or other classification rules present some standard or criteria with respect to length and stiffness of a mooring line, simulation guide considers the mechanical properties that is not mentioned in such rules. In this paper, the effect of creep phenomenon in the fiber rope mooring system under specific environment condition is investigated. Desiged mooring system for a Mobile Offshore Drilling Unit(MODU) with HMPE rope which has the highest creep is analyzed in a time domain in order to investigate the effects creep phenomenon to vessel offset and mooring tension. We have developed a new procedure to an analysis of mooring system reflecting the creep phenomenon and it is validated through a time domain simulation using non-linear mooring analysis software, OrcaFlex. The result shows that the creep phenomenon should be considered in analysis procedure because it affects the length and stiffness of synthetic fiber rope in case of high water temperature and permanent mooring system.

• 한국산학기술학회논문지
• /
• 제18권6호
• /
• pp.736-741
• /
• 2017

본 논문은 회전익 항공기의 와이퍼 시스템의 설계 개선에 관한 연구이다. 국내 회전익 항공기의 우천환경 운용 시, 와이퍼 닦임 성능 저하 및 떨림 현상이 발생하였다. 와이퍼 시스템은 크게 와이퍼 암 조립체, 전동기, 와이퍼 변환기 조립체, 플랙스 드라이브로 구성되며, 와이퍼 시스템에 문제가 발생하면 우천환경의 작전에 제한사항이 발생하여 작전능력이 감소한다. 이러한 와이퍼 시스템의 문제를 야기한 원인은 크게 2가지로 검토되었으며, 첫번째 사유는 항공기 기동조건에서 와이퍼 암에 작용하는 부상력 때문이며, 두번째는 구성품들의 과다한 유격 때문이다. 이 2가지 문제를 개선하기 위해서 본 연구가 수행되었으며, 4가지의 와이퍼 구성품 중 와이퍼 암을 개선하였다. 개선 내용으로는 와이퍼 암의 누름압(스프링 장력) 증가, 기어 공차 개선, 재질 및 형상 변경이 수행되었다. 개선형상의 검증은 구성품 단위 내구성 시험, 항공기 지상 시험, 비행 시험이 수행되었으며, 설계 개선된 와이퍼 암을 장착하였을 시 닦임 성능 및 유격문제가 해소된 것을 확인 할 수 있었다. 닦임성능은 육안으로 확인하였으며, 유격문제는 와이퍼 작동거리를 측정하여 확인하였다. 현재 국내 회전익 항공기는 개선 형상을 적용하여 문제없이 운용하고 있으며, 이러한 설계 개선 과정은 향후 회전익 항공기 개발 시 유용한 참고자료가 될 것이다.

• Restorative Dentistry and Endodontics
• /
• 제21권2호
• /
• pp.619-627
• /
• 1996

There are increasing use of composite resin in the posterior teeth and the new indirect inlay technique was introduced for compensating much troubles faced in direct technique. Many researchers insisted that overall properties of restorative materials were enhanced by an additional curing but this technique still has a problems about using cement material. Resin inlay obtains retention force from friction and another adhesion to tooth structure. A shape of cavity preparation was noted but studies about cement thickness and bond strength with cavity divergency are rare. The purpose of this study is to assess the effect of cavity divergency on cement thickness and bond strength of resin inlay. Cavities, which divergency was $6^{\circ}$, $16^{\circ}$, and $26^{\circ}$ in each group, were prepared and their divergency was verified by Adobe Photoshop program through the image capture with stereo microscope and FlexCam. Inlays were fixed into the cavities with a resin cement, Superbond and were handled under chemical (in 75% ethanol for 24 hrs.) and thermal stress (500 cycles from $5^{\circ}$ to $55^{\circ}C$). MXT 70 (x400) was used for measuring the cement thickness and bond strength was evaluated with a universal testing machine. Following results were obtained : 1. The cement thickness in Mean (S.D.) were; 35.58 (10.31)${\mu}m$ in $6^{\circ}$ group, 35.97 (10.49)${\mu}m$ in $16^{\circ}$ group, and 41.43 (9.33)${\mu}m$ in $26^{\circ}$ group. But there was no significant difference between groups. 2. The bond strength in Mean (S.D.) were ; 33.18 (5.53)kg in $6^{\circ}$ group, 23.47 (13.40)kg in $16^{\circ}$ group, and 19.75 (10.48)kg in $26^{\circ}$ group. $6^{\circ}$ group showed significantly higher value compared to $16^{\circ}$ and $26^{\circ}$ groups (p<0.05). Although the results of this study indicate $6^{\circ}$ divergency will be good for resin inlay, cavity preparation with this type will have lots of difficulties in manufacturing, try-in, and cementation procedures, such as deformation. So it is concluded that $16^{\circ}$ divergent cavity preparation is recommended in resin inlay technique.

• 한국수산과학회지
• /
• 제31권1호
• /
• pp.114-120
• /
• 1998

밀어 어미를 경상남도 김해군 상동면 매리에 위치한 하천에서 끌망과 쪽대을 사용하여 채집하여 사육하여 1995년 2월부터 5월까지 6차례에 걸쳐 산란행동과 난발생 과정을 관찰하였으며, 부화한 자어를 사육하면서 성장에 따른 형태발달을 관찰하였다. 1. 산란된 알은 수조내의 작은 돌 아랫면에 거의 원형에 가깝게 한층으로 조밀하게 매달려 있었으며, 방정후 수컷은 알을 보호하였다. 2. 수정난은 난경이 $1.28\~$1.56\times0.62\~0.67mm$로 부착사를 지닌 투명한 침성란으로 많은 소유구를 가지고 있었다. 3. 부화에 소요된 시간은 사육수온 $16.0\~18.0^{\circ}C$ (평균 $17.0^{\circ}C$)에서 수정후 146시간 30분부터 부화하기 시작하였다. 4. 밀어의 알은 발생 후반에 배체의 머리 부분이 난황의 선단부를 향하는 정상난과 반대로 난막의 기부, 즉 부착사 쪽을 향하는 역자난이 출현하였다. 5. 부화직후의 자어는 전장 $3.10\~3.30mm$ (평균 3.22 mm)로 입과 항문이 열려있지 않았고, 흑색소포는 부레위, 항문 주변, 꼬리 중앙부분의 배쪽에 산재되어 있었으며, 근절수는 $25\~27$개 였다. 6. 부화후 $3\~4$일째의 자어는 전장 $3.30\~3.85mm$(평균 3.60mm)로 난황과 유구가 거의 흡수되어 입과 항문이 열리고, rotifer를 먹기 시작하였으며, 후기자어기로 이행하였다. 7 부화후 $20\~22$일째 개체는 평균 전장 5.85mm로 성장하였으며, 척소미단이 $45^{\circ}$ 정도로 위로 굽어져 있었다.

• 대한한의학원전학회지
• /
• 제3권
• /
• pp.151-217
• /
• 1989

In this thesis, I intend to study the translational and clinical interpretation through the theory of Ja-Yeol, and reached the following conclusions. 1. Liver-Heat-Disease due to absess of the function of expelling and lifting off, that Liver-Yang cannot lift up to upper-warmer, and stagnate liver. I think the symptoms of yellowish urine, abdominal pain, somnolence, fever belong to the syndrome of 'Gi-Bun(氣分)', and the symptoms of ravings with surprising, distending pain of hypochondrium, restless involuntary movement of the limbs, unable to lie flat belong to the syndrome of 'Hyeol-Bun(血分)'. 2. Heart-Heat-Disease due that 'Eum-Gi(陰氣)' in heart cannot lay down and reach to stagnate at heart, inner part. I think the symptoms of unjoy, acute cardiac pain, fidgetiness, well-nausea, headeche, reddish face, anhidrosis, etc. reveal with Heart-Heat-Disease. 3. Spleen-Beat-Disease due that 'Eum-Gi' in spleen cannot lay down and Yin of spleen changs heat. I think the symptoms of heaviness of head, cheek pain, fidgetiness, cyanosis, well-nausea, fever, not to let flex and reflex with back pain, diarrhea with abdominal pain, left and right cheek pain reveal with Spleen-Heat-Disease. I think symptoms of fever, diarrhea with abdominal pain belong to the syndrome of Yin-exhausion. 4. Lung-Heat-Disease due to that 'Eum-Gi' in lung cannot lay down. When 'Wi-Gi(衛氣)' stagnates at external part, I think, the symptoms of intolerance to wind and cold, yellowish fur, fever reveal. When Wi-Gi stagnates at lung, inner part, I think, the symptoms of dispnea with cough, pain on chest and back, unable to breath deeply, hydrosis and chilling reveal. 5. Kidney-Heat-Disease, in that the symptoms of back pain, leg aching, extreme thirst and frequently drink, fever, pain and stiffness of nape, cooling and aching leg, heat on plantar pedis, not trying to speak reveal is regarded external heat disease of 'Tai-Yang-Gyeong's(太陽經)' disease that asthenic fever open 'Tai-Yang-Gyeong' and lift by not enough of 'Yang-Gi(陽氣)' lifeing up from Kidney space, the water space of five elements.

• 한국수산과학회지
• /
• 제29권4호
• /
• pp.497-502
• /
• 1996

1990년 3월, 경상북도 영덕군 강구면에 위치한 오십천과 경상남도 밀양시 밀양강에서 채집하여 인공수정한 난을 실험실로 운반하여 난발생과정과 부화자어의 성장에 따른 형태변화를 관찰한 결과는 다음과 같다. 1. 빙어의 수정난은 구형의 침성부착난으로 무색 투명하며, 난경은 $0.85\~1.05mm$ (평균 0.97mm, n=50)이다. 2. 부화에 소요된 시간은 평균 $16.5^{\circ}C$에서 약 170시간만에 부화한다. 3. 부화직후의 자어는 전장 $3.85\~4.25mm$ (평균 4.05 mm, n=10)로, 아직 입과 항문이 열려 있지 않고, 눈에 색소포가 착색되어 있으며, 근절수는 $52\~54$개이다. 4. 부화 $4\~5$일째의 자어는 전장이 $5.20\~5.65mm$ (평균 5.37mm, n=10)로 난황은 거의 흡수되고, 눈의 색소는 더욱 짙어진다. 5. 부화 20일째의 후기자어는 전장이 $8.20\~8.55\;mm$(평균 8.38mm, n=10)로 척색말단이 $45^{\circ}$ 각도로 위로 굽어진다. 6. 부화 25일째의 후기자어는 전장이 $9.15\~9.75mm$ (평균 9.63mm, n=10)로 등지느러미와 뒷지느러미에 각각 융기하기 시작하여 원기가 나타난다.

• 한국어류학회지
• /
• 제3권1호
• /
• pp.1-10
• /
• 1991

1988년(年) 7월(月), 부산시(釜山市) 강서구(江西區) 송정동(松亭洞) 연안(沿岸)에서 채포(採捕)한 성숙(成熟)한 친어(親魚)들을 사육(飼育) 중(中), 사육수조(飼育水槽) 내(內)에서 친어(親魚)의 산란행동(産卵行動)과 PVC 내벽(內壁)에 5회(回)에 걸쳐 자연산란(自然産卵)한 난(卵)을 대상(對象)으로 발생과정(發生過程) 및 부화(孵化)한 자어(仔魚)들을 사육(飼育)하면서 형태발달(形態發達)을 관찰(觀察)한 결과(結果)를 요약(要約)하면 다음과 같다. 1. 산란기(産卵期)의 수컷은 혼인색(婚姻色)이 나타나고, 산란상(産卵床)을 만들며, 텃세, 구애(求愛) 및 난(卵)을 보호(保護)하는 행동(行動)을 한다. 2. 수정란(受精卵)은 난경(卵徑)이 $0.93{\sim}0.96{\times}0.43{\sim}0.45\;mm$로 부착사(附着絲)를 지닌 투명한 침성란(沈性卵)이며, 다수(多數)의 소유구(小油球)를 가지고 있다. 3. 부화(孵化)는 사육수온(飼育水溫) $24.5{\sim}25.5^{\circ}C$에서 수정후(受精後) 약(約) 103시간(時間)만에 시작(始作)하여, 110시간(時間)에 완료(完了)하였다. 4. 부화직후(孵化直後)의 자어(仔魚)는 전장(全長) 2.04~2.10 mm로 복강(腹腔) 등쪽에 1실(室)의 부레가 분화(分化)되어 있고, 흑색소포(黑色素胞)는 부레 위, 이포(耳胞) 앞, 미부중앙(尾部中央) 및 복면(腹面)에 분포(分布)하며, 근절수(筋節數)는 8~9+16=24~25개(個)이다. 5. 부화후(孵化後) 4일(日)째의 자어(仔魚)는 전장(全長) 2.20~2.35 mm로 난황(卵黃)과 유구(油球)가 완전(完全)하게 흡수(吸收)되어 항문(肛門)이 열리며, 이 시기(時期)의 자어(仔魚)는 수조(水槽)의 상층(上層)과 중층(中層)을 활발(活潑)하게 유영(遊泳)하고, Rotifer를 섭이(攝餌)하기 시작(始作)한다. 6. 부화후(孵化後) 12일(日)째의 자어(仔魚)는 평균(平均) 전장(全長) 3.20 mm로 척색말단(脊索末端)이 $45^{\circ}$위로 굽어지고, 제(第)2등지느러미, 뒷지느러미, 꼬리지느러미 및 배지느러미가 형성(形成)된다. 7. 부화후(孵化後) 35일(日)째 개체(個體)는 전장(全長) 10.40~10.80 mm로 제(第)1등지느러미와 배지느러미가 완전(完全)하게 형성(形成)되어 저서생활(底棲生活)로 이행(移行)한다. 8. 부화후(孵化後) 50~60일(日)째 자어(仔魚)는 전장(全長) 15.37~20.25 mm로 종(種) 특유(特有)의 흑색반문(黑色斑紋)이 완성(完成)되고, 체표면(體表面)에는 비늘이 형성(形成)된다.