• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.165-165
• /
• 2000

The sunlight tracking and reflexing system can be divided into two parts. One is a sunlight tracking system and the other is a sunlight reflexing system. The sunlight tracking system detects an azimuth angie and an elevation angle of the sun using 2-axis sensor sun tracker. The sunlight reflexing system controls a reflection mirror to be reflected a sunlight at the target area after getting the azimuth angle and the elevation angle of the sun from the sunlight tracking system. We applied the fuzzy PID controller to control the reflexing mirror.

• International Journal of Aeronautical and Space Sciences
• /
• 제2권1호
• /
• pp.44-54
• /
• 2001

This paper describes the antenna alignment method of the tracking antenna system for LEO satellite. The purpose of the antenna alignment is to reduce the angular error due to the structural alignment and the monopulse null point alignment error. The angular error of 3 axis tracking system is the key performance parameter that should be minimized to accurately track satellite movement. The angular error is analyzed via a simulation and boresight measurement. The simulation is done with formulas to be derived from vector concept for 3-axis movement. The formulas of the structural alignment are verified by comparing the formula result with the field measurement. Also, the angular error due to monopulse null shift is obtained via boresight measurement. Based on the analyzed and measured results, the antenna alignment was performed and was verified via tracking test of operating LEO satellite.

• 제어로봇시스템학회논문지
• /
• 제15권12호
• /
• pp.1169-1174
• /
• 2009

In this paper, a prototype of implementable Sun tracking algorithm for mobile systems powered by alternative energy is proposed. The proposed system uses 2-axis tilt sensor and 3-axis magnetic sensor to measure orientation and posture of the system according to the horizon coordinates system, which are used to compensate tilt effects. Then through astronomical calculation using the present time and position informations obtained from GPS sensors, the calculated azimuth and altitude of the Sun in that location. The position of the Sun is converted to that of the mobile Sun tracking system coordinates and used to control A-axis and C-axis of the system.

• 한국태양에너지학회 논문집
• /
• 제29권1호
• /
• pp.38-43
• /
• 2009

In this paper. a prototype of a mobile Sun tracking system is proposed. The proposed system uses 2-axis tilt sensor and 3-axis magnetic sensor to measure the orientation and the posture of the system according to the horizontal system of coordinates, which are used to compensate the slope effects. Then through astronomical calculation using the time and position information obtained by GPS sensor the azimuth and altitude of the Sun from that location is calculated. The position of the Sun is converted to that of the mobile Sun tracking system coordinates and used to control A-axis and C-axis of the system.

• 제어로봇시스템학회논문지
• /
• 제1권1호
• /
• pp.58-62
• /
• 1995

Necessarily, it is required to analyze interfacial mechanism between tire and road for understanding tire wear, vehicle tracking and breaking. Therefore, there have been some efforts to measure 3-axis pressure and 2-axis displacement on tire road interface. But it was so hard to couple precisely measuring sensor and desired point on tire tread pattern block that it was impossible to analyze the mechanism on commercial tire with tread pattern. To overcome such a problem, a on-line measurement system is proposed in this paper. And an automatic control system is designed to test the tire with similar configuration of real vehicle driving.

• 한국태양에너지학회 논문집
• /
• 제29권2호
• /
• pp.39-46
• /
• 2009

Heliostat, as a mirror system tracking the sun's movement, is the most important subsystem determining the efficiency of solar thermal power plant. Thus the accurate sun tracking performance under the various hazardous operating condition, is required. This study presents a methodology of development of the solar ray tracing technique and the application of it in the analysis of sun tracking error due to the heliostat geometrical errors. The geometrical errors considered here are the azimuth axis tilting error and the elevation axis tilting error. We first analyze the geometry of solar ray reflected from the heliostat. Then the point on the receiver, where the solar ray reflected from the heliostat is landed, is computed and compared with the original intended point, which represents the sun tracking error. The result obtained shows that the effect of geometrical error on the sun tracking performance is varying with time(season) and the heliostat location. It also shows that the heliostat located near the solar tower has larger sun tracking error than that of the heliostat located farther.

• 한국산학기술학회논문지
• /
• 제13권10호
• /
• pp.4733-4739
• /
• 2012

본 논문에서는 태양과 태양전지 모듈이 법선을 이루도록 기존에 태양의 방위각 및 고도각을 제어하는 양축 추적시스템에 2개의 센서를 사용하였던 Double-sensor방식에서 1개의 센서로 방위각 및 고도각을 제어할 수 있는 One-sensor방식의 양축 추적시스템을 제안하였다. 그리고 제안한 추적시스템을 제작하여 시스템의 실제 운전을 실행하였다. 제안한 추적시스템은 1개의 센서를 이용하여 태양이 항상 법선을 이루면서 태양전지 모듈에 입사되게 제어하기 위해 방위각과 고도각을 제어하는 양축 추적시스템이다. 실험결과 가장 효율적인 운전과 불필요한 구동부의 동작을 방지하여 전력소모를 감소할 수 있었으며 고정식에 비해 본 논문에서 제안한 One-sensor방식의 양축 추적시스템이 약 23[%]의 발전효율이 증가함을 확인 할 수 있었다. 태양을 추적하여 더 많은 햇빛을 받게 하여 태양전지의 효율을 높이기 위하여 행해진 추적장치는 대형 방식에 많은 연구가 진행되어 왔다. 따라서 본 논문의 태양위치추적의 모니터링 시스템을 구축하여 지속적인 발전효율에 대한 실용화 연구를 통해 태양광발전시스템 보급에 큰 역할을 할 것이라 기대된다.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2002년도 춘계학술대회 논문집
• /
• pp.346-351
• /
• 2002

Several algorithm applied to single axis feed system with linear motor has been extensively reviewed in order to check the possible applicability to two axis system Among several factors considered, overshoot of the response was the most important one in minimizing position tracking error. Balance between overshoot and settling time has be adjusted to guarantee to best tracking performance.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2002년도 추계학술대회 논문집
• /
• pp.405-410
• /
• 2002

Linear motor food system control algorithm was extended to the two axis system. Among several factors considered, overshoot of the response was the most important one in minimizing position tracking error. Balance between overshoot and settling time has to be adjusted to guarantee to best tracking performance. Tracking route was carefully executed to eliminate the possible error during the machining process. Even though there exists slight discrepancy between desired mute and cutting track at the corner, precision machining could be implemented using the cutting scheme introduced.

• 전기학회논문지
• /
• 제60권12호
• /
• pp.2386-2391
• /
• 2011

Tracking and detecting targets by the millimeter wave seeker is affected by moving of platform. In order to perform the tracking performance, stabilization of a millimeter wave seeker which consists of 2-axis gimbals was considered in this study. The feasibility of the analysis and the 2-axis gimbal servo system modeling design were verified along with some simulation results.